• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.35-40
• /
• 2010

The present study proposes the strengthening method to use Conclinic Advanced FiberWrep(CAF) so as to improve Load Carrying Capacity of the RC slab bridge. In order to evaluate the strengthening performance, we strengthen 50cm per unit-width of CAF to the slab's bottom of the test bridge that designed with DB 18, then perform Static and Dynamic Field Load Test. As a result of this, 14.7% of the maximum displacement, 5.0% of the strain and 33.7% of the impact factor are reduced after strengthening. At the middle of the test spans, nominal resisting ratio is increased by 27% and Service Load Carrying Capacity is increased by 44.6%, 48.9% of each span 1 and 2. In conclusion, this study indicates that the strengthening method using CAF is very effective to improve the deteriorated RC slab bridge designed with DB 18, to the DB 24 of the first class bridge design load.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.54-66
• /
• 2006

Korea Forest Service made the landslide hazard map for all mountainous districts over the country in May 2005. In this study, we selected landslide areas occurred in Jeonbuk from 02 August 2005 to 03 August 2005 as the study area. We extracted landslide areas using images taken by PKNU 3 System, which was developed by PE&RS Laboratory in Dept. of Satellite Information Sciences, Pukyong National University and verified the accuracy of landslide hazard map by overlaying landslide hazard areas extracted by PKNU 3 images. And we analyzed characteristics of an altitude, a gradient, an inclined direction, a flow length, a flow accumulation for landslide areas using mountainous terrain analysis and Stream Network analysis of ArvView 3.3. As a result of this study, it is necessary to adjust the unitage(%) by the class and to modify and improve the score table for prediction of landslide-susceptible area forming the foundation of making the landslide hazard maps.

• Journal of Korean Library and Information Science Society
• /
• v.23
• /
• pp.1-27
• /
• 1995

The purpose of this study is twofold: to investigate into general characteristics of the networks in Korea as a new information technology and to discuss general directions of development of the use of the Internet. This study is designed to achieve the purpose by gathering and analysing data related to the use of Internet of librarians those who work in public libraries and research and development libraries and university libraries. The major conclusions made in this study is summarized as follows. (1) From this survey, received detailed response from 69 librarians, the majority (42) from research and development libraries. The majority (56) were from Library and Information Science subject area, half of them (37) hold advanced degrees. (2) Majority (40) have accessed Internet for one year or less, 9(17%) respondents for two years, 17(32%) spend every day Internet related activity. (3) 44.9% of the respondents taught themselves. 28.9% learned informally from a colleague. Formal training from a single one-hour class to more structured learning was available to 30.4%. (4) The most common reason respondents use the Internet are to access remote database searching(73.9%), to communicate with colleagues and friends and electronic mail(52.2%), to transfer files and data exchange(36.2%), to know the current research front(23.2%). They search OPACs for a variety of traditional task-related reasons(59.4%) and to see what other libraries are doing with their automated systems(31.9%). (5) Respondents for the most part use the functions : WWW (68. 1%), E-Mail(59.4%), FTP(52.2%), Gopher(34.8%), Wais(7.2%). (6) Respondents mentioned the following advantages : access to remote log-in database, an excellent and swift communications vehicle, reduced telecommunication cost, saving time. (7) Respondents mentioned the following disadvantages : low speed of communication, difficult of access to the relevant information and library materials, and shortage of database be distributed within Korea.

• Journal of Korean Society on Water Environment
• /
• v.22 no.5
• /
• pp.784-795
• /
• 2006

The purpose of this study was to assess biological river water quality by using epilithic diatoms at 40 selected sites in Geum, Youngsan, and Seomjin River systems. The sampling and analyses were performed during three seasons including January, April and June in 2005. Various water quality parameters also were analyzed. We attempted to classify the water quality condition by epilithic diatom indices (DAIpo and TDI) with the results of corresponding analyses of various chemical water quality parameters. A five class system was delivered to describe the water quality condition ranged from "very good" to "very poor." We also proposed a way of classifying water quality condition by combining two diatom indices of DAIpo and TDI. Our results showed that biomass of epilithic diatoms varied not only seasonally but spatially; it was not likely that winter diatoms represent average water quality condition, due to high concentration of nutrients. Water quality status assessed by diatom indices was generally worse than that assessed by BOD, indicating that BOD standard likely underestimates the biological condition of the water body. Importantly, nutrient-based diatom index (TDI) generally overestimated organic matter-based index (DAIpo) at most study sites, indicating that diatoms in studied rivers were likely more affected by nutrients than organic matter. Thus, management strategy to improve river water quality in Korea is suggested to emphasize more on the nutrients than organic matters.

