• 한국정밀공학회지
• /
• 제28권2호
• /
• pp.193-201
• /
• 2011

Clamp type transferring mechanism for package substrate's wet processes was newly developed instead of conventional roller type transferring mechanism. Clamp type transferring mechanism has the advantages of reducing the panel deflection and of minimizing the contact problem between the panel and the transferring mechanism. Individual clamp of the mechanism has two distinct mechanical functions which are perfectly fixing a panel during the transferring and generating adequate tension for the panel. To determine the mechanical parameters of the clamp, panel deflection simulation was conducted and the result was verified by the panel deflection measurement. Also, fixing angle of a clamp could be determined by the free body force analysis of individual clamp. Finally clamp type transferring mechanism was actually manufactured and the transferring performance was verified during the water spraying condition of the package substrate's wet processes.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.735-740
• /
• 2005

항만에서 작동중인 컨테이너 크레인에 갑작스러운 돌풍에 의해 크레인이 밀리는 현상을 방지하기 위한 안전장치로 레일 클램프가 적용되고 있다. 본 연구에서는 이러한 레일 클램프 중에서 특히 레일의 손상과 레일 클램프 수명을 향상시킬 수 있는 쐐기형 레일 클램프을 제작하기 위한 기초 설계에 관한 연구를 수행하였다. 특히, 조의 회전을 방지하고 적절한 가압력을 발휘할 수 있는 쐐기각을 설정하기 위해, 우선조의 설계 치수와 회전력의 관계에 대한 하중분석을 수행하고, 여기에서 최대 쐐기각을 도출하고, 이후 수치 해석을 통한 강성도 분석을 통하여 최소 쐐기각 $6^{\circ}$를 제안한다. 또한, 제작된 레일 클램프를 통한 실험으로 검증하였다.

• 문화기술의 융합
• /
• 제8권3호
• /
• pp.265-270
• /
• 2022

본 연구는 콘크리트 궤도용 탄성레일체결장치(System 300-1)의 손상취약부에 관한 실험 및 해석적 연구이다. 콘크리트 궤도에서 탄성레일체결장치는 열차주행 시 레일과 침목을 결속하는 핵심 궤도구성품이다. 레일체결장치 구성품 중 방진패드와 텐션 클램프(Tension Clamp)는 압축력과 부상력에 대응하며 상시 변형이 발생되는 피로부재이다. 본 연구에서는 동일구간의 운행선에서 6년, 11년, 16년 동안 사용된 탄성레일체결장치를 채취하여 사용년수에 따른 텐션 클램프의 잔류변형 특성을 분석하였다. 또한 수치해석을 바탕으로 주요 구성품별 거동메커니즘을 분석하고 손상취약부를 도출하였다. 본 연구에서 수행한 수치해석을 통해 체결력 도입부터 외력 작용에 따른 텐션 클램프 각부의 응력(변형율)을 분석하여 텐션 클램프의 손상취약부를 도출하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.294-297
• /
• 2006

The rail clamp is the device to prevent the crane slips along a rail from the wind blast as well as to locate a container crane in the set position during an operating mode. In this study we conduct the research for determining the proper position of supporter to prevent the overload applied to the rail clamp with respect to the wedge angle in the wedge type rail clamp. The friction force between the jaw pad and the rail to prevent that the crane slips along a rail, when the wind blows, is generated fly the rail-directional wind load. Accordingly the proper position of the supporter to prevent the overload is determined fly analyzing the forces applied to the rail clamp in the wedge working stage. In order to analyze the effect of the wedge angle on the position of supporter, 5-kinds of wedge angles, such as 2, 4, 6, 8, $10^{\circ}$, were adapted as the design parameter, and the wind speed of 40m/s was adapted as the design wind speed criteria.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.81-85
• /
• 2006

