• The Pure and Applied Mathematics
• /
• v.16 no.2
• /
• pp.199-212
• /
• 2009

We investigate the multiplicity of the nontrivial periodic solutions for a class of the system of the nonlinear suspension bridge equations with Dirichlet boundary condition and periodic condition. We show that the system has at least two nontrivial periodic solutions by the abstract version of the critical point theory on the manifold with boundary. We investigate the geometry of the sublevel sets of the corresponding functional of the system and the topology of the sublevel sets. Since the functional is strongly indefinite, we use the notion of the suitable version of the Palais-Smale condition.

• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.621-633
• /
• 2015

This paper proposes the analysis and design of a DC-side symmetrical zero-current-switching (ZCS) Class-D current-source driven resonant rectifier to improve the low power-factor and high line current harmonic distortion of lighting applications. An analysis of the junction capacitance effect of Class-D ZCS rectifier diodes, which has a significant impact on line current harmonic distortion, is discussed in this paper. The design procedure is based on the principle of the symmetrical Class-D ZCS rectifier, which ensures more accurate results and provides a more systematic and feasible analysis methodology. Improvement in the power quality is achieved by using the output characteristics of the DC-side Class-D ZCS rectifier, which is inserted between the front-end bridge-rectifier and the bulk-filter capacitor. By using this symmetrical topology, the conduction angle of the bridge-rectifier diode current is increased and the low line harmonic distortion and power-factor near unity were naturally achieved. The peak and ripple values of the line current are also reduced, which allows for a reduced filter-inductor volume of the electromagnetic interference (EMI) filter. In addition, low-cost standard-recovery diodes can be employed as a bridge-rectifier. The validity of the theoretical analysis is confirmed by simulation and experimental results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.8
• /
• pp.1108-1114
• /
• 2013

This paper presents a new winding topology for MW class offshore wind generator having modular and dual 3-phase. Based on proposed simplified relationship between magnetic flux and phase current in the air gap, several new windings for modular and dual 3-phase are made. In case of one inverter operation or faulty operation, the proposed model can have balanced 3-phase induced voltage whereas the conventional generator with modular winding has unbalanced induced voltage, which can be important issue in offshore generator. The model was applied into 6MW prototype machine with dual 3-phase. Using finite element analysis, induced voltage, inductance were investigated. The results show that the proposed modular winding can be applicable to dual inverter system with electrically balanced voltage.

• Journal of applied mathematics & informatics
• /
• v.38 no.5_6
• /
• pp.533-545
• /
• 2020

We initiate and introduce the notion of binary soft mapping, which is defined on collection of binary soft sets named as binary soft class over two initial universes U₁ and U₂ with fixed set of parameters. We also define and study the properties of binary soft images and binary soft inverse images of binary soft sets. Examples and counter examples are also given in support of presented properties. Moreover, these concepts are applied to the problem of medical diagnosis in medical expert systems.

• Korea Multimedia Society
• /
• v.12 no.4
• /
• pp.28-40
• /
• 2008

Vehicular ad hoc networks (VANETs) are a practical application class of wireless ad hoc networks, which consist of moving vehicles equipped with radio communication capabilities that collaborate to form a temporary network. This paper addresses issues and protocols of multihop routing in such emerging networks in the context of safety and infotainment applications. Due to the highly dynamic mobility of vehicles, frequent link breakage and short connection time are inevitable and, thus, the routing is a challenging task and interest for many researchers and industrial community. The frequent and dynamic change of topology makes the topology-based routing unreliable but the position-based routing more effective. The position-based routing consists of the location service which maps a node id to a geo-graphical position and the forwarding scheme which selects the next hop based on geo-graphical information of the node, its neighbors and the destination. The routing techniques are further categorized into geographical forwarding, trajectory forwarding and opportunistic forwarding based on the forwarding scheme. In this paper, we first present the distinguished properties of VANETs and the challenges and intractable issues posed in designing the routing protocols, followed by the comprehensive survey of existing routing protocols. Then, the different routing protocols designed for VANETs are compared in terms of characteristics, performance and application domains.

