• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.276-286
• /
• 2013

This study was performed to investigate the contents characteristics of hazardous oil wastes and wastes of liquid fuels from different industrial process. In order to establish a hazardous waste list, samples of various industrial discharge have been analyzed for 16 non-regulated inorganic hazardous substances (i.e., Cu, Pb, Cd, CN, Hg, As, T-Cr, $Cr^{6+}$, Sb, Ni, F, V, Ba, Zn, Be, Se). In more detail, hazardous waste samples including waste hydraulic oils, waste engine, gear and lubricating oils, waste insulating and heat transmission oils, bilge oils, oil/water separator contents processing were collected from 37 workplaces and analyzed. We observed that the most of the inorganic substances exceeded the proposed criteria in many samples. Especially the concentration of Sb in heat transmission oil, bilge oil and gear & lubricating oils were ranged from 6 to 419 mg/kg whereas the proposed criteria is 50 mg/kg. The assessment result of hazardous waste in Korea according to the EWC showed that the out of 24 processes, 16 belongs to absolute entry and 8 belongs to mirror entry. In conclusion, we expect the outcome of this study to align the classification system of hazardous waste management in South Korea with international legislations, and consequently contribute to reduce environmental pollution as well as health risks by toxic wastes.

• Journal of The Korean Association For Science Education
• /
• v.27 no.4
• /
• pp.337-345
• /
• 2007

The purposes of this study are to investigate and compare the characteristics of classification criteria of secondary school students and science teachers in relation to the three statesof matter. For this research, 76 middle school students in the7th grade who studied microscopic viewpoints about classifying the state of matter for the first time, 69 high school students in the 12th grade who studied Chemistry I and IIcourses successfully, and 130 secondary school science teachers, through a questionnaire. As a result, while having learned the three states of matter in the microscopic viewpoints, the majority of middle school students showed a high percentage of classification in the macroscopic viewpoints. For high school students, their percentage of classification included highmicroscopic viewpoints about solid and gas, the percentage of classification included macroscopic viewpoints about liquid state as alsohigh. The secondary school teachers gave answers in the macroscopic viewpoints and microscopic viewpoints equally, but their answers were just representation of the viewpoints list without the meaningful connection of the two type of viewpoints. To solve these problems, It is necessary to form connective change from the macroscopic viewpoints to the microscopic viewpoints about the criteria for classifying the States of Matter and various educational efforts.

• The Research Journal of the Costume Culture
• /
• v.28 no.6
• /
• pp.787-800
• /
• 2020

This study aims to derive the criteria of folding techniques and their characteristics through analysis of literature and previous studies. This will be realized by performing a case study on male fashion design and folding. It will propose diverse directions and data for male fashion design, by making men's jackets using a folding technique. The concept and terms of folding were clarified through examination of existing literature and previous studies. Specifically, four pieces were created with motifs of the four seasons. Among the types of pleats expressed in the works, composition pleats include double ruffles, gathers, and draperies, while processed ones include box pleats, knife pleats, and accordion pleats. This study expresses continuity, fluidity, scalability, and ambiguity through the use of such pleats. The results of the production are as follows. First, in terms of the continuous use of regular and repetitive pleats, a possibility of rich pleats was confirmed because they varied depending on the gap between the pleat and target material. Second, in liquid but irregular pleats, diverse moods were created by the pleat movement. The overlapping of repeated pleats expresses diverse spaces and shapes in a 3D extended silhouette. Third, in pleat classification, ambiguity was confirmed with the use of continuous accordion pleats in the printed gradation fabric. It is anticipated that more diverse and creative designs could be created using more extended techniques in future studies.

