• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.246-257
• /
• 2008

The purpose of this study was to investigate the influence of various occlusal loading sites and directions on the stress distribution of the cervical composite resin restorations of maxillary second premolar, using 3 dimensional (3D) finite element (FE) analysis. Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). HyperMesh (Altair Engineering, Inc., Troy, USA) and ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid (Z100, 3M Dental Products, St. Paul, MN, USA) or flowable resin (Tetric Flow, Vivadent Ets., FL-9494-Schaan, Liechtenstein) and each restoration was simulated with adhesive layer thickness ($40{\mu}m$). A static load of 200 N was applied on the three points of the buccal incline of the palatal cusp and oriented in $20^{\circ}$ increments, from vertical (long axis of the tooth) to oblique $40^{\circ}$ direction towards the buccal. The maximum principal stresses in the occlusal and cervical cavosurface margin and vertical section of buccal surfaces of notch-shaped class V cavity were analyzed using ANSYS. As the angle of loading direction increased, tensile stress increased. Loading site had little effect on it. Under same loading condition, Tetric Flow showed relatively lower stress than Z100 overall, except both point angles. Loading direction and the elastic modulus of restorative material seem to be important factor on the cervical restoration.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.479-487
• /
• 2023

Recently, the destructive power of typhoons is continuously increasing owing to global warming. In a situation where the installation of floating wind turbines is increasing worldwide, concerns about the huge loss and collapse of floating offshore wind turbines owing to strong typhoons are deepening. A new type of disconnectable mooring system must be developed for the safe operation of floating offshore wind turbines. A new submersible mooring pulley considered in this study is devised to more easily attach or detach the floating of shore wind turbine with mooring lines compared with other disconnectable mooring apparatuses. To investigate the structural safety of the initial design of submersible mooring pulley that can be applied to an 8MW-class floating type offshore wind turbine, scale-down structural models were developed using a 3-D printer and structural tests were performed on the models. For the structural tests of the scale-down models, tensile specimens of acrylonitrile butadiene styrene material that was used in the 3-D printing were prepared, and the material properties were evaluated by conducting the tensile tests. The finite element analysis (FEA) of submersible mooring pulley was performed by applying the material properties obtained from the tensile tests and the same load and boundary conditions as in the scale-down model structural tests. Through the FEA, the structural weak parts on the submersible mooring pulley were reviewed. The structural model tests were conducted considering the main load conditions of submersible mooring pulley, and the FEA and test results were compared for the locations that exceeded the maximum tensile stress of the material. The results of the FEA and structural model tests indicated that the connection structure of the body and the wheel was weak in operating conditions and that of the body and the chain stopper was weak in mooring conditions. The results of this study enabled to experimentally verify the structural safety of the initial design of submersible mooring pulley. The study results can be usefully used to improve the structural strength of submersible mooring pulley in a detailed design stage.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1069-1077
• /
• 2011

In this paper, a design and fabrication of a miniaturized 2.5 GHz 8 W power amplifier using selectively anodized aluminum oxide(SAAO) substrate are presented. The process of SAAO substrate is recently proposed and patented by Wavenics Inc. which uses aluminum as wafer. The selected active device is a commercially available GaN HEMT chip of TriQuint company, which is recently released. The optimum impedances for power amplifier design were extracted using the custom tuning jig composed of tunable passive components. The class-F power amplifier are designed based on EM co-simulation of impedance matching circuit. The matching circuit is realized in SAAO substrate. For integration and matching in the small package module, spiral inductors and single layer capacitors are used. The fabricated power amplifier with $4.4{\times}4.4\;mm^2$ shows the efficiency above 40 % and harmonic suppression above 30 dBc for the second(2nd) and the third(3rd) harmonic at the output power of 8 W.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.6
• /
• pp.11-25
• /
• 2009

A method of instrumentally estimating the seismic intensity (MMI) based on Fourier Acceleration Spectrum, which is the so-called 'FAS MMI method' of Sokolov and Wald (2002), was considered for its applicability to Korea. In order to implement the FAS MMI method, the empirical models of mean (m) and standard deviation (${\sigma}$) for Korea were derived for MMI ${\leq}$ IV according to individual seismic intensity by using the site-consistent horizontal FAS of 580 records from 65 isoseismal maps prepared based on the reported MMI of Korea Meteorological Administration. The site-consistent FAS at a site were obtained by correcting the observed FAS for the difference of the site amplification function relative to that of the target site of Class D station (Yun and Suh, 2007) which was evaluated to be a representative site for the generic soil profile of Korea. The FAS m model for MMI ${\leq}$ IV follows the overall linear relation in log space according to seismic intensities, featuring the FAS mean model for MMI = IV similar to that of the global model of Sokolov and Wald (2002). The ${\sigma}$-values of the FAS model are found to be greater than those of the global model for MMI ${\geq}$ V, while significantly lower than those of the global model for MMI = IV.

