• Journal of the Korean Society for Library and Information Science
• /
• v.15
• /
• pp.119-140
• /
• 1988

This paper is the study on the Medium Designator in Non-book materials. Main contents of this study were as follows; 1. The medium designator serves to indicate the class of material to which an item belongs. This is used to give an 'early warning' ;to the catalogue user. 2. This medium designator may be further divided into two elements ; a general material designation (GMD), for example video-recording, and a specific material designation (SMD), for example, videodisc. 3. GMD: In cataloging, a term indicating the broad class of material to which a bibliographic item belongs, such as 'motion picture', and SMD : In descriptive cataloging, a term indicating the special class of material (usually the class of physical object) to which a biblographic item belongs, such as videocassette. 4. Locating the medium designator after the title proper was not prescribed until ISBD(G) and AACR2. In pre-ISBD(G) codes, the ,early, warning type of medium designator was placed after all title information. But in AACR2, the medium designator is placed after the title proper, but before parellel title and other title information. 5. In Terminology, Two separate lists of designations are given in AACR2, l.1C1, one for British and one for North American use. The British list contains fewer terms, and uses generic categories to group together some of the North American list. 6. The problem of where to place the medium designator might be circumvented by using some kind of early alerting device other than a formal element of biblliographic description. Various alternatives have been suggested. A more popular device is the provision of symbols or 'media code' which are part of the call number and indicate the porticular medium type. 'Colour-coding' the use of used by some libraries but is now longly discouraged. 7. According to Frost. The medium designatorhas been generally reeognized as serving three functions; 1) as a statement of the nature or basic format of the item cataloged and thus as a meant of informing the user as to the type of material at hand; 2) as a description of the physical charaetistics of medium and as a means of alerting the user to equipment needed to make use of the item. 3) as a device to distinguish different physical formats which share the same title. 8. AACR2 raises some problems which decision makers have neet had to face preriously It provides a GMD for every item in the collection including books and it makes the application of any or all GMD's optional.

• Journal of Broadcast Engineering
• /
• v.21 no.6
• /
• pp.929-943
• /
• 2016

This paper proposes the rate control algorithm based on the S-JND (Saliency-Just Noticeable Difference) model for considering perceptual visual quality. The proposed rate control algorithm employs the S-JND model to simultaneously reflect human visual sensitivity and human visual attention for considering characteristics of human visual system. During allocating bits for CTU (Coding Tree Unit) level in a rate control, the bit allocation model calculates the S-JND threshold of each CTU in a picture. The threshold of each CTU is used for adaptively allocating a proper number of bits; thus, the proposed bit allocation model can improve perceptual visual quality. For performance evaluation of the proposed algorithm, the proposed algorithm was implemented on HM 16.9 and tested for sequences in Class B and Class C under the CTC (Common Test Condition) RA (Random Access), Low-delay B and Low-delay P case. Experimental results show that the proposed method reduces the bit-rate of 2.3%, and improves BD-PSNR of 0.07dB and bit-rate accuracy of 0.06% on average. We achieved MOS improvement of 0.03 with the proposed method, compared with the conventional method based on DSCQS (Double Stimulus Continuous Quality Scale).

• Korean Journal of Clinical Pharmacy
• /
• v.19 no.2
• /
• pp.167-179
• /
• 2009

