• 폴리머
• /
• 제39권1호
• /
• pp.122-129
• /
• 2015

최근 해양 산업에서는 해양환경에 잔류성은 없으면서 방오성능은 우수한 새로운 종류의 방오도료 수지 개발이 해결해야 할 시급한 과제로 대두되고 있다. 본 연구에서는 폴리우레탄계 수지를 방오도료용 수지로 적용하여 평가하였다. Polyethylene glycol(PEG), 4,4'-diphenylmethane diisocyanate(MDI) 2,2'-bis(hydroxyl methyl)propionic acid(DMPA)를 사용하여 중합한 후 방오성능을 발휘하는 치환기로서 quaternary ammonium salt를 치환시켰다. 합성된 수지는 최종적으로 필름화하여 해수 내에서의 마모특성을 확인하였다. 그 결과, PEG의 분자량이 600인 방오도료용 폴리우레탄 수지의 기계적 물성이 가장 양호함을 알 수 있었으며, quaternary ammonium salt의 함량이 일정 이상으로 많은 경우에는 수지에 대한 부착력이 저하됨을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제27권3호
• /
• pp.249-256
• /
• 2002

The use of flowable composite resins as liners in class II packable composite restoration has been suggested by some manufacturers. However, the contributions of this technique are unproven. The purpose of this study was to compare the gingival microleakage in class II packable composite restorations with or without the use of flowable composite resins as liners. Slot cavities were prepared on both proximals of 80 extracted human molars and randomly assigned to 8 groups of 20 each. The gingival margins were located at 1mm above CEJ in 80 cavities (group1-4) and 1mm below CEJ in 80 cavities (group5-8). The prepared teeth were mounted in the customized tray with adjacent teeth to simulate clinical conditions and metallic matrix band (Sectional matrix) and wooden wedges were applied. After acid etching and application of Single Bond, each group was restored with the following materials using incremental placement technique: Group 1,5 (Filtek P60), group 2, 3, 4 and group 6, 7, 8 (AeliteFlo, TetricFlow, Revolution/ Filtek P60). All specimens were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 1 mimute dwell time, immersed 2% methylene blue dye for 24 hours and then rinsed with tab water. The specimens were embedded in clear resin and sectioned longitudinally through the center of restoration with a low speed diamond saw. Dye penetration at gingival margin was viewed at 20 magnification and analyzed on a scale of 0 to 4. Kruscal-Wallis One way analysis and Mann-Whitney Rank sum test were used to analyze the results. The results of this study were as follows. 1. The leakage values seen at the enamel margin were significantly lower than those seen at the dentin margin(P<0.05). 2. On the enamel margin, packable composite resins with flowable liners showed lower leakage than those without flowable liners, but there were no significant differences among the four groups(P>0.05). 3. On the dentin margin, four groups demonstrated moderate to severe leakage, and there were no significant differences in leakage values(P>0.05).

• Restorative Dentistry and Endodontics
• /
• 제34권2호
• /
• pp.87-94
• /
• 2009

본 연구는 2008년 1월 현재 한국 치과의사들의 복합레진 사용 실태에 관한 설문 조사로서, 2급 와동을 수복하는 증례에서 치과의사의 면허 년도, 교육 배경 및 진료환경 등에 따라 수복재료의 선택, 복합레진의 사용여부 및 사용방법, 문제점 등을 비교하였다. 한국 치과의사들을 대상으로 2급 와동 수복에 관한 17 문항의 설문지를 제작하였다. 이 설문지는 시술자 정보, 2급 와동의 수복으로 크게 2부분으로 나누어진다. 이 설문지는 대한치과의사협회를 통해 12,193명의 치과의사들에게 E-메일로 발송되었다. 이 중 2,612개의 메일이 수신 확인되었고 840 개의 설문지가 작성되어 회신되었다 수신 확인된 메일 수에 대한 회신된 메일 수의 비율 (회신율)은 32.2%이었고, 이 자료는 SPSS 프로그램에서 카이제곱 분석을 이용하여 교차 분석하였다. 답변자의 비율은 면허년도를 기준으로 $1998{\sim}2007$년에 면허를 취득한 그룹 (한국 전체 치과의사의 33.3%, 추정년령 26-35세)이 60.3%로 1997년 이전에 면허 취득한 그룹 (한국 전체 치과의사의 66.7%, 추정 년령 36세 이상)의 39.7%보다 높은 것으로 나타났다. 또한 이들이 근무하는 병원은 개인의원 (77%)이 가장 많았고, 남자 치과의사 (79%)가 많았다. 복합레진 수복에 대한 지식은 학생 때 수업이나 학회 세미나를 통하여 (83.4%) 얻은 것으로 나타났다. 2급 와동 수복 시 재료 선호도를 살펴보면 금인레이가 65.7%를 차지하고 있고 복합레진 직접 수복은 12.1%로 낮게 나타났다. 2급 와동의 복합레진 직접 수복 시 시술 방법에 있어서는 러버댐을 사용하지 않거나 잘 사용하지 않는 그룹의 비율 (74.4%)이 더 많았고, 격벽법으로는 mylar strip (53.4%)이나 metal matrix (33.8%), Palodent system (6.5%)를 사용하였다. 충전은 적층법 (99.6%)을 사용하는 것으로 나타났으며, 시술 시 인접면 형성을 가장 어려워하였다(57.2%). 2-step 접착시스템 (76%)이 3-step 접착시스템 (16%)보다 많이 사용되고 있었다. 사용하는 레진 제품으로는 Z250 (20%)이 가장 많이 사용되고 있었다.

