• Restorative Dentistry and Endodontics
• /
• 제47권1호
• /
• pp.5.1-5.11
• /
• 2022

Objectives: This study aimed to assess the clinical longevity of a bulk-fill resin composite in Class II restorations for 3-year. Materials and Methods: Patient record files acquired from the 40 patients who were treated due to needed 2 similar sizes Class II composite restorations were used for this retrospective study. In the experimental cavity, the flowable resin composite SDR was inserted in the dentinal part as a 4 mm intermediate layer. A 2 mm coverage layer with a nano-hybrid resin composite (CeramX) was placed on SDR. The control restoration was performed by an incremental technique of 2 mm using the nano-hybrid resin composite. The restorations were blindly assessed by 2 calibrated examiners using modified United States Public Health Service criteria at baseline and 1, 2, and 3 years. The data were analyzed using non-parametric tests (p = 0.05). Results: Eighty Class II restorations were evaluated. After 3-years, 4 restorations (5%) failed, 1 SDR + CeramX, and 3 CeramX restorations. The annual failure rate (AFR) of the restorations was 1.7%. The SDR + CeramX group revealed an AFR of 0.8%, and the CeramX group an AFR of 2.5% (p > 0.05). Regarding anatomical form and marginal adaptation, significant alterations were observed in the CeramX group after 3-years (p < 0.05). The changes in the color match were observed in each group over time (p < 0.05). Conclusions: The use of SDR demonstrated good clinical durability in deep Class II resin composite restorations.

• 대한심미치과학회지
• /
• 제27권2호
• /
• pp.66-74
• /
• 2018

2급와동의 복합레진수복은 강한 컨택과 적절한 외형 형성이 쉽지 않은 치료술식이다. 이를 극복하기 위해 고안된 매트릭스 시스템들이 있으나, 이에 대해 익숙하지 않은 술자들은 여전히 어려움을 겪곤한다. 이에 쉽고 효율적으로 성공적인 결과를 얻을 수 있는 테크닉을 필요하다. 본 케이스 리포트에서는 2급 와동의 복합레진수복술식을 과정별로 설명하고, 쉽고 간단히 만족할 만한 결과를 얻을 수 있는 원칙들과 임상팁들을 설명하였다.

• Restorative Dentistry and Endodontics
• /
• 제35권2호
• /
• pp.116-124
• /
• 2010

본 연구에서는 복합 레진을 이용한 2급/5급 와동의 직접수복에 있어서 치과의사의 성별에 따른 술식의 차이를 비교하였다. 2008년 대한치과의사협회에 등록된 치과의사 12,193명을 대상으로 이 메일을 통한 설문조사를 실시하였다. 이 메일 수신이 확인된 2,632명 중 840명이 응답하였으며 응답자의 남녀 비율은(남 78.9%, 여 21.1%) 전체 치과의사의 남녀 비율과 유의한 차이를 보이지 않았다(p > 0.05). Chi-square test 와 multiple logistic regression analysis 를 이용하여 남녀간 술식의 차 이를 검증하였다. 2급 와동 수복에서 여자치과의사는 4회 이상의 적층 분할 수복을 하는 경향이 남자치과의사에 비해 1.87배 높았으며, 술식 당 30분 이상 소요하는 경향은 2.72배 높았다(p < 0.05). 5급 와동 수복에서 여자치과의사는 베이스를 사용하는 경향이 1.83배 높았으며, 술식 당 20분 이상 소요하는 경향은 1.63배 높았다(p < 0.05). 본 설문조사에 따르면 남녀 성별에 따라 복합 레진 수복 술식의 차이가 존재하는 것으로 나타났다.

• 대한치과보철학회지
• /
• 제47권3호
• /
• pp.342-347
• /
• 2009

연구 목적: 제2급 와동에서 nanofilled 레진 충전 시 기구 조작 방향에 따라 변연 누출 가능성이 있다. 따라서 기구 조작에 따른 변연 누출을 줄이고자 인접면변연에 flowable 레진의 사용 유무에 따라 반복 하중 전후에 미세 변연 누출의 차이를 보고자 하였다. 연구 재료 및 방법: 건전한 상태의 24개의 발치 된 치아를 제2급 와동으로 형성한 뒤 그룹F는 nanofilled 레진으로 충전 시 flowable 레진을 liner로 사용하였고, 그룹 NF는 nanofilled 레진으로만 충전 하였다. 300N의 하중으로 $10^4$, $10^5$, $10^6$번의 반복하중을 가했다. 반복하중 전후로 모든 시편에서 전체 미세 변연 누출 길이 (T), 축면 미세 변연 누출 길이 (A), 치은 미세 변연 누출 길이 (G), 협측 미세 변연 누출 길이 (B), 설측 미세 변연 누출 길이 (L)를 측정하여, 각변연누출비율을 비교하였다. 통계는 Mann-Whitney test와 Wilcoxon signed ranks test로 하였다. 결과: 하중 전에 그룹F의 전체 미세 변연 누출 백분율은 0.6%이고 그룹 NF는 5.6%이며, 하중 후에는 그룹 F는 13.0%이고 그룹 NF는 36.3%로 그룹 NF에서 미세 변연 누출이 컸고, 반복 하중 횟수가 증가할수록 더욱 커졌으며, 부위상으로는 치은 변연의 미세 변연 누출이 컸다. 통계적 분석 결과 그룹NF의반복횟수별 하중 전후 비교에서 경계성으로 유의한 차이를 보였다. 결론: 제2급 와동에서 nanofilled 레진 충전 시 인접면 변연에 flowable 레진을 liner로 사용할 경우 반복 하중 전후에 미세 변연 누출의 감소에 영향을 주었다. 그리고 liner로 사용된 flowable 레진은 300 N의 반복 하중에서도 견딜 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.191-205
• /
• 1992