• The Journal of Engineering Geology
• /
• v.14 no.2
• /
• pp.199-210
• /
• 2004

In this study, the physical and mechanical properties of the weathered shale soils distributed in the Hwasun area have been measured in the laboratory. The physical and mechanical properties of the weathered shale soils in the study area as follows: the specific gravity is 2.66 to 2.68, the liquid limit is 36.39 to 36.92(%), the plastic limit is 18.53 to 19.48(%), the plasticity index is 17.44 to 17.86 and soil classification is CL. The maximum dry unit weight and optimum moisture content as calculated by compaction test is 22.5 to 23% and 1.58 to $1.61t/\textrm{m}^3$, respectively. The result of direct shear testing show that cohesion in saturated and unsaturated conditions increases according to the increase of dry unit weight. Internal friction angle in an unsaturated condition increases with an increase of dry unit weight, but in a saturated condition, it increases after decreasing. When compares with engineering characteristics of tile weathered shale soils in the Daegu area (Kim et al., 1995), specific gravity is found to be similar, but the liquid and plastic limit of soil samples in this study area is slightly higher than those of soil samples in the Daegu area.

• Journal of ILASS-Korea
• /
• v.22 no.3
• /
• pp.122-128
• /
• 2017

Currently, the proportion of diesel vehicles in all automobile has grown significantly over the past few years. Air pollutant also grew up and became a social problem. In particular, the issue of NOx emissions caused by NOx high emission in real driving has become a global issue. Despite the fact that the regulatory and reduction project of the new vehicle is actively carried out, there are no existence regulations of In-use diesel vehicle's NOx emission. Therefore, the emission characteristics of the in-use diesel vehicles were investigated to seek ways to reduce NOx emissions in this study. The test targets were used in 237 close inspection of exhaust gases and model year varied from 1996 to 2011. However, the classification of emissions by emission standards differed considerably from NOx emissions. This means that the selection method for early retirement targets should be converted from model year to amount of emissions. If the current early retirement program was applied to the existing system, pre-Euro 3 was 22.530 g/km and Euro 4 was 21.810 g/km to NOx reduction. However, when the vehicle was changed to high emission target vehicle, NOx reduction increase maximum 84.705 kg/yr. According to the study results, an effective reduction in NOx emissions can be achieved if an earlier target in expanded to Euro 4 vehicles.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.470-478
• /
• 2015

This study was investigated the anthocyanin composition of 'Gaeryangmeoru', 'Kyoho', and 'Hongisul' grapes cultivated in Korea using ultra-performance liquid chromatography (UPLC) coupled to a mass spectrometer (MS) equipped with an ESI (electrospray ionization) source. 'Gaeryangmeoru' is a dark-blue grape used for winemaking that can reach its coloring in unfavorable weather. The 'Kyoho' and 'Hongisul' varieties are hybrid grapes that feature black and pink skin, respectively. The anthocyanins extracted from the peels of grapes were analyzed using UPLC-ESI-MS/MS. Twenty-five anthocyanins were identified in the 'Gaeryangmeoru' and 'Kyoho' varieties, and 21 were identified in the 'Hongisul' variety. Eight, 14 and five predominant anthocyanins were identified in 'Gaeryangmeoru', 'Kyoho' and 'Hongisul' grape respectively. In all three varieties, mono-glucosides were 2.3-5.9 times more abundant than di-glucoside. Malvidin was the predominant anthocyanidin in 'Gaeryangmeoru' (44.1%) and 'Kyoho' (56.5%), but cyanidin (96.8%) was in 'Hongisul'. The acylated anthocyanins in 'Gaeryangmeoru' (2.0%) were rare, whereas acylated anthocyanins with p-coumaric acid were predominant in 'Kyoho' (40.9%) and 'Hongisul' (70.7%). In particular, cyanidin feruloyl glucoside was found only in the 'Hongisul' cultivar and considered to be useful as a criterion for identification of the variety. As a result, the grape varieties were demonstrated to have variety-specific anthocyanin characteristics, enabling classification based on anthocyanin composition in terms of anthocyanidins, glucosylation and acylation. The taxonomical application of anthocyanin composition confirmed the possibility that 'Gaeryangmeoru' originated from Vitis amurensis or its hybrids, and the 'Hongisul' grape was distinguished from other grapes by cyanidin feruloyl glucoside.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1246-1246
• /
• 2001