Hypertension is one of the most common chronic diseases and it causes cardiovascular and cerebrovascular disease. While antihypertensive drug use increased, it took 15% of national health insurance drug expenditure. This study aimed to examine the pattern of antihypertensive drug prescription using National Health Insurance claims database and compare it with recommendations of Korea Hypertension Treatment Guidelines. Among the antihypertensive drugs, calcium channel blocker(64.4%) was most commonly prescribed class, and diuretics(44.6%), angiotensin II receptor blocker(33.3%), angiotensin converting enzyme inhibitor(11.7%) was followed. Approximately 81% of antihypertensives prescription were without cardiovascular or cerebrovascular disease, and among the comorbid conditions, diabetes(10.7%) was most common. calcium channel blocker(62.3%) was mostly prescribed class for hypertension with angina pectoris, angiotensin receptor blocker(45.3%) with myocardial infarction, diuretics(70.2%) and calcium channel blocker(49.5%) with congestive heart failure. For Hypertension with cerebrovascular disease, calcium channel blocker(68.0%) and angiotensin receptor blocker(43.3%) were prescribed mainly. When it comes to diabetes, calcium channel blocker(57.2%) was still mostly prescribed and angiotensin receptor blocker(45.9%) followed. But in hospitals and tertiary hospitals, angiotensin receptor blocker(65.7, 66.1%) was mostly prescribed for the patients with diabetes. For Hypertension with chronic renal disease, angiotensin receptor blocker(59.5%), calcium channel blocker(56.5%), diuretics(54.6%) were mainly used. Average number of classes per prescribing was $1.89{\pm}0.89$ class, average days per prescribing was $33{\pm}19$ day. Among the hypertension without comorbidity, 40.5% of prescription was monotherapy and 58.8% of polytherapy included diuretics. Among the outpatient prescriptions, calcium channel blocker was the most commonly used class, and the prescription pattern in clinic did not closely followed recommendations of Hypertension Treatment Guidelines.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.6
• /
• pp.780-787
• /
• 2005

Many researches and validations for the complexity metrics of the object-oriented systems have been studied. Most of them are aimed for the measurement of the partial aspects of the systems, for example, the coupling between objects, the complexity of inheritance structures, the cohesion of methods, and so on. But the software practitioners want to measure the complexity of overall system, not partial. We studied the complexity of the overall structures of object-oriented systems by analyzing the class diagram of UML. The class diagram is composed of classes and their relations. There are three kinds of relations, association, generalization, and aggregation, which are making the structure of object-oriented systems to be difficult to understand. We proposed a heuristic metric to measure the complexity of object-oriented systems by putting together the three kinds of the relations. Tn analyze the complexity of the structure of a object-oriented system for the maintainability of the system, we measured the degree of understandability of it, the reverse engineering time to draw a class diagram from the source codes, and the number of errors in the diagram. The results of this experiment shows that our proposed metric has a considerable relationship with the complexity of object-oriented systems. The metric will be helpful to the software developers for their designing tasks by evaluating the complexity of the structures of object-oriented systems and redesigning tasks , of them for the future maintainability.

• The KIPS Transactions:PartB
• /
• v.16B no.3
• /
• pp.225-232
• /
• 2009

Author name disambiguation is essential for improving performance of document indexing, retrieval, and web search. Author name disambiguation resolves the conflict when multiple authors share the same name label. This paper introduces a novel approach which exploits ontologies and WordNet-based category utility for author name disambiguation. Our method utilizes author knowledge in the form of populated ontology that uses various types of properties: titles, abstracts and co-authors of papers and authors' affiliation. Author ontology has been constructed in the artificial intelligence and semantic web areas semi-automatically using OWL API and heuristics. Author name disambiguation determines the correct author from various candidate authors in the populated author ontology. Candidate authors are evaluated using proposed WordNet-based category utility to resolve disambiguation. Category utility is a tradeoff between intra-class similarity and inter-class dissimilarity of author instances, where author instances are described in terms of attribute-value pairs. WordNet-based category utility has been proposed to exploit concept information in WordNet for semantic analysis for disambiguation. Experiments using the WordNet-based category utility increase the number of disambiguation by about 10% compared with that of category utility, and increase the overall amount of accuracy by around 98%.