• Restorative Dentistry and Endodontics
• /
• 제19권2호
• /
• pp.473-484
• /
• 1994

To investigate the effect of resin cement, which had been known to increase the adhesive capacity of the cast gold inlay, on the gingival marginal fit and whether the tin-planting of the beveled area affects the marginal fit, Class II cast gold inlays were made on the 25 sound molars. Control group(ZPC goup) was cemented with the ZPC by conventional method. Experimental groups were cemented with the resin cement(Super-hond & $Panavia_{EX}$) and subdivided further by the existence or nonexistence of the tin-plating of the beveled area(ST & PT groups: with plating, SNT & PNT groups: without plating). So, each group was consisted of 5 teeth and the gingival margin of each specimen was mesiodistally sectioned by 3 times and the marginal and internal gap were evaluated by the Stereo Microscope (${\times}180$) and the Scanning Electron Micrascope(${\times}5,000$) was used for examining the adhesive relationship of the resin cement to the cavity wall and to the cast gold surface. The results were as follows : 1. Marginal gap was less than internal gap in all groups. 2. ZPC and SNT(bevel without tin-plating) groups showed the least gap and gap in PNT(bevel without tin-plating) group, ST(bevel with tin-plating) group, PT(bevel with tin-plating) group showed the greater value in order in evaluation of the both internal gap and marginal gap. 3. With the exception of the relationships between ZPC and SNT groups, ST and PNT groups, relationships between any other groups showed the statistical significance in the internal gap(p<0.05). 4. In the marginal gap, all relationships between groups showed the statistical significance (p<0.05) except the relationships between ZPC and SNT groups, ST and PNT groups, ZPC and PNT groups. 5. ZPC group showed more soluble phenamena than the resin groups(ST, SNT, PT, PNT). 6. Resin cement showed the void spaces in spite of good penetration into the micro-irregularities on both the tooth surface and the cast surface. The void was shown more in PT and PNT groups than in the ST and SNT groups. 7. After the treatment of heat and desiccation for SEM specimen, resin cements were detached more easily from the tooth surface than from the cast surface.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.153-161
• /
• 2001

The purpose of this study was to evaluate microleakage of six current dentin bonding systems. In this in vitro study, class V cavities were prepared on buccal and lingual surfaces of thirty extracted human molars. Each margin was on enamel and dentin/cementum. Experimental teeth were randomly divided into six groups of 5 each. Group 1 : Scotchbond Multi-Purpose; Group 2 : Single Bond; Group 3 : Prime&Bond NT ; Group 4 : Clearfil Liner Bond 2 ; Group 5 : MAC Bond II ; Group 6 : One-up Bond F. The bonding agent and composite resin were applied to class V cavities according to manufacturer's directions. After thermocycling, the specimens were immersed in 0.5% basic fuchsin dye solution for 6 hours and sectioned longitudinally through the center of the restoration with a low speed diamond saw. The degree of microleakage was measured as the extent of dye penetration under the stereomicroscope at $\times$20. The data were analyzed using one way ANOVA. When significant differences found. multiple comparisons were made using Duncan's Multiple Range Test. The results of this study were as follows: 1. In all groups, leakage value seen at the enamel margin was significantly lower than that seen at the dentin margin(P<0.001). 2. At the enamel margin, none of the dentin bonding systems used in this study showed statistically significant difference in leakage values(P<0.05). 3. At the cementum margin, group 3 showed the highest leakage value, and others were decreased as group 5, 6, 4 in that order, and group 1, 2 showed the lowest leakage value. There was statistically significant difference between group 3 and the other groups except for group 5(P<0.05).

