• Journal of the Korean GEO-environmental Society
• /
• v.3 no.2
• /
• pp.5-14
• /
• 2002

In this study, stress-deformation characteristics of buried pipe are studied. A numerical model, i.e., Egg-Cam Clay is introduced for the analysis of soft clay. Cam Clay model has a difficulty in analyzing soft clay that has two properties of shrinkage and swelling. Egg-Cam Clay model is modified format of Cam Clay model. In addition, Mohr-Coulomb model using finite element method is employed to verify effects of the geogrid, EPS geofoam. Stress deformation of several cases of pipe and other reinforcemnt material combinations are analyzed. Geofoam and geogrid have positive effects on the deformation characteristics.

• Journal of the Korean Ceramic Society
• /
• v.14 no.2
• /
• pp.95-103
• /
• 1977

Characteristics of Ham Pyong clay and clay-organic complexes were investigated by means of geological exploration, chemical analysis, X-ray diffraction, differential thermal analysis, electron microscopy, thermal mechanical analysis, cation exchange capacity and viscosity measurement. The results are as follows; 1) This caly is a transported clay which has black and white colors, and the amounts of deposit are estimated about 1, 600, 000M/T. 2) The major mineral phases identified by X-ray diffraction are kaolinite, sericite and halloysite and the minor phases are quartz and feldspar, these mineral phases can be seperated very easily by the elutriation method. 3) It was supposed that the black colored clay involved a certain clay-organic complexs by the mechanism of intercalation as well as surface absorption. 4) The clay-organic complexes in clay seemed to improve dispersity, to increase the fluidity of clay-water slips, to decrease the firing shrinkage and to promote the thermo-chemical reaction at temperature range up to 50$0^{\circ}C$, but not to effect on the resulted firing color.

• Economic and Environmental Geology
• /
• v.32 no.2
• /
• pp.151-159
• /
• 1999

This research was carried out to evaluate the possible usage of natural clay materials collected from the Kimpo landfill site and nearby clay mines as a clay liner material. In order to evaluate the possible usage as a clay liner material, specific gravity, pH, loss-on-ignition, organic carbon content and mineralogical composition of clay materials were measured. The Atterberg limit test and the size analysis were performed for the engineering classification and the prediction of hydraulic conductivity of clay materials. Caution exchange capacity and batch tests were also carried out for the assessment of attenuation capacity. Clay specimens of KPNCL, KP-1, KP-2 and SH were recommended as suitable clay linder materials from viewpoint of their basic quality and attenuation capacity.

• Journal of Korea Foundry Society
• /
• v.4 no.2
• /
• pp.89-95
• /
• 1984

A Study on the Mechanical Properties of Molding Sand with Various Water/Clay Ratio A standard sample of molding sand was prepared by adding a various amount of bentonite, which has water/clay ratio from 0.4 to 0.6, into artificial sand, Hanyoung #6. The results obtained by measuring the room temperature properties of green mold are as follows. 1. This compressive strength of green molds which have 4% and 10% of bentonite decreased with increasing water/clay ratio, but the maximum strengths of 4.3 (psi) and 7.2 (psi) were observed in the samples with 6%, 8% bentonite respectively when the water/clay is 0.45. 2. The optimum water/clay ratio for strength and permeability increased from 0.4 to 0.5 with increasing clay. 3. The green compressive strength was proportional to the hardness. 4. Deformation increased with increasing water/clay ratio. 5. Flowability decreased with increasing water/clay ratio and clay content in molding sand.

• Architectural research
• /
• v.26 no.2
• /
• pp.21-29
• /
• 2024

The use of clay bricks dates back to ancient Egypt. From the stamped clay tablets to the works of contemporary buildings, clay was significant building material for both cultural and pragmatic reasons. In the making of modern architecture in Egypt, Hassan Fathy employed clay as primary substance for building. This study demonstrates the use of clay bricks in ancient Egypt and in the works of Hassan Fathy. This study further exemplifies that the use of clay bricks is still valid in contemporary architecture in Upper Egypt and Siwa Oasis. The use of clay bricks provides structural durability and efficient insulation in the arid regions, and it also adheres to the vernacular building traditions. This paper proves that the use of clay bricks plays a crucial role in the making of modern architecture in Egypt for its pertinence in the historic continuity and practicality.