• Restorative Dentistry and Endodontics
• /
• v.8 no.1
• /
• pp.89-96
• /
• 1982

The purpose of this study is to identify the phases of four different types, low-copper lathe cut (Type II, class 1) and spherical (Type II, class 2) amalgam alloys which are made by Caulk company and high copper Dispersalloy (Type II, class 3) made by Johnson & Johnson and Tytin (Type I, class 2) made by S.S. White and to determine the Vickers hardness number on the individual phase and four different types of dental amalgam. After each amalgam alloy and Hg measured exactly by the balance was triturated by the mechanical amalgamator (De Trey), the triturated mass was inserted into the cylindrical metal mold which was 4 mm in diameter and 12mm in height and was pressed by the Instron Universal Testing machine (Model 1125) at the speed of 1mm/minute with 143$kg/cm^2$ according to the A.D.A. Specification No. 1. The Specimen removed from the mold, mounted and stored in the room temperature for 7 days. The speciman was polished with the emery paper from #220 to #1200 and finally on the polishing cloth with 0.3 and 0.05 um $Al_2O_3$ powder suspended in water. And then each specimen was etched by Allan's method and washed with Sodium Bisulfinite for 30 seconds. Finally differentiation and metallography on each phase were obtained by using metallographical microscope (Versamet, Union) and microhardness was obtained by using microhardness tester (MVH-2, Torsee). The results were as follows: 1. In the low-copper amalgam, the ${\gamma}$, ${\gamma}_1$ and ${\gamma}_2$ phase were observed and in the high-copper amalgam, the ${\gamma}$, ${\gamma}_1$. ${\epsilon}$ and ${\eta}$ phases were observed but ${\gamma}_2$ phase was not observed. 2. Among the microhardness of each amalgam phase measured under pressing a vickers diamond indenter with 2.0gm load for 30 seconds, e phase has the highest V.H.N (314 ${\pm}$ 20), and in low-copper amalgam 12 phase has the lowest V.H.N. (29${\pm}$1) and ${\eta}$ phase which was observed in high-copper amalgam has 230${\pm}$13 V.H.N and this phase is considerd to contribute to strengthen the handness in amalgam. 3. The V.H.N. measured under pressing a Vickers diamond indenter with 300.0gm load for 30 seconds in low-copper amalgam was lower than that of high-copper amalgam.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.3
• /
• pp.554-561
• /
• 2017

IoT (Internet of Things) devices are often located in environments where indoor or underground, signals are difficult to reach. In addition, the transmission power is low, the base station should be designed to be able to receive signals even at low reception sensitivity. For this reason, a device having a poor channel condition can be transmitted at a low data rate using a low coding rate or repetition. When the coverage class is divided according to the channel condition and the data rate, the packet length may vary from one coverage class to another, and the performance of the slotted aloha random access may be degraded. We will focus on two methods of using shared-resource and seperate resources among multiple slotted aloha methods. In particular, when devices with different coverage classes use shared resources, performance of a device with a bad channel condition may deteriorate. Conversely, when using separate resources for each coverage class, there is a problem that congestion may occur which increases the number of devices that perform random access to one resource area. In this paper, we propose some methods to overcome this problem. This study is mainly focused on MTC devices, and is considered to be a high possibility of future development.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.1
• /
• pp.30-38
• /
• 2006

Objectives: We examined whether the neighborhood socioeconomic position predicts the smoking rates after adjusting for individual socioeconomic position indicators. Methods: Data were obtained from the 2001 Seoul Health Indicators Survey. The neighborhood socioeconomic position was the residential distribution of the high class (power elites), as measured by the location quotients (LQ) for each administrative dong (district). A high LQ denotes a high neighborhood socioeconomic status. The individual socioeconomic position included education, occupation and income. Age-adjusted smoking rates according to the LQ level were computed with the direct method. The total number of subjects in this study (26,022 men and 28,007 women) was the reference. A multilevel logistic regression analysis was conducted with the individuals at the first level and the neighborhoods at the second level to estimate the odds ratios of smoking with 95% confidence intervals. Results: For men, the age-adjusted smoking rates increased with a decrease in the LQ. For women, the relationship between the age-adjusted smoking rate and the LQ was not clear. The odds of smoking for both genders were greater among those subjects with lower incomes and lower education. The manual occupational class had greater odds of smoking than the non-manual class for the males, while the odds ratio of smoking among females with a manual occupation tended to be lower than those females with a non-manual occupation. For the males, the LQ levels independently predicted smoking after adjustment for individual income. However, this relation between the LQ and smoking in males was explained by full adjustment for the individual socioeconomic position indicators (education, occupation and income). Conclusions: A low level of neighborhood socioeconomic position was associated with higher smoking rates among the men residing in Seoul. This association between the neighborhood socioeconomic position and smoking in men was explained by the individual socioeconomic position. Anti-smoking efforts to reduce geographical inequality in smoking should be directed at reducing the smoking rates between the individuals with different socioeconomic backgrounds in the metropolitan city of Seoul, South Korea.