• 대한치과보철학회지
• /
• 제47권2호
• /
• pp.182-190
• /
• 2009

연구목적: 본 연구의 목적은 복합 레진(Z250)으로 수복한 5급 와동에서 변연부 미세누출에 대한 3종의 레진 표면 전색제(Fortify, Permaseal, Biscover LV)의 효과를 평가하는 것이다. 연구 재료 및 방법: 3개월 이내에 발거된 건전한 40개의 소구치와 대구치에 백악-법랑 경계를 중심으로 교합측 변연은 법랑질에, 치은측 변연은 백악질에 위치하도록 5급 와동을 협면과 설면에 각각 형성하였다. Clearfil SE bond와 복합 레진으로 충전한 치아를 무작위로 4개의 군으로 분류한 후 대조군을 제외한 실험군은 각각 20개의 와동에 레진 표면 전색제 3가지 제품을 각각 적용하고 24시간동안 생리식염수에 보관하였다. 보관한 시편을 열순환시킨 후 24시간 동안 2% methylene blue 염색 용액에 담가 두었다가 투명 레진에 매몰하였다. 매몰한 시편을 협설면의 충전물 중앙을 지나도록 절단한 후 현미경을 사용하여 교합면측과 치은측 변연부의 염색 용액의 침투도를 관찰함으로써 미세누출 여부와 정도를 분석하였다. 결과: 복합레진으로만 수복한 대조군은 실험군에 비해 교합면측과 치은측에서 미세누출이 컸으며 통계적으로 유의한 차이가 있었다(P<0.05). 레진 표면 전색제를 적용한 실험군들 사이에는 교합면측과 치은측 모두 통계적으로 유의한 차이가 없었다(P>0.05). 각 군의 교합면측과 치은측의 변연 미세누출을 비교 시 통계적으로 유의한 차이가 없었다. Fortify는 대조군과 비교시 치은측에서는 통계적으로 유의한 미세누출 감소 효과가 없었다. 결론: 복합레진으로 충전한 5급 와동 변연에 레진 표면 전색제를 적용한 경우 교합면측과 치은측 변연에서 미세누출 감소 효과가 있었다. 그러나 치은측 변연은 레진 표면 전색제의 적용 후에도 미세누출을 보이므로 각별히 주의를 요해야 할 것으로 사료된다.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.321-337
• /
• 2000

Dental caries, one of the most frequent dental disease, become larger because it can be thought as a simple disease. Further more, it can progress to unexpected root canal therapy with fabrication of crown that needs reduction of tooth structure. Base is required in a large caries and ZOE, ZPC, glass ionomer are used frequently as base material. They, with restorative material, can affect the longevity of the restoration. In this study, we assume that the mandibular 1st molar has deep class I cavity. So, installing the 3 base material, 3 kinds of fillings were restored over the base as follows; 1) amalgam only, 2) amalgam with ZPC, 3) amalgam with ZOE, 4) amalgam with GI cement, 5) gold inlay with ZPC, 6) gold inlay with GI cement, 7) composite resin only, 8) composite resin with GI cement. After develop the 3-dimensional model for finite element analysis, we observe the distribution of stress and temperature with force of 500N to apical direction at 3 point on occlusal surface and temperature of 55 degree, 15 degree on entire surface. The analyzed results were as follow : 1. Principal stress produced at the interface of base, dentin, cavity wall was smallest in case of using GI cement as base material under the amalgam. 2. Principal stress produced at the interface of base, dentin, cavity wall was smaller in case of using GI cement as a base material than ZPC under gold inlay. 3. Composite resin-filled tooth showed stress distributed over entire tooth structure. In other words, there was little concentration of stress. 4. ZOE was the most effective base material against hot stimuli under the amalgam and GI cement was the next. In case of gold inlay, GI cement was more effective than ZPC. 5. Composite resin has the small coefficient of thermal conductivity. So, composite resin filling is the most effective insulating material.