The quality of meat is highly variable in many properties. This variability originates from both animal production and meat processing. At the pre-slaughter stage, animal factors such as breed, sex, age contribute to this variability. Environmental factors include feeding, rearing, transport and conditions just before slaughter (Hildrum et al., 1995). Meat can be presented in a variety of forms, each offering different opportunities for adulteration and contamination. This has imposed great pressure on the food manufacturing industry to guarantee the safety of meat. Tissue and muscle speciation of flesh foods, as well as speciation of animal derived by-products fed to all classes of domestic animals, are now perhaps the most important uncertainty which the food industry must resolve to allay consumer concern. Recently, there is a demand for rapid and low cost methods of direct quality measurements in both food and food ingredients (including high performance liquid chromatography (HPLC), thin layer chromatography (TLC), enzymatic and inmunological tests (e.g. ELISA test) and physical tests) to establish their authenticity and hence guarantee the quality of products manufactured for consumers (Holland et al., 1998). The use of Near Infrared Reflectance Spectroscopy (NIRS) for the rapid, precise and non-destructive analysis of a wide range of organic materials has been comprehensively documented (Osborne et at., 1993). Most of the established methods have involved the development of NIRS calibrations for the quantitative prediction of composition in meat (Ben-Gera and Norris, 1968; Lanza, 1983; Clark and Short, 1994). This was a rational strategy to pursue during the initial stages of its application, given the type of equipment available, the state of development of the emerging discipline of chemometrics and the overwhelming commercial interest in solving such problems (Downey, 1994). One of the advantages of NIRS technology is not only to assess chemical structures through the analysis of the molecular bonds in the near infrared spectrum, but also to build an optical model characteristic of the sample which behaves like the “finger print” of the sample. This opens the possibility of using spectra to determine complex attributes of organic structures, which are related to molecular chromophores, organoleptic scores and sensory characteristics (Hildrum et al., 1994, 1995; Park et al., 1998). In addition, the application of statistical packages like principal component or discriminant analysis provides the possibility to understand the optical properties of the sample and make a classification without the chemical information. The objectives of this present work were: (1) to examine two methods of sample presentation to the instrument (intact and minced) and (2) to explore the use of principal component analysis (PCA) and Soft Independent Modelling of class Analogy (SIMCA) to classify muscles by quality attributes. Seventy-eight (n: 78) beef muscles (m. longissimus dorsi) from Hereford breed of cattle were used. The samples were scanned in a NIRS monochromator instrument (NIR Systems 6500, Silver Spring, MD, USA) in reflectance mode (log 1/R). Both intact and minced presentation to the instrument were explored. Qualitative analysis of optical information through PCA and SIMCA analysis showed differences in muscles resulting from two different feeding systems.

• Journal of Environmental Health Sciences
• /
• v.38 no.2
• /
• pp.105-117
• /
• 2012

Objectives: This study aimed to assess the concentration of perfluorooctanoic acid (PFOA) and perfluorooctanesulfonate (PFOS) in blood and factors controlling their exposure among Koreans. Methods: Study subjects were selected to include 718 members of the general population residing in five metropolitan cities and the Gangwon Province area from August 2008 to January 2009. A questionnaire was administered to investigate lifestyle, socio-demographic characteristics, and other related factors. Blood samples were collected and extracted using solid-phase extraction and anion-exchange methods, and quantified by high-performance liquid chromatograph (HPLC, Agilent 1200 Series) coupled with a Triple Quad LC-MS/MS system (Agilent 6410). Results: Geometric mean concentrations of PFOA and PFOS in the blood were measured as 1.82 and 6.06 ng/ml, respectively. Mean PFOA and PFOS concentrations generally increased with age in both genders. Blood PFOA concentration was significantly different according to such variables as age, family income, residential district, and province. Blood PFOS concentration was significantly different by such variables as gender, age, lifestyle factors such as regular exercise, alcohol consumption, and smoking status. Also, family income, hazardous facilities, job classification, and province contributed significantly to differences in blood PFOS concentration levels. Conclusions: Blood PFOA and PFOS concentrations in Koreans were similar with those found in Japan, the USA, and Germany, but less than those in Australia. PFOA and PFOS exposure seems to be affected by a variety of factors in Korea. Therefore, investigation is required for each factor to assess the relative contribution of different variables.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.2
• /
• pp.59-67
• /
• 2019