• International Journal of CAD/CAM
• /
• v.3 no.1_2
• /
• pp.19-29
• /
• 2003

Disassembly is a fundamental process needed for component reuse and material recycling in all assembled products. Integral attachments, also known as 'snap' fits, are favored fastening means in design for assembly (DFA) methodologies, but not necessarily a favored choice for design for disassembly. In this paper, design methods of a new class of integral attachments are proposed, where the snapped joints can be disengaged by the application of localized heat sources. The design problem of reversible integral attachments is posed as the design of compliant mechanisms actuated with localized thermal expansion of materials. Topology optimization technique is utilized to obtain conceptual layout of snap-fit mechanisms that realizes a desired deformation of snapped features for joint release. Two design approaches are attempted and design results of each approach are presented, where the geometrical configuration extracted from optimal topologies are simplified to enhance the manufacturability for the conventional injection molding technologies. To maximize the magnitude of deformation, a design scheme has been proposed to include boundary conditions as design variables. Final designs are verified using commercial software for finite element analysis.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.5
• /
• pp.372-375
• /
• 2021

A three-leg inverter-type isolated DC-DC Converter that can use 220 and 440 V grid input voltages is introduced. The secondary circuit structure of the proposed topology is center-tap, which is the same as the conventional phase-shifted full-bridge converter. However, the primary circuit structure is composed of a three-leg inverter structure and a transformer, in which two primary windings are connected in series. The proposed circuit structure has a wider input voltage range than the conventional phase-shifted full-bridge converter, and the circulating-current on the primary-side is reduced. In addition, the voltage stress at the secondary rectifier is greatly improved, and high efficiency can be achieved at a high input voltage by removing the snubber circuit added to the conventional converter. Prototype converters with input DC of 311 V, output of 622 V, and 50 V and 6 kW class specifications were designed and manufactured to verify the validity of the proposed topology; the experimental results are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6B
• /
• pp.563-574
• /
• 2004

In this paper, we propose a new class of MIN(Multistage Interconnection Network) called Combine MIN which combines static network topology and apimic network topology. Combine U provides multiple paths at a hardware cost lower than that of MIN with unique path property. Combine MIN can be constructed suitable for localized communication by providing the shortcut path and multiple paths inside the processor-memory cluster which has frequent data communications. According to the results of analysis and simulation for performance evaluation, Combine MIN shows higher performance than MINs of the same network size in the highly localized communication Therefore, Combine MIN can be used as an attractive interconnection network for parallel applications with a localized communication pattern in shared-memory multiprocessor systems.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.924-930
• /
• 2014

This paper presents a $0.13{\mu}m$ CMOS 3-level envelope delta-sigma modulation (EDSM) RF signal generator, which synthesizes a 2.6 GHz-centered fully symmetrical 3-level EDSM signal for high-efficiency power amplifier architectures. It consists of an I-Q phase modulator, a Class B wideband buffer, an up-conversion mixer, a D2S, and a Class AB wideband drive amplifier. To preserve fast phase transition in the 3-state envelope level, the wideband buffer has an RLC load and the driver amplifier uses a second-order BPF as its load to provide enough bandwidth. To achieve an accurate 3-state envelope level in the up-mixer output, the LO bias level is optimized. The I-Q phase modulator adopts a modified quadrature passive mixer topology and mitigates the I-Q crosstalk problem using a 50% duty cycle in LO clocks. The fabricated chip provides an average output power of -1.5 dBm and an error vector magnitude (EVM) of 3.89% for 3GPP LTE 64 QAM input signals with a channel bandwidth of 10/20 MHz, as well as consuming 60 mW for both channels from a 1.2 V/2.5 V supply voltage.

• Spatial Information Research
• /
• v.10 no.3
• /
• pp.421-438
• /
• 2002

Abstraction of geographic data within a spatial database context must deal with geometrical simplification, modification or maintenance of the integrity of features, spatial and aspatial data, topology within class, and relationships between classes. This research is to propose a method to abstract a spatial database into a high level database. This study refines operators to carry out the modifications required by the abstraction process in the spatial database. Then, a set of operator sequences (workflows) is suggested to specify operators required to abstract a given feature class and to arrange them in order. Finally, a prototype system is developed, based on rule management with a graphic user interface. When the abstraction process is implemented sequentially we demonstrate that a preferential ordering of operations improves efficiency and reduces loss and distortion in the information.