• Journal of Korean Elementary Science Education
• /
• v.24 no.2
• /
• pp.174-182
• /
• 2005

The purpose of this study was to analyze the professionalism of elementary school teachers and to draw out factors which elementary teachers should try to improve their professionalism for environmental education. For the study, both Quantitative analysis and qualitative methodologies were applied: First, randomly selected 483 elementary teachers from Seoul and Gyeonggi self responded to 5 evaluation areas by Hungerford et al. (1994) to evaluate their environmental education professionalism through the use of five point Likert scale. Second, 2 elementary teachers' environmental classes were observed for the purpose of analyzing strengths and weaknesses in classroom instruction, and then the results of self-evaluation on environmental education professionalism and teacher professionalism as shown in the classes were compared. It was found that 483 elementary teachers including 2 teachers fer analyzing classroom instruction who performed a self-evaluation gave themselves mid-scores on the Hungerford et al.'s 5 evaluation areas. However, the result of self-evaluation did not correspond with the result of actual class observation and teacher interview. That is, the actual environmental classes conducted by 2 teachers did not seemed to reflect the evaluation areas which were the foundation of the study: the conceptual awareness, the investigation & evaluation, environmental action skills, and educational application. The results of this study can be used as the basis reference to develop teaching-learning program and in-service programs for professional development of teachers for successful application of environmental education in elementary school classes.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.305-309
• /
• 2006

This paper presents and illustrates the application of a growth and yield model that supports both forest and mill side volume and value estimates. Traditional forest stand growth and yield models represent the forest landowner view of yield and economics. Predicted yields are estimates of what one would expect from a procurement cruise, and current stumpage prices are applied to investigate optimum management strategies. Optimum management regimes and rotation ages obtained from the forest side view are unlikely to be economically optimal when viewed from the mill side. The actual distribution of recoverable manufactured product and its value are highly dependent on mill technologies and configurations. Overcoming this limitation of growth and yield computer models necessitates the ability to predict and price the expected manufactured distribution of lumber, lineal meters of veneer, and tonnes of air dried pulp fiber yield. With these embedded models, users of the yield simulator can evaluate the economics of possible/feasible management regimes from both the forest and mill business sides. The simulator is a forest side model that has been modified to produce estimates of manufactured product yields by embedding models for 1) pulpwood chip size class distribution and pulp yield for any kappa number (Schultz and Matney, 2002), 2) a lumber yield and pricing model based on the Best Opening Face model developed by the USDA Forest Service Forest Products Laboratory (Lewis, 1985a and Lewis, 1985b), and 3) a lineal meter veneer model derived from peeler block tests. While the model is strictly applicable to planted loblolly pine (Pinus taeda L.) on cutover site-prepared land in the United States (US) Gulf South, the model and computer program are adaptable to any region and forest type.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.29 no.3
• /
• pp.17-28
• /
• 2023

Purpose: This study aims to provide basic data for the future construction plans of the Infectious Disease Hospitals by analyzing the area composition and required room ratios in the wards and ICU of currently under-construction infectious disease hospitals. Methods: 3 Methods have been used in this paper. 1) This study conducted a literature review on major considerations and related guidelines for hospitals specializing in infectious diseases using existing data. 2) Based on the objects and activities of the hospital space, zones and areas were set for each department according to infection control. 3) Based on the established zones and areas, basic plan drawings of three hospitals specializing in infectious diseases currently under construction were collected and architectural drawing analysis was performed. Results: 1) Infectious Diseases Hospital must have a spatial organization that can accommodate patient isolation, infection control, efficiency of medical service, and changes. 2) Zones for infection control are divided into negative pressure and non-negative pressure zones based on airborne precaution isolation. It is divided into clean and contaminated zone according to class of cleanliness by Aseptic technique. Areas are classified by objects (patients, healthcare workers, supplies) and activities (access, medical treatment, support), and a system for organizing space is established based on this. 3) By analyzing the area composition of each departmental area, each required room, and each required space in the wards and intensive care units, it provides basic data for the spatial organization for architectural planning of the infectious disease hospital. Implication: It can be used as basic data when planning related facilities by analyzing the characteristics of the space plan of the required room according to the relationship between activities, movement lines, and operation plans based on user behavior.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.127-132
• /
• 2002

