• 한국세라믹학회지
• /
• 제14권2호
• /
• pp.95-103
• /
• 1977

Characteristics of Ham Pyong clay and clay-organic complexes were investigated by means of geological exploration, chemical analysis, X-ray diffraction, differential thermal analysis, electron microscopy, thermal mechanical analysis, cation exchange capacity and viscosity measurement. The results are as follows; 1) This caly is a transported clay which has black and white colors, and the amounts of deposit are estimated about 1, 600, 000M/T. 2) The major mineral phases identified by X-ray diffraction are kaolinite, sericite and halloysite and the minor phases are quartz and feldspar, these mineral phases can be seperated very easily by the elutriation method. 3) It was supposed that the black colored clay involved a certain clay-organic complexs by the mechanism of intercalation as well as surface absorption. 4) The clay-organic complexes in clay seemed to improve dispersity, to increase the fluidity of clay-water slips, to decrease the firing shrinkage and to promote the thermo-chemical reaction at temperature range up to 50$0^{\circ}C$, but not to effect on the resulted firing color.

• 자원환경지질
• /
• 제32권2호
• /
• pp.151-159
• /
• 1999

This research was carried out to evaluate the possible usage of natural clay materials collected from the Kimpo landfill site and nearby clay mines as a clay liner material. In order to evaluate the possible usage as a clay liner material, specific gravity, pH, loss-on-ignition, organic carbon content and mineralogical composition of clay materials were measured. The Atterberg limit test and the size analysis were performed for the engineering classification and the prediction of hydraulic conductivity of clay materials. Caution exchange capacity and batch tests were also carried out for the assessment of attenuation capacity. Clay specimens of KPNCL, KP-1, KP-2 and SH were recommended as suitable clay linder materials from viewpoint of their basic quality and attenuation capacity.

• 한국주조공학회지
• /
• 제4권2호
• /
• pp.89-95
• /
• 1984

A Study on the Mechanical Properties of Molding Sand with Various Water/Clay Ratio A standard sample of molding sand was prepared by adding a various amount of bentonite, which has water/clay ratio from 0.4 to 0.6, into artificial sand, Hanyoung #6. The results obtained by measuring the room temperature properties of green mold are as follows. 1. This compressive strength of green molds which have 4% and 10% of bentonite decreased with increasing water/clay ratio, but the maximum strengths of 4.3 (psi) and 7.2 (psi) were observed in the samples with 6%, 8% bentonite respectively when the water/clay is 0.45. 2. The optimum water/clay ratio for strength and permeability increased from 0.4 to 0.5 with increasing clay. 3. The green compressive strength was proportional to the hardness. 4. Deformation increased with increasing water/clay ratio. 5. Flowability decreased with increasing water/clay ratio and clay content in molding sand.

• 청정기술
• /
• 제12권1호
• /
• pp.11-18
• /
• 2006

poly[hexamethylene carbonate]glycol(PHMCG)과 isophorone diisocyanate (IPDI), dimethylol propionic acid(DMPA)를 이용하여 수분산성 폴리우레탄을 합성하였다. 또한 여기에 나노 clay(PM) 및 이를 각기 다른 유기화제로 개질시킨 C15A와 C30B를 첨가하여 폴리우레탄/clay 나노복합재료를 제조하였다. 제조된 나노복합재료에서의 clay의 분산정도를 XRD를 이용하여 조사하였으며 clay가 첨가된 경우의 기계적 물성 및 열적성질을 UTM 과 TGA를 통하여 분석한 결과, C15A가 첨가된 경우 나노clay가 폴리우레탄에 가장 잘 분산된 것으로 관찰되었으며, 기계적 물성과 열적 물성이 C30B 또는 PM을 첨가한 경우보다 높게 측정되었다. 이로부터 clay에서 개질유기화제의 종류 및 함량이 나노복합재료의 최종물성에 영향을 주는 것을 알 수 있었다.

• 해양환경안전학회지
• /
• 제19권3호
• /
• pp.241-247
• /
• 2013

Yellow clay dispersion has been applied to minimize fisheries impact by the red tide Cochlodinium polykrikoides blooms in Korean coasts since 1995. The present preliminary study documents the effect of yellow clay on Korean rockfish, Sebastes schlegelii, in terms of oxygen consumption rate (OCR). The OCR in the low clay suspension (0.05 and 0.23 %, w/w) showed normal level compared to the control. In contrast, the OCR for each one of three replicates in the high clay suspension (1.16 and 5.58 %, w/w) was not returned to the previous level that clay was not treated, indicating that high clay suspension (${\geq}1.16%$, w/w) might give negative effect on Korean rockfish. Overall, this result suggests that field application of clay to control Harmful Algal Blooms (HABs) may not give impact on Korean rockfish once the clay is dispersed in a low concentration (${\leq}0.23%$). In order to understand the changes of OCR in the repeated exposure to clay, it is required to do further studies on the changes of OCR when the fish is exposed to clay repeatedly after recovery in the normal seawater.