• Korean Journal of Childcare and Education
• /
• v.6 no.2
• /
• pp.57-81
• /
• 2010

The purpose of this study is to examine the balanced English approach program on five-year-old children's English reading and writing ability. For this study, two classes consisting of five-year-old children in HATBEAT kindergarten in D city were selected. One class was designated as the experimental group and the other as the control group. The balanced English approach program was performed on the experimental group but not on the control group. The balanced English approach program was carried out for 8 weeks. The experimental procedures were in the order of pre-test, the experimental treatment, and post-test. The result of the experiment was evaluated by comparing the pre-test and post-test results. Analysis of data was performed by ANCOVA. The result of the study are as follows. First, in the English reading ability, the experimental group was more enhanced than the control group. Also, for sub-factors of English reading such as alphabet and English word reading ability, the experimental group was more enhanced than the control group. However, in the English book reading ability as a sub- factor of the English reading, there was not much difference in the result between the experimental group and the control group. Second, in the English writing ability, the experimental group were more enhanced than the control group.

• Radiation Oncology Journal
• /
• v.33 no.4
• /
• pp.276-283
• /
• 2015

Purpose: We evaluated the efficacy and toxicity of repeated high dose 3-dimensional conformal radiation therapy (3D-CRT) for patients with unresectable hepatocellular carcinoma. Materials and Methods: Between 1998 and 2011, 45 patients received hepatic re-irradiation with high dose 3D-CRT in Samsung Medical Center. After excluding two ineligible patients, 43 patients were retrospectively reviewed. RT was delivered with palliative or salvage intent, and equivalent dose of 2 Gy fractions for ${\alpha}/{\beta}=10Gy$ ranged from $31.25Gy_{10}$ to $93.75Gy_{10}$ (median, $44Gy_{10}$). Tumor response and toxicity were evaluated based on the modified Response Evaluation Criteria in Solid Tumors criteria and the Common Terminology Criteria for Adverse Events (CTCAE) ver. 4.0. Results: The median follow-up duration was 11.2 months (range, 4.1 to 58.3 months). An objective tumor response rate was 62.8%. The tumor response rates were 81.0% and 45.5% in patients receiving ${\geq}45Gy_{10}$ and $<45Gy_{10}$, respectively (p = 0.016). The median overall survival (OS) of all patients was 11.2 months. The OS was significantly affected by the Child-Pugh class as 14.2 months vs. 6.1 months (Child-Pugh A vs. B, p < 0.001), and modified Union for International Cancer Control (UICC) T stage as 15.6 months vs. 8.3 months (T1-3 vs. T4, p = 0.004), respectively. Grade III toxicities were developed in two patients, both of whom received ${\geq}50Gy_{10}$. Conclusion: Hepatic re-irradiation may be an effective and tolerable treatment for patients who are not eligible for further local treatment modalities, especially in patients with Child-Pugh A and T1-3.

• The korean journal of orthodontics
• /
• v.29 no.6 s.77
• /
• pp.663-672
• /
• 1999

A case is described, where an adolescent boy developed alopecia areata and alopecia totalis during the course of routine orthodontic treatment for the resolution of a dentoalveolar Class II division 1 malocclusion. The orthodontic treatment lasted 22 months, with a successful outcome. However, within eight months of the onset of treatment the patient lost all his hair Exhaustive medical tests and differential diagnosis determined that the etiolgy of the patient's alopecia was psychological stress evoked by the orthodontic treatment. Numerous reports suggest that psychological stress can cause alopecia by affecting the immune system. Therefore, it appears reasonable to assume that in the case of this patient, alopecia had resulted from stress effects on the immune system, leading to autoimmune disease-like conditions in tissues surrounding the scalp hair follicles. The alopecia condition was successfully reversed by daily oral and topical applications of vitamin D. It is concluded that the immune system plays a pivotal role in tissue remodeling around the teeth and elsewhere in the body, and that any conditions capable of affecting this system may cause unfavorable outcomes, such as alopecia.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.290-290
• /
• 1994