In this study, we have been examined nano Injection Molding process which can improve transcription of 100nm-level pattern. We changed the various parameter (temperature of injection mold, clamp force, temperature of nozzle) which can be influence for improving transcription. And we measured and analyzed shapes of 100nm-level pattern by Automic Force Microscope for proving transcription. We made the Blu-ray Disc sample for proving transcription. And we measured HF-Signal and jitter. As a result, when the temperature of mold is more than $120^{\circ}C$ and the clamp force is more than 10 ton, We reached over 95 percent of transcription compared with stamper pattern. And we reached in-spec. value for HF-Signal and Jitter. Then we reached over 95 percent of transcription compared with stamper pattern.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8812-8819
• /
• 2015

콘크리트 궤도 건설의 증가로 인한 레일 체결장치의 중요성이 커지고 있는 상황에서 최근 레일 체결장치의 부속품인 텐션클램프가 절손되는 사고가 발생되었다. 이는 현장상태, 운영기관, 열차운행조건 및 빈도 등 다양한 요인에 의한 것으로 텐션클램프의 거동관련 연구가 필요하다. 본 논문에서는 실내실험 및 유한요소해석을 통해 텐션클램프의 역학적 거동을 분석하였다. 실내실험을 수행하여 텐션클램프 체결력에 따른 응력 및 변위를 도출하고 이를 유한요소해석 결과와의 비교를 통해 해석 모델을 검증하였다. 또한 검증된 모델을 적용하여 열차 하중에 따른 텐션클램프의 변형과 응력을 도출하고, 응력 분석을 통해 텐션클램프의 피로에 대한 취약도를 파악하였다.

• 한국포장학회지
• /
• 제25권3호
• /
• pp.131-137
• /
• 2019

Carton clamps, one of forklift attachments, allow users to quickly handle shipping units such as unitized loads, large shipping cases, or crates without the requirement of pallets. As the use of palletless handling by clamp trucks increases, so does the need for simulation research on clamp truck handling. The frictional characteristics for various contact conditions of corrugated paperboards and their constituent boards were analyzed to obtain the data needed in the computer simulation for the handling of carton clamp truck. The overall mean of static-frictional coefficients between selected corrugated paperboards was 0.38 (±0.01), which was 1.3~1.6 times greater than 0.23~0.29 of the frictional coefficients between boards. The overall mean of static-frictional coefficients between the corrugated paperboards and the rubber contact pad was 0.82 (±0.02), which was about 1.1 to 2.8 times greater than 0.29~0.78 of the static-frictional coefficient between the linerboard and the rubber contact pad. The overall mean of kinetic-frictional coefficients between the corrugated paperboards was 0.35 (±0.01), and 0.76 (±0.02) between the corrugated paperboards and the rubber contact pad.

• 한국농공학회지
• /
• 제43권6호
• /
• pp.113-119
• /
• 2001

Experiments on the yield strength of pipe connectors made of metal wire, joint pins, pole pipes, multi span insertion joints, and T-clamp joints used in pipe houses were conducted. The strength of connections of a pipe connector made of metal wire was adequate but it had a big difference according to loading direction. Therefore as it is installed, its direction should be taken into consideration. The collapse load of pipes connected with a joint pin was lower than that of single pipes. In the part of frame member at which the great bending moment occurs, the use of joint pin should be avoided. Also experimental results showed that pole pipes for use in a part of frame buried under the ground were safe, and the strength of multi span insertion joints should be increased. The resistant moment of T-clamp was about 13.7% of a single pipe. In case that the external forces acting on left and right rafter are different. a unsymmetrical rotational force is produced at the multi span joint. If it is expected that the actual bending moment on the multi span joint is larger than resistant moment of T-clamp, a reinforcement to safely resist the rotational force is required.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.519-520
• /
• 2011

• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.561-568
• /
• 2014

Injection molding industries realize the necessity of developing family molds to improve competitiveness. One of the primary causes of manufacturing defective products is the imbalance of flow in a family mold. In this study, the family mold of a shelf for refrigerators is analyzed by using CAE software. First, the flow balance, clamping force, and injection pressure are analyzed for different gate diameters of two cavities. Second, the flow balance, clamping force, and injection pressure are improved when the two gate valves are open at different times. Finally, the results of filling analysis are compared with the test injection product.