• 멤브레인
• /
• 제27권3호
• /
• pp.284-289
• /
• 2017

본 연구에서는 복합막의 물성향상을 위해 clay를 도입한 polysulfone 나노섬유 복합막을 제조하였다. Polysulfone/clay 복합막은 clay가 들어간 N,N-dimethyl acetamide와 acetone 혼합용매에 polysulfone을 첨가한 후 전기방사법을 이용하여 제조하였으며, 제조된 나노섬유 복합막은 적층수를 변화해 기공크기를 조절한 후 사용하였다. 전반적인 분리막의 특성은 SEM, contact angle, 기공특성, tensile strength, water flux 분석을 사용하여 고찰하였다. 특히 SEM image로 clay의 도입을 확인하였으며 contact angle 측정을 통해 표면이 개질된 결과를 확인할 수 있었다. 그리고 clay의 도입량에 따른 복합막의 기계적 물성을 확인하였다. 따라서 본 연구에서 제조된 분리막은 수처리용 분리막으로 충분히 활용 가능할 것으로 판단된다.

• 한국세라믹학회지
• /
• 제37권2호
• /
• pp.122-127
• /
• 2000

The thermal expansion, thermal stability, mechanical strength and infrared radiative property of Al2TiO5-clay composites, prepared from synthesized Al2TiO5 and clay, were investigated to develop a material for far infrared radiators. The emittance of composites containing 10~50 wt% clay, heated at 1,20$0^{\circ}C$ for 3 h, increased with increasing clay content and emittance was about 0.3 and 0.92 in the ranges of 3,400~2,500 cm-1 and 2,500~400cm-1, respectively. The bulk density and bending strength of the Al2TiO5-clay composites increased with increasing clay content. 50 wt% Al2TiO5-50 wt% clay composite, heat-treated at 1,20$0^{\circ}C$, had an adequate strength for infrared radiators; 80 MPa. The degree of thermal expansion hysteresis decreased with increasing clay content and the mean thermal expansion coefficient increased with increasing clay content. The thermal expansion coefficient of 50 wt% Al2TiO5-50 wt% clay composite heated at 1,20$0^{\circ}C$ was 5.78$\times$10-6/$^{\circ}C$.

• Corrosion Science and Technology
• /
• 제22권1호
• /
• pp.1-9
• /
• 2023

This work studied the inhibitory effect of the combination of benzoate-intercalated hydrotalcite (HT-BZ) and Ce³⁺-loaded clay (Clay-Ce) on carbon steel (CS). HT-BZ was prepared by the co-precipitation method and Clay-Ce was fabricated by a cation exchange reaction. HT-BZ and Clay-Ce were assessed by scanning electron microscopy (SEM) and X-ray diffraction (XRD) coupled with zeta potential measurement. Electrochemical measurements coupled with scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX) were used for studying the inhibitory action of the mixture of HT-BZ and Clay-Ce on steel electrodes immersed in 0.1 M NaCl. For comparison, the inhibitory effect of HT-BZ or Clay-Ce alone was also evaluated. The results showed that HT-BZ combined with Clay-Ce provided synergistic inhibition of the CS substrate. The mixture of 0.5 g/L HT-BZ + 0.5 g/L Clay-Ce provided 93.5% inhibition efficiency. The protective mechanism of the HT-BZ + Clay-Ce mixture consisted of the reaction of released BZ and Ce³⁺ and the deposition of HT-BZ and Clay-Ce structures on the CS substrate.

• 한국세라믹학회지
• /
• 제45권7호
• /
• pp.387-394
• /
• 2008

The Physical property changes of calcined clay by carburization were investigated studied. The carburization mechanism is the penetration of carbon which occurred during incomplete fuel combustion into crevice of clay structure. The experiments for elasticity and freeze-thaw resistance were conducted, and the results can be summarized as follows: Dynamic modulus of elasticity and also freeze-thaw resistance of calcined clay by carburization treatment increased more than 92% after testing 300 cycle, which was more improved than 88% of calcined clay. Therefore, it can decrease the possibility of winter-sowing, which is one the weakness of calcined clay. It is on the basis of the fact that the porosity of calcined clay by carburization treatment is about 12%, which indicates smaller pore spaces comparing with the 14% of porosity of calcined clay and those values were calculated by apparent porosity show and also supported by SEM images. Infrared emissivity of calcined clay by carburization treatment and calcined clay were respectively 0.92 and 0.9l at $80^{\circ}C$. However, those values were 0.91 and 0.88 at $200^{\circ}C$, which means infrared emissivity of calcined clay by carburization treatment shows 3.6% higher than the calcined clay. Moreover, within the wavelength range from 3 to $7\;{\mu}m$, while the calcined clay had low infrared emissivity, the calcined clay by carburization treatment had increased infrared emissivity. It is inferred that it was affected by carbon element that has high infrared absorptivity within this wavelength range.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.19-36
• /
• 1997

This paper discusses the reduction and subsequent recovery and increase of shear strength of clay in the vicinity of soil-cement column. Laboratory and field tests were conducted to investigate the effects on surrounding clay during and after soil-cement column installation in soft Ariake clay. Discussions were made on the mechanism of strength changes of clay by considering the thixotropic recovery, reconsolidation effect, penetration of cement slurry and diffusion of exchangeable cations. On the basis of field and laboratory observations, 10 days after column installation, the decreased shear strength of surrounding clay during mixing was recovered and 30 days later, shear strength of surrounding clay increased 30% by average. Therefore, it is recommended that the increase of shear strength of clay can be taken into consideration in the bearing capacity and stability analysis of the composite ground.