Recent deepwater offshore structures in Gulf of Mexico utilize butt welded tubular joints. Application of welded tubular joint includes tendons, production risers, and steel catenary risers. Fatigue life assessment of these joints becomes more critical because the structures to which they are attached are allowed to undergo cyclic and sometimes large displacements around an anchored position. Estimating the fatigue behavior of these tubular members in the design stage is generally conducted by using S-N curves specified in the codes and standards. Applying the stress concentration factor of the welded structure to S-N approach often results in very conservative assessment because the stress field acting on the tubular has a non-uniform distribution through the thickness. Fracture mechanics and fitness for service (FFS) technology have been applied in the design of the catenary risers. This technology enables the engineer to establish proper requirements on weld quality and inspection acceptance criteria to assure satisfactory structural integrity during its design life. It also provides guidance on proper design curves to be used and a methodology for accounting for the effects of non-uniform stress distribution through the wall thickness. An attempt was made to develop set of S-N curves based on fracture mechanics approach by considering non-uniform stress distribution and a threshold stress intensity factor. Series of S-N curves generated from this approach were compared to the existing S-N curves. For flat plate butt joint, the S-N curve generated from fracture mechanics matches with the IIW class 100 curve when initial crack depth was 0.5 mm (0.02"). Similar comparison with API X′ was made for tubular joint.. These initial crack depths are larger than the limits of inspection by current Non-destructive examination (NDE) means, such as Automatic Ultrasonic Inspection (AUT). Thus a safe approach can be taken by specifying acceptance criteria that are close to limits of sizing capability of the selected NDE method. The comparison illustrates conservatism built into the S-N design curve.

• Korean Journal of Clinical Pharmacy
• /
• v.32 no.1
• /
• pp.13-19
• /
• 2022

Background: The use of combination therapy and fixed-dose combination therapy is increasing for the treatment of type 2 diabetes. Sodium glucose cotransporter-2 inhibitor (SGLT2i) is a drug class used in combination with metformin. Methods: Type 2 diabetes patients on SGLT2i/metformin combination therapy were extracted from the 2019 Health Insurance Review & Assessment Service-National Patients Sample. On July 1, 2019, SGLT2i and metformin fixed-dose combination (SGLT2i/metformin FDC) and two-pill combination (TPC) groups were identified, and a chi-square test and multiple logistic regression were performed. Results: Of total 2,992 patients, 1,077 (36%) were prescribed SGLT2i/metformin FDC and 1,915 (64%) were prescribed TPC. We found that the most common comorbidities were in the order of dyslipidemia, gastrointestinal disease, and hypertension. Multiple logistic regression analysis showed that the use of SGLT2i/metformin FDC was lower than TPC in patients with diabetic neuropathy (OR=0.76, p=0.008). Clinic (OR=2.09, p<0.001) and general hospital (OR=1.40, p=0.019) showed higher tendency to prescribe SGLT2i/metformin FDC compared to tertiary hospital. The tendency of prescribing SGLT2i/metformin FDC was lower in Kyeonggi (OR=0.79, p=0.037), Gyeongsang (OR=0.77, p=0.025) and Chungcheong (OR=0.68, p=0.007) than Seoul. Conclusion: Factors related to the use of SGLT2i/metformin FDC in patients with type 2 diabetes were complication, medical institution and region. The tendency to prescribe SGLT2i/metformin FDC was relatively higher in clinics than in tertiary general hospitals and in Seoul than in other regions.

• Korean Journal of Ecology and Environment
• /
• v.57 no.2
• /
• pp.83-91
• /
• 2024

This study utilizes association rule learning and clustering analysis to explore the co-occurrence and relationships within ecosystems, focusing on the endangered brackish-water snail Clithon retropictum, classified as Class II endangered wildlife in Korea. The goal is to analyze co-occurrence patterns between brackish-water snails and other species to better understand their roles within the ecosystem. By examining co-occurrence patterns and relationships among species in large datasets, association rule learning aids in identifying significant relationships. Meanwhile, K-means and hierarchical clustering analyses are employed to assess ecological similarities and differences among species, facilitating their classification based on ecological characteristics. The findings reveal a significant level of relationship and co-occurrence between brackish-water snails and other species. This research underscores the importance of understanding these relationships for the conservation of endangered species like C. retropictum and for developing effective ecosystem management strategies. By emphasizing the role of a data-driven approach, this study contributes to advancing our knowledge on biodiversity conservation and ecosystem health, proposing new directions for future research in ecosystem management and conservation strategies.