Using the results from laboratory soil test, field vane test and piezocone penetration test, the engineering characteristics of the soft ground at east side of Gwangyang Port, which is located at south coast of Jeollanam-do, were investigated and optimal piezocone penetration test depth was derived to calculate piezocone factor. In this paper, the results of 61 laboratory soil tests, 226 times of field vane tests and 26 piezocone penetration tests were used. The result of laboratory soil test suggested that some physical properties such as specific gravity, moisture content, liquid limit and plastic index and others are higher than other south coast regions, meanwhile uniaxial compression strength, undrained shear strength, defined as mechanical property, appeared to be relatively small, distributed widely. According to the plastic chart, the ground was classified as high compressibility clay and low compressibility clay, mostly represent to Type 3 clay by Robertson (1990)'s classification chart. Piezocone factor was calculated by empirical method, based on the undrained shear strength which was obtained by the field vane test. According to the analysis with 3 different depth range, to set the appropriate measured depth range of piezocone penetration for comparation, using average value of the range of 5 times the vane length showed the highest correlation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.1
• /
• pp.35-52
• /
• 1973

Red Yellow Soils occur very commonly in Korea and constitute the important upland soils of the country which are either presently being cultivated or are suitable for reclaiming and cultivating. These soils are distributed on rolling, moutain foot slopes, and terraces in the southern and western parts of the central districts of Korea, and are derived from granite, granite gneiss, old alluvium and locally from limestone and shale. This report is a summary of the morphology, physical and chemical characteristics of Red Yellow Soils. The data obtained from detailed soil surveys since 1964 are summarized as follows. 1. Red-Yellows Soils have an A, Bt, C profile. The A horizon is dark colored coarse loamy or fine loamy with the thin layer of organic matter. The B horizon is dominantly strong brown, reddish brown or yellowish red, clayey or fine loamy with clay cutans on the soil peds. The C horizon varies with parent materials, and is coarser texture and has a less developed structure than the Bt horizon. Soil depth, varied with relief and parent materials, is predominantly around 100cm. 2. In the physical characteristics, the clay content of surface soil is 18 to 35 percent, and of subsoil is 30 to 90 percent nearly two times higher than the surface soil. Bulk density is 1.2 to 1.3 in the surface soil and 1.3 to 1.5 in the subsoil. The range of 3-phase is mostly narrow with 45 to 50 percent in solid phase, 30 to 45 percent in liquid one, and 5 to 25 percent in gaseous state in the surface soil; and 50 to 60 solid, 35 to 45 percent liquid and less than 15 percent gaseous in the subsoil. Available soil moisture capacity ranges from 10 to 23 percent in the surface soil, and 5 to 16 percent in the subsoil. 3. Chemically, soil reaction is neutral to alkaline in soils derived from limestone or old fluviomarine deposits, and acid to strong acid in other ones. The organic matter content of surface soil varying considerably with vegetation, erosion and cultivation, ranges from 1.0 to 5.0 percent. The cation exchange capacity is 5 to 40 me/100gr soil and closely related to the content of organic matter, clay and silt. Base saturation is low, on the whole, due to the leaching of extractable cations, but is high in soils derived from limestone with high content of lime and magnesium. 4. Most of these soils mainly contain halloysite (a part of kaolin minerals), vermiculite (weathered mica), and illite, including small amount of chlorite, gibbsite, hematite, quartz and feldspar. 5. Characteristically they are similar to Red Yellow Podzolic Soils and a part of Reddish Brown Lateritic Soils of the United States, and Red Yellow Soils of Japan. According to USDA 7th Approximation, they can be classified as Udu Its or Udalfs, and in FAO classification system to Acrisols, Luvisols, and Nitosols.