• Journal of Climate Change Research
• /
• v.6 no.4
• /
• pp.357-366
• /
• 2015

This study was conducted to estimate carbon stocks of Quercus serrata with drawing volume of trees in each tree height and DBH applying the suitable stem taper equation and tree specific carbon emission factors, using collected growth data from all over the country. Information on distribution area, tree number per hectare, tree volume and volume stocks were obtained from the $5^{th}$ National Forest Inventory (2006~2010), and method provided in IPCC GPG was applied to estimate carbon storage and removals. Performance in predicting stem diameter at a specific point along a stem in Quercus serrata by applying Kozak's model,$d=a_1DBH^{a_2}a_3^{DBH}X^{b_1Z^2+b_2ln(Z+0.001)+b_3{\sqrt{Z}}+b_4e^Z+b_5({\frac{DBH}{H}})}$, which is well known equation in stem taper estimation, was evaluated with validations statistics, Fitness Index, Bias and Standard Error of Bias. Consequently, Kozak's model turned out to be suitable in all validations statistics. Stem volume tables of Quercus serrata were derived by applying Kozak's model and carbon stock tables in each tree height and DBH were developed with country-specific carbon emission factors ($WD=0.65t/m^3$, BEF=1.55, R=0.43) of Quercus serrata. As a result of carbon stock analysis by age class in Quercus serrata, carbon stocks of IV age class (11,358 ha, 36.5%) and V age class (10,432; 33.5%) which take up the largest area in distribution of age class were 957,000 tC and 1,312,000 tC. Total carbon stocks of Quercus serrata were 3,191,000 tC which is 3% compared with total percentage of broad-leaved forest and carbon sequestration per hectare(ha) was 3.8 tC/ha/yr, $13.9tCO_2/ha/yr$, respectively.

• The Journal of Korean Society for School & Community Health Education
• /
• v.4
• /
• pp.61-78
• /
• 2003

This research was conducted to identify the factors that cause school related stress among middle school students, and to develop countermeasures in order to prevent the rebellious acts of middle school students that are on the rise and to pursue after effective guidance measures. To achieve these research objectives, 856 questionnaires were distributed to the two middle schools, situated in Goyang-si, Gyeonggi Province, and these questionnaires were analyzed, using the SPSS statistical package program. The conclusions were as follows; 1. Perceived factors for School Related Stress Overall average of the perceived degree school related stress factors was a level that goes beyond the normalcy. Stress on the grade was the highest Among these, the average of question items that addressed decrease in grade was the highest of all items followed by class factors, teacher-related factors, friend-related factors, and environmental factors. Accordingly, this research demonstrated that the students feel pressured by the university entrace examination and a school life that is focused on grades. The teacher-related factors and class factors were higher than the average, and others were relatively low. 2. School Related Stress according by Individual All the factors for school related stress were statistically significant difference according to the gender, and teacher-related factors, class factors, and environmental factors were statistically significant difference according to their school years. Their grade made their grade factors statistically significant difference, and the number of friends produced a statistically significant difference result on the teacher-related factors. Wheather they had extra classes or not made a statistically significant difference result on the class factors and environmental factors, and especially the time of doing physical exercises produced statistically significant difference on the environmental factors. 3. Countermeasures for School Related Stress according by Individual As for the countermeasures for school related stress according to the individuality, the active reacting was statistically significant difference according to the gender index, and the student's degree to react passively was statistically significant difference according to their grade. The students in different school years showed statistically significant difference reactions in both passive ways and active ways. students tended to react differently in an unreality index. Lastly, Wheather they had extra classes and physical exercises made then to react passively or actively. When the results are compiled, students are most affected by the stress related to grades, which reflected the university entrance examination oriented school life. An alternative is that the development of educational program that factors in the students' talents and aptitude is needed urgently. Moreover, character and career path related guidance and education are just as important as the academics. Given that the stress factors exert some degree of influence on the countermeasures, it is necessary to block the factors in advance and for all the teachers and parents to make an effort to react actively.