The purpose of this study was to evaluate the microleakage of class II composite resin inlays and compare them with the conventional light-cured resin filling restorations. Class II cavities were prepared in 60 extracted human molars with which cervical margins were located below 1.0mm at the cemento-enamel junction using No. 701 tapered fissure carbide bur. All of the prepared cavities were restored as follows and divided into 6 groups. Group I and 2 were restored using direct filling technique and group 3,4,5 and 6 were restored using direct inlay technique that was cemented with dual-cured resin cements. group I: Cavities were restored with light-curing composite resin, Brilliant Lux. group 2. Cavities were restored with light-curing composite resin, Clearfil PhotoPosterior. group 3: Cavities were restored with Clearfil CR Inlay and heat treated at $125^{\circ}C$ for 7 minutes. group 4: Cavities were restored with same material as group 3 and heat treated at $100^{\circ}C$ for 15 minutes. group 5: Cavities were restored with Brilliant (Indirect esthetic system) and heat treated at $125^{\circ}C$ for 7 minutes. group 6: Cavities were restored with same material as group 5 and heat treated at $100^{\circ}C$ for 15 minutes. All specimens were polished with same method and thermocycled between $6^{\circ}C$ and $60^{\circ}C$, then immersed in a bath of 2.0% aqueous solution of basic fuchsin dye for 24 hours. Dyed specimens were sectioned longitudinally and dye penetration degree was read on a scale of 0 to 4 by Tani and Buonocore's method 45). The results were as follows: 1. Microleakage was observed rather at the cervical margins than at the occlusal margins in all groups. 2. Composite resin inlay groups showed significantly less leakage than direct filling groups at the cervical margins (p < 0.001). 3. In composite resin inlay groups, there was no significant difference in microleakage between specimens by heat treating temperature and time (p > 0.05). 4. There was no significant difference in leakage between each groups at the occlusal margins (p > 0.05).

• Restorative Dentistry and Endodontics
• /
• 제7권1호
• /
• pp.131-138
• /
• 1981

The purpose of this study was to evaluate the marginal leakage of composite resin. Preparing 144 class V cavities on freshly extracted noncarious teeth, composite resins were prepared and inserted by one dentist according to the manufacturer's instructions. The experiments were performed in two different groups; In group I; Class V cavities with $90^{\circ}$ cavosurface angle, In group II; Class V cavities with $135^{\circ}$ cavosurface angle. And each group was divided 2 subgroups; In control group; composite resin restoraions without acid etch technique. In experimental group; composite resin restorations with acid etch technique. All specimens were immersed in 0.05% crystal violet solution. Before examination, the restored teeth were subjected to thermal stress. The specimens were sectioned occlusogingivally through the center of the restorations with a diamond disk. The sections were examined under a reflected light microscope at 1 day, 7 days and 30 days after immersing the specimens in dye solution. The results were as follows; 1. Control group of group I and group II showed marginal leakage. 2. The degree of marginal leakage in experimental group was greater reduced than control group. 3. In control group, the degree of marginal leakage in group I was greater than group II. 4. In experimental group, there is not statistical differences of the degree of marginal leakage between group I & group II.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.357-367
• /
• 1993

