• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.502-514
• /
• 2002

The aim of this study was to evaluate the marginal adaptation of direct class II sandwich restoration with packable composites(P-60), resin modified glass ionomer cement(Fuji-II LC), flowable compomer(Dyract Flow), flowable composites(Filtek Flow) in comparison with total bond restorations. In addition, for sandwich restorations, influence of different sandwich techniques was also evaluated. Large butt-joint box typed class II cavites with cervical margins 1mm below the cemento-enamel junction were cut into 70 extracted human molars. The cavities(7 groups, n=10) were filled using a closed/open sandwich restoration or total bond restoration technique with materials according to the manufacturer's recommandation using the single-component bonding agent for each system. Teeth were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 30-second dwell time. The teeth were then coated with nail polish 1mm short of the restoration, placed in a 2% methylene blue for 24 hours, and sectioned with diamond wheel. Sections were examined with a stereoscope to determine the extent of microleakage. Dentine /Cementum margins were analyzed for microleakage on scale of 0(no leakage) to 4(entire axial wall) and interface between materials, on scale of 0(no leakage) to 3(axial wall). Results were evaluated with Kruskal Wallis Test, corrected for ties, to determine whether there were statistically significant differences among the seven groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Dunn s Method. The results were as follows : 1. All groups showed some micoleakage in cervical portion. But there were no microleakage in interface between materials. 2. Closed sandwich restorations with Fuji-II LC and Filtek Flow had significantly lower leakage rating than total restorations with only P-60. However, open sandwich restorations with Dyract Flow showed significantly higher (P<0.05) 3. Closed sandwich restorations had significantly lower leakage rating than total restorations. However open sandwich restoration s showed significantly higher (P<0.05). 4. Sandwich restorations with Fuji-II LC were iou$.$or leakage than only P-60. Filtek Flow, Dyract Flow. But there were no statistically differences among the materials. From the results above, it could be concluded, closed sandwich restorations was effective in reducing microleakage of class II restorations. The best results showing the least microleakage were for the closed sandwich technique with Fuji-II LC and Filtek Flow.

• Journal of Korean Society of Forest Science
• /
• v.110 no.1
• /
• pp.64-71
• /
• 2021

Recently, climate change has gradually accelerated the occurrence of landslides. Among the various effects caused by landslides,debris flow is recognized as particularly threatening because of its high speed and propagating distance. In this study, the impacts of various factors were analyzed using quantification theory(I) for the prediction of debris flow hazard soil volume in Seoraksan National Park, Korea. According to the range using the stepwise regression analysis, the order of impact factors was as follows: vertical slope (0.9676), cross slope (0.6876), altitude (0.2356), slope gradient (0.1590), and aspect (0.1364). The extent of the normalized score using the five-factor categories was 0 to 2.1864, with the median score being 1.0932. The prediction criteria for debris flow occurrence based on the normalized score were divided into four grades: class I, >1.6399; class II, 1.0932-1.6398; class III, 0.5466-1.0931; and class IV, <0.5465. Predictions of debris flow occurrence appeared to be relatively accurate (86.3%) for classes I and II. Therefore, the prediction criteria for debris flow will be useful for judging the dangerousness of slopes.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.2
• /
• pp.5-11
• /
• 2014

Small hydro power, among other renewable energy resources, has been evaluated to have enough development value because it is a clean, renewable and abundant energy resource. In addition, small hydro power has the advantage of low cost development by using existing facilities like sewage treatment plants, water works and similar resources. But in the case of small hydro power systems, there are problems with degraded operation efficiency of turbine due to changes in flow rates. In order to overcome this, variable speed control can be achieved by using the power rectifier and permanent magnetic synchronous generator(PMSG) as a possible method to respond to the changes in flow rates. In this study, a commercial ANSYS CFD code was used to analyze the performance of 10kW class propeller hydro turbine and to also investigate flow characteristics at variable flow rates and runner vane.