• Clean Technology
• /
• v.12 no.1
• /
• pp.11-18
• /
• 2006

In this study, aqueous polyurethane dispersion(PUD) was synthesized using polyhexamethylene carbonate glycol (PHMCG) as soft segment, isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as hard segment. Also, polyurethane/clay nanocomposites were prepared by adding pristine montmorillonite (PM) and organically modified clays, C15A and C30B into PUD. The degree of clay dispersion in the nanocomposites was investigated using XRD and the physical and thermal properties were examined through UTM and TGA. These results showed that nanocomposites with C15A gave higher physical and thermal properties than those with C30B or PM. As a result, the properties of nanocomposites were observed to vary depending on the types of clay modifiers and clay contents.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.3
• /
• pp.241-247
• /
• 2013

Yellow clay dispersion has been applied to minimize fisheries impact by the red tide Cochlodinium polykrikoides blooms in Korean coasts since 1995. The present preliminary study documents the effect of yellow clay on Korean rockfish, Sebastes schlegelii, in terms of oxygen consumption rate (OCR). The OCR in the low clay suspension (0.05 and 0.23 %, w/w) showed normal level compared to the control. In contrast, the OCR for each one of three replicates in the high clay suspension (1.16 and 5.58 %, w/w) was not returned to the previous level that clay was not treated, indicating that high clay suspension (${\geq}1.16%$, w/w) might give negative effect on Korean rockfish. Overall, this result suggests that field application of clay to control Harmful Algal Blooms (HABs) may not give impact on Korean rockfish once the clay is dispersed in a low concentration (${\leq}0.23%$). In order to understand the changes of OCR in the repeated exposure to clay, it is required to do further studies on the changes of OCR when the fish is exposed to clay repeatedly after recovery in the normal seawater.

• Membrane Journal
• /
• v.27 no.3
• /
• pp.284-289
• /
• 2017

In this study, natural clay as a filler was systematically integrated into polysulfone nanofibers to prepare polysulfone/clay composite membranes with mechanical properties. The composite nanofibers were formed by electrospinning of a mixed precursor of polysulfone and clay. The pore size of the composite membranes was adjusted by simply controlling the number of layers of nanofibers. The overall membrane properties were examined by SEM, contact angle, pore characteristics, tensile strength and water flux. In particular, the presence of clay within the nanofibers was confirmed with SEM images and the mechanical property of the composite nanofiber membranes was examined by tensile strength measurements. Thus, the prepared composite membranes were expected to be utilized for water treatment system.

• Journal of the Korean Ceramic Society
• /
• v.37 no.2
• /
• pp.122-127
• /
• 2000

The thermal expansion, thermal stability, mechanical strength and infrared radiative property of Al2TiO5-clay composites, prepared from synthesized Al2TiO5 and clay, were investigated to develop a material for far infrared radiators. The emittance of composites containing 10~50 wt% clay, heated at 1,20$0^{\circ}C$ for 3 h, increased with increasing clay content and emittance was about 0.3 and 0.92 in the ranges of 3,400~2,500 cm-1 and 2,500~400cm-1, respectively. The bulk density and bending strength of the Al2TiO5-clay composites increased with increasing clay content. 50 wt% Al2TiO5-50 wt% clay composite, heat-treated at 1,20$0^{\circ}C$, had an adequate strength for infrared radiators; 80 MPa. The degree of thermal expansion hysteresis decreased with increasing clay content and the mean thermal expansion coefficient increased with increasing clay content. The thermal expansion coefficient of 50 wt% Al2TiO5-50 wt% clay composite heated at 1,20$0^{\circ}C$ was 5.78$\times$10-6/$^{\circ}C$.

• Corrosion Science and Technology
• /
• v.22 no.1
• /
• pp.1-9
• /
• 2023

This work studied the inhibitory effect of the combination of benzoate-intercalated hydrotalcite (HT-BZ) and Ce³⁺-loaded clay (Clay-Ce) on carbon steel (CS). HT-BZ was prepared by the co-precipitation method and Clay-Ce was fabricated by a cation exchange reaction. HT-BZ and Clay-Ce were assessed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) coupled with zeta potential measurement. Electrochemical measurements coupled with scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX) were used for studying the inhibitory action of the mixture of HT-BZ and Clay-Ce on steel electrodes immersed in 0.1 M NaCl. For comparison, the inhibitory effect of HT-BZ or Clay-Ce alone was also evaluated. The results showed that HT-BZ combined with Clay-Ce provided synergistic inhibition of the CS substrate. The mixture of 0.5 g/L HT-BZ + 0.5 g/L Clay-Ce provided 93.5% inhibition efficiency. The protective mechanism of the HT-BZ + Clay-Ce mixture consisted of the reaction of released BZ and Ce³⁺ and the deposition of HT-BZ and Clay-Ce structures on the CS substrate.