• 치위생과학회지
• /
• 제13권3호
• /
• pp.330-338
• /
• 2013

5급 와동에서 상아질 접착제와 레진의 종류에 따른 미세누출을 알아보고자 64개의 건전한 상 하악 소구치 및 대구치에 5급 와동을 형성하였다. 형성된 와동에 4종의 상아질 접착제를 각각 적용하고 2종류의 복합레진을 수복하여 법랑질과 상아질 변연부 색소침투 정도를 실체현미경하에서 23배율로 관찰하여 미세누출 점수를 기록한 후 각 군 간의 유의성을 검정하였다. 연구 결과, 5급 와동 수복 시 상아질 접착제와 레진의 종류에 따른 미세누출은 통계적으로 유의하지 않았다. 그러나 복합레진 Filtek Z350XT Universal 적용 시 1단계 자가부식 접착제 Adaper Easy Bond에서 미세누출이 낮게 나타났고, 유동성레진 Filtek Z350XT Flowable 적용 시 3단계 전부식 접착제 Adaper Scotchbond Multi-Purpose, 2단계 전부식 접착제 Adaper Single Bond 2에서 미세누출이 낮게 나타났다. 따라서 복합레진 및 상아질 접착제의 선택적 적용이 가능하며 특히, 1단계 자가부식 상아질 접착제 적용 시 조작의 편이성과 시술시간의 단축에 유리할 것으로 생각된다.

• Imaging Science in Dentistry
• /
• 제48권2호
• /
• pp.87-96
• /
• 2018

Purpose: The present study aimed to evaluate which of the following imaging methods best assessed misfit at the tooth-restoration interface: (1) bitewing radiographs, both conventional and digital, performed using a photostimulable phosphor plate (PSP) and a charge-coupled device (CCD) system; (2) panoramic radiographs, both conventional and digital; and (3) cone-beam computed tomography (CBCT). Materials and Methods: Forty healthy human molars with class I cavities were selected and divided into 4 groups according to the restoration that was applied: composite resin, composite resin with liner material to simulate misfit, dental amalgam, and dental amalgam with liner material to simulate misfit. Radiography and tomography were performed using the various imaging methods, and the resulting images were analyzed by 2 calibrated radiologists. The true presence or absence of misfit corresponding to an area of radiolucency in regions subjacent to the esthetic and metal restorations was validated with microscopy. The data were analyzed using a receiver operating characteristic (ROC) curve, and the scores were compared using the Cohen kappa coefficient. Results: For bitewing images, the digital systems (CCD and PSP) showed a higher area under the ROC curve (AUROC) for the evaluation of resin restorations, while the conventional images exhibited a larger AUROC for the evaluation of amalgam restorations. Conventional and digital panoramic radiographs did not yield good results for the evaluation of resin and amalgam restorations (P<.05). CBCT images exhibited good results for resin restorations(P>.05), but showed no discriminatory ability for amalgam restorations(P<.05). Conclusion: Bitewing radiographs (conventional or digital) should be the method of choice when assessing dental restoration misfit.

• Restorative Dentistry and Endodontics
• /
• 제9권1호
• /
• pp.69-79
• /
• 1983

This study was undertaken to evaluate the effects of varnish application and thermocycling on the marginal leakage. 240 cavities of Class V were prepared on the 120 extracted premolars, and the cavities were filled with amalgam, Heliosit$^{(R)}$, and Hipol$^{(R)}$ after application of Copalite$^{(R)}$ or Duraphat$^{(R)}$. All specimens were immersed in methylene blue solution for 24 hours after thermocycling at $4^{\circ}C$ and $60^{\circ}C$, embedded in acrylic resin, and sectioned with low speed saw into two parts. The sectioned specimens observed with the metallurgical microscope. The following results were obtained: 1. The marginal seal was more effective in the amalgam-filled cavities after application of Copalite$^{(R)}$ threetimes or an application of Duraphat$^{(R)}$ varnish than in those without varnish applications. 2. Of the composite resin-filled cavities, the leakage of the varnish applied cases showed much more than without application. 3. There was no significant difference in the effect of marginal sealing between Copalite$^{(R)}$ and Duraphat$^{(R)}$ applications. 4. There was a significant difference in the degree of the marginal leakage of amalgam-filled cavities between the groups of thermocycling times, but no significant difference in the resin-filled cavities. 5. There was no significant difference in the degree of the marginal leakage between the Heliosit$^{(R)}$ and the Hipol$^{(R)}$ resin-filled cavities.