The purpose of this study was to evaluate the fracture strength of class II restored premolars with amalgam, posterior composite, amalgam - Ketac silver, resin - Ketac silver restorations at marginal ridge. Fifty extacted maxillary and mandibular premolar teeth that were caries free, fracture free, and restoration free were selected and randomly divided into five groups : Group 1 : 10 intact teeth, Group 2 : 10 teeth with class II cavities and restored with, amalgam, Group 3: 10 teeth with class II cavities and restored with posterior resin, Group 4 : 10 teeth with class II cavities and restored with amalgam - ketac silver, Group 5 : 10 teeth with class II cavities and restored with resin - Ketac silver. All teeth were mounted in base of dental stone within metal rings of 2cm diameter, exposing only the crown portion. Class II mesio - occlusal or disto - occlusal cavities were prepared into specimens of Group 2 through 5 by using a No. 710 fissure bur. The occlusal portion was prepared to a faciolingual width of 1.5mm and a pulpal depth of 1.5mm. The proximal protion was prepared to a faciolingual width of 4mm, a occlusogingival height of 4mm, and a gingival floor of 1.5mm. The teeth in Group 2 and 3 were resotored with silver amalgam apd posterior resin respectively. In Group 4 and 5, proximal portions were first filled with Ketac silver 1.5mm gingivally and remaining cavities were restored with amalgam and posterior resin respectively. All specimens were stored in 100 % relative humidity at $37^{\circ}C$ for 48 hours before testing. All teeth were subjected to a compressive load in a Universal Instron Testing Machine at marginal ridges. The loads required to fracture the restorations were recorded in killograms and the data obtained were subjected to statisticall analysis. The results were all follows : 1. The fracture strength of Group 1 which were unprepared were $100{\pm}10.1\;kg$ and the higher values than Group 2, 3, 4, 5 which were prepared and resotred. 2. In restored groups, Group 2 had the higher fracture strength($81.8{\pm}12.4\;kg$) than other groups and Group 4 had the lowest fracture strength($66.8{\pm}9.2kg$). 3. There were significant differences between fracture strength of between Group 1 and Group 3, 4, 5(P<0.05), but not significant difference between fracture strength of Group 2, 3, 4, 5(P>0.05).

• Restorative Dentistry and Endodontics
• /
• 제26권6호
• /
• pp.492-498
• /
• 2001

The purpose of this study was to evaluate four different composite resins in vitro for microleakage in Class II box type restorations that have gingival margins apical to the cementoenamel junction. Forty caries free extracted human molars were used in this study. The Class II cavities were prepared 1.0mm below cementoenamel junction with a #701 carbide bur. The teeth were randomly divided into four groups, each group comprising 20 treated cavities according to adhesives and filling materials ; Group 1: Scotchbond Multipurpose/Z 100. Group 2: Ariston Liner/Ariston pHc, Group 3: One Step/Pyramid, Group 4: Prime & Bond NT/SureFil. To simulate the clinical situation during restoration placement, a restoration template was fabricated and composite resin was filled using a three sited light-curing incremental technique. The specimens were stored in the 100% humidity for 7 days prior to thermocycling. The specimens were immersed in 2% methylene blue dye solution for 24 hours and then embeded in transparent acrylic resin and sectioned mesiodistally with a diamond wheel saw. The degree of marginal leakage was scored under the stereomicroscope($\times$20) and the data were analyzed by Kruskal Wallis test and Mann Whitney test. (omitted)

• 대한치과교정학회지
• /
• 제49권2호
• /
• pp.116-123
• /
• 2019

As an alternative to the conventional fixed appliance that uses orthodontic brackets, a simple round tube without a bonding base can be bonded to the tooth surface by covering the tube with flowable resin. In this technique, bent wires cannot be inserted into the simple tubes; therefore, repositioning of the simple tubes is often required for adjustments. To reduce repositioning of simple tubes, a dome-shaped resin covering of the simple tube can be designed with a customized in-and-out compensation, using three-dimensional computer-aided design software based on digital simulation of orthodontic tooth movement. In the present case, the use of simple tubes bonded with customized resin coverings in a Class I nonextraction case is described in a 17-year-old male, in whom moderate crowding of the anterior teeth was treated over an 8-month period. This case shows that simple tubes can be used as an alternative to brackets in some Class I nonextraction cases, with the potential benefit of reducing decalcification.

• Restorative Dentistry and Endodontics
• /
• 제30권5호
• /
• pp.363-371
• /
• 2005

본 연구는 2급 복합레진 수복 시 다양한 두께의 유동성 레진 이장이 법랑질 또는 상아질 치은측 변연부의 미세누출에 미치는 영향을 평가하기 위하여 시행하였다. 발거된 상, 하악 대구치의 근심 또는 원심면에 2급 와동을 형성하고 혼성복합레진만으로 충전한 군 (대조군)과 유동성 레진을 치은측에 0.5 mm (실험 1군), 1 mm (실험 2군), 2 mm (실험 3군) 두께로 이장한 후 복합레진을 충전한 군으로 분류하였다. 각 군은 $5^{\circ}$와 $55^{\circ}C$에서 500회 열순환을 시행한 후 $2\%$ methylene blue에 24시간 동안 침적시켜 광학 입체현미경하에서 변연부의 색소 침투를 관찰하였다. 본 연구의 결과 유동성 레진의 다양한 두께는 복합레진 수복물의 변연부 미세누출에 영향을 미쳤다. 복합레진을 이용한 구치부 2급 와동 수복 시 법랑질 또는 상아질 변연에서 0.5 mm두께로 유동성 레진을 적용하는 것이 미세누출 감소에 효과적인 것으로 나타났다.