The binding characteristic of oxomemazine to muscarinic receptor in the cerebrum, heart, and ileum were compared to those of pirenzepine to investigate whether oxomemazine could classify the muscarinic receptor subtypes. 〔$^3$H〕Quinucl idinyl benzilate(QNB) identified a single class of muscarinic receptors with apparent K$\sub$D/ value of about 60 pM in three tissues. Analysis of the pirenzepine inhibition curve of 〔$^3$H〕QNB binding to cerebral microsome indicated the presence of two receptor subtypes with high (Ki=16 nM, M$_1$-receptor) and low (Ki=400 nM, M$_2$-receptor) affinity for pirenzepine. Oxomemazine also identified two receptor subtypes with high (Ki=84 nM, On-receptor) and low (Ki=1 4 ${\mu}$M, O$\sub$L/-receptor) affinity in rat cerebral microsome, The percentage population of the M$_1$-and M$_2$-receptors to the total receptors were 61 : 39, and those of the O$\^$H/- and O$\sub$L/-receptors 39 : 61, respectively, However, the Hill coefficients of these two drugs for the inhibition of 〔$^3$H〕QNB binding to the heart and ileum were close to unity which indicated that these drugs bound to a uniform population of receptors in these two tissues. The Ki values for the low affinity sites of pirenzepine and oxomemazine in the cerebrum were similar to those of these drugs in the heart ileum. Both pirenzepine and oxomemazine increased K$\sub$D/ value for 〔$^3$H〕QNB without affecting the binding sites concentration and Hill coefficient for the 〔$^3$H〕QNB binding. Oxomemazine had a 10-fold lower affinity at Ma-receptors than at M$_1$-receptors, and pirenzepine a 8-fold lower affinity at O$\sub$L/-receptors than OH-receptors. Analysis of the shal low competition curves of oxomemazine for the H$_1$ receptors and pirenzepine for the O$\sub$L/-receptors yielded that 69% of the M$_1$-receptors were of the O$\sub$H/-receptors and the remaining 31% of the O$\sub$L/-receptors, and that 29% of the O$\sub$L/-receptors were of the M$_1$-receptors and 71% of the M$_2$-receptors. However, M$_2$ for oxomemazine and O$\sub$H/ for pirenzepine were composed of a uniform population. These results suggest that oxomemazine could discriminatethe muscarnic receptor subtypes and may subclassify the M$_1$-receptors into two subtypes.

• Journal of KIISE:Software and Applications
• /
• v.36 no.11
• /
• pp.936-946
• /
• 2009

A graph cuts method has recently attracted a lot of attentions for image segmentation, as it can globally minimize energy functions composed of data term that reflects how each pixel fits into prior information for each class and smoothness term that penalizes discontinuities between neighboring pixels. In previous approaches to graph cuts-based automatic image segmentation, GMM(Gaussian mixture models) is generally used, and means and covariance matrixes calculated by EM algorithm were used as prior information for each cluster. However, it is practicable only for clusters with a hyper-spherical or hyper-ellipsoidal shape, as the cluster was represented based on the covariance matrix centered on the mean. For arbitrary-shaped clusters, this paper proposes graph cuts-based image segmentation using mean shift analysis. As a prior information to estimate the data term, we use the set of mean trajectories toward each mode from initial means randomly selected in $L^*u^*{\upsilon}^*$ color space. Since the mean shift procedure requires many computational times, we transform features in continuous feature space into 3D discrete grid, and use 3D kernel based on the first moment in the grid, which are needed to move the means to modes. In the experiments, we investigate the problems of mean shift-based and normalized cuts-based image segmentation methods that are recently popular methods, and the proposed method showed better performance than previous two methods and graph cuts-based automatic image segmentation using GMM on Berkeley segmentation dataset.

• Biomolecules & Therapeutics
• /
• v.25 no.5
• /
• pp.511-518
• /
• 2017

Ultraviolet (UV) irradiation is a relevant environment factor to induce cellular senescence and photoaging. Both autophagy- and silent information regulator T1 (SIRT1)-dependent pathways are critical cellular processes of not only maintaining normal cellular functions, but also protecting cellular senescence in skin exposed to UV irradiation. In the present studies, we investigated whether modulation of autophagy induction using a novel synthetic SIRT1 activator, heptasodium hexacarboxymethyl dipeptide-12 (named as Aquatide), suppresses the UVB irradiation-induced skin aging. Treatment with Aquatide directly activates SIRT1 and stimulates autophagy induction in cultured human dermal fibroblasts. Next, we found that Aquatide-mediated activation of SIRT1 increases autophagy induction via deacetylation of forkhead box class O (FOXO) 1. Finally, UVB irradiation-induced cellular senescence measured by $SA-{\beta}-gal$ staining was significantly decreased in cells treated with Aquatide in parallel to occurring SIRT1 activation-dependent autophagy. Together, Aquatide modulates autophagy through SIRT1 activation, contributing to suppression of skin aging caused by UV irradiation.