• Journal of The Korean Association of Information Education
• /
• v.25 no.3
• /
• pp.557-569
• /
• 2021

In preparation for the future society, the educational curriculum is changing according to the trend of the times, and with the advent of the era of the 4th Industrial Revolution, the purpose of the new 2015 revised curriculum was suggested to foster the convergence creativity of students. The purpose of software education is to promote creativity and further develop problem-solving skills in connection with real life. In addition, flow in learning leads to outstanding educational achievement. However, in elementary school computer education, there is still a lack of development of a convergence class model for students to easily immerse themselves and promote creative problem-solving skills. Therefore, in this study, we designed convergence computer education using Novel Engineering, which is a convergence class model suitable for these educational conditions and applied it to classes. Further, to measure the effect on the improvement of learning flow and creative problem-solving ability. the Novel Engineering-based computer class was applied to the experimental group for 6th graders, and the general computer class was applied to the control group. As a result of the pre-post test between groups, it was found that computer classes using Novel Engineering had a positive effect on learning flow and creative problem-solving ability.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.216-227
• /
• 2004

A new cavitating model by using bubble size distribution based on bubbles-mass has been proposed. Both liquid and vapor phases are treated with Eulerian framework as a mixture containing minute cavitating bubbles. In addition vapor phase consists of various sizes of vapor bubbles, which are distributed to classes based on their mass. The bubble number-density for each class was solved by considering the change of the bubble-mass due to phase change as well as generation of new bubbles due to heterogeneous nucleation. In this method, the bubble-mass is treated as an independent variable, and the other dependent variables are solved in spatial coordinates and bubble-mass coordinate. Firstly, we employed this method to calculate bubble nucleation and growth in stationary super-heated liquid nitrogen, and bubble collapse in stationary sub-cooled one. In the case of bubble growth in super-heated liquid, bubble number-density of the smallest class based on its mass is increased due to the nucleation. These new bubbles grow with time, and the bubbles shift to larger class. Therefore void fraction of each class is increased due to the growth in the whole class. On the other hand, in the case of bubble collapse in sub-cooled liquid, the existing bubbles are contracted, and then they shift to smaller class. It finally becomes extinct at the smallest one. Secondly, the present method is applied to a cavitating flow around NACA00l5 foil. Liquid nitrogen and liquid oxygen are employed as working fluids. Cavitation number, $\sigma$, is fixed at 0.15, inlet velocities are changed at 5, 10, 20 and 50m/s. Inlet temperatures are 90K in case of liquid nitrogen, and 90K and 1l0K in case of liquid oxygen. 110K of oxygen is corresponding to the 90K of nitrogen because of the same relative temperature to the critical one, $T_{r}$=$T/T_c^{+}$. Cavitating flow around the NACA0015 foils was properly analyzed by using bubble size distribution. Finally, the method is applied to a cavitating flow in an inducer of the LE-7A hydrogen turbo-pump. This inducer has 3 spiral foils. However, for simplicity, 2D calculation was carried out in an unrolled channel at 0.9R cross-section. The channel moves against the fluid at a peripheral velocity corresponding to the inducer revolutions. Total inlet pressure, $Pt_{in}$, is set at l00KPa, because cavitation is not generated at a design point, $Pt_{in}$=260KPa. The bubbles occur upstream of the foils and collapse between them. Cavitating flow in the inducer was successfully predicted by using the bubble size distribution.

• Journal of Digital Convergence
• /
• v.18 no.2
• /
• pp.455-462
• /
• 2020

The purpose of this study was to investigate the effect of behavior type of dance art instructors in elementary dance education on class satisfaction focused on mediations of flow and perceived competence between commanding and positive reward types. A total of 453 questionnaires were analyzed for this study. For the analysis of the data, SPSS 18.0 version was used and double mediation model operating in serial, proposed by Hayes and a bootstrapping method were used. First, instructor's commanding type and positive reward type were statistically positive effect on class satisfaction. Second, the indirect effect of instructor's commanding type, and positive reward type on class satisfaction through the flow was statistically positive significant. Third, the indirect effect of instructor's commanding type, and reward type on class satisfaction through the perceived competence was statistically not significant. Lastly, the indirect effect of instructor's commanding type, and positive reward type on class satisfaction through the flow and perceived competence was statistically positive significant.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.6
• /
• pp.272-280
• /
• 2021

The influence of acetylene flow rates on the carburizing behavior of an AISI 4115 steel in 1 ton-class mass production-type vacuum carburizing furnace has been studied through microstructure, carbon concentration, hardness analyses. The AISI 4115 steels were carburized with various flow rates (20, 32.7, 60 l/min) and locations in the furnace (top, center, bottom) at 950℃. The acetylene flow rate played an important role in controlling the carburizing properties of carburized samples, such as effective case depth and uniformity carburizing according to location in the furnace. At an acetylene flow rate of 20 l/min, the carburized samples had a shallow average hardened layer (0.645 mm) compared to the target hardening depth (1 mm) due to low carbon flux and spatial uniformity of carburization (17.8%) in the furnace. At a flow rate of 60 l/min, the carburized samples showed an average hardened layer (1.449 mm) deeper than the target hardening depth and had the spatial uniformity of carburization (98.8%). In particular, at a flow rate of 32.7 l/min, the carburized samples had an average hardened layer (1.13 mm) close to the target hardening depth and had the highest carburizing uniformity (99.1%). As a result, an appropriate flow rate of 32.7 l/min was derived to satisfy the target hardening depth and to have spatial uniform hardened layer in the furnace.

• Journal of Korea Multimedia Society
• /
• v.7 no.5
• /
• pp.698-712
• /
• 2004

DiffServ network architecture does not define a call admission control procedure explicitly. In this paper, a new DiffServ QoS control mechanism is suggested which, after the call admission control, can execute packet process according to the class while, at the same time, executing on the flow based call admission control in the DiffServ network. Routers on the path from the source to the destination estimate the aggregated class traffic of the existing flows and the new incoming flow and then, perform a call admission control in accordance with the type of classes efficiently based on the required bandwidth per each class that can meet the user's QoS requirements. In order to facilitate the packet process according to the class after the flow based call admission control, a mechanism is suggested that can adjust the network resources to classes dynamically. The performance analysis on this mechanism is carried out through a simulation.

• Journal of Korean Society of Transportation
• /
• v.21 no.6
• /
• pp.77-88
• /
• 2003

This paper proposes a solution algorithm for solving a multi-class analytical DTA model. In the DTA model, three traveler classes are classified according to different assumptions of traveler's route choice behavior: including fixed route, Stochastic Dynamic User Optimum(SDUO), and Dynamic User Optimum(DUO). To solve this DTA model, variables of link flow and exit flow are represented solely by inflow. The resulting Linear Program(LP) subproblem in the inner iteration is solved as a typical time-dependent shortest route problem over a physical network. Accordingly, the required time-space network expansion in solving DTA models is no longer needed.

• Korean Journal of Veterinary Research
• /
• v.50 no.3
• /
• pp.179-185
• /
• 2010

The present study was undertaken to establish reference values for the composition blood lymphocyte populations and compare forty three Hanwoo neonatal calves (KC) with twenty one Holstein calves (HC) by blood cell count and immunophynotying. The percentages of CD2+, CD4+, CD8+, CD26+, ACT2+, MHC class, MHC class II and WC1+ T cells, B cells were determined by flow cytometry. The number of lymphocyte and monocyte in HC were higher than those of KC. However, the number of neutrophils was higher in HC than KC. The proportions of CD2+, CD4+, CD8+, MHC class, and WC1+ lymphocytes remained relatively stable during the study period, while there was a moderate increase in the relative percentage of CD26+, ACT2+, MHC class II and B cell from birth to approximately 3 weeks of age. Marked differences in the relative proportions of the lymphocyte subpopulations were noted between the individual calves. The present study shows that the T-cell subpopulations are present in peripheral blood of KC at levels comparable with HC, while the MHC class II and B cell population of KC increases significantly with age. The absolute number of WBC in KC was due to the decrease of absolute number of neutrophil rather than the increase of lymphocyte. The results indicated that KC have significantly higher number of neutrophils, and proportion of MHC class II and B cell than HC.