• Journal of Ecology and Environment
• /
• 제44권1호
• /
• pp.45-53
• /
• 2020

Background: The black soldier fly (Hermetia illucens) is gaining attention as an efficient decomposer of food waste. However, recalcitrant compounds such as plastics mixed into food waste may have negative effects on its growth and survival. Moreover, its efficiency of food waste degradation may also be affected by plastics. In addition, salt (NaCl) can also be present in high concentrations, which also reduces the efficiency of H. illucens-mediated food waste treatment. In this study, we assessed the growth of black soldier fly larvae (BSFL) reared on food waste containing polyethylene (PE) and polystyrene (PS) and NaCl. The weight of BSFL was measured every 2-4 days. Survival and substrate reduction rates and pupation ratio were determined at the end of the experiment. Results: The total larval weight of Hermetia illucens reared on food waste containing PS was greater than that of the control on days 20 and 24. However, the survival rate was lower in the group treated with 5% PS, as was substrate reduction in all PS-treated groups. The weight of BSFL reared on food waste containing PE was lower than that of the control on day 6. PE in food waste did not affect the survival rate, but the pupation ratio increased and substrate consumption decreased with increasing PE concentrations. Regardless of the plastic type, the addition of NaCl resulted in decreased larval weight and pupation ratio. Conclusions: Larval growth of black soldier fly was inhibited not by plastics but by substrate salinity. Additional safety assessments of larvae reared on food waste containing impurities are needed to enable wider application of BSFL in vermicomposting.

• 방사성폐기물학회지
• /
• 제15권2호
• /
• pp.117-124
• /
• 2017

Densities of molten salt mixtures of eutectic LiCl-KCl with $UCl_3$, $CeCl_3$, or $LaCl_3$ at various concentrations (up to 13 wt%) were measured using a liquid surface displacement probe. Linear relationships between the mixture density and the concentration of the added salt were observed. For $LaCl_3$ and $CeCl_3$, the measured densities were significantly higher than those previously reported from Archimedes' method. In the case of $LiCl-KCl-UCl_3$, the data fit the ideal mixture density model very well. For the other salts, the measured densities exceeded the ideal model prediction by about 2%.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.768-773
• /
• 2000

Alnite clinker, which is based on CaO-SiO2-CaCl2 system, was synthesized by recycling Cl-containing waste, and its hydraulic properties were onvestigated. Alinite coinkers with two different chemical compositions were burned for 10∼30 minutes in the range of temperature, 1350∼1450$^{\circ}C$. The microstructures of those clinkers were characterized by powder X-ray diiffracuion analysis, optical microscope, and scanning electronic microscope and heat of hydration of alinite cements which was measured in order to investigate hydraulic properties. X-ray analysis shwoed that f-CaO in both clinkers with different compositions significantly was decreased with transforming C2S(belite) to C3S(alite). From the results of microscopy and scanning electron microscopy(SEM), crystal of synthesized alite(C3S) was larger and better crystallinity than that of ordinary portland cement.

• 방사성폐기물학회지
• /
• 제15권1호
• /
• pp.83-90
• /
• 2017

사용후핵연료 파이로프로세싱에서는 방사성 희토류 염화물($RECl_3$)을 함유한 LiCl-KCl 공융염폐기물이 발생되며, 핫셀시설에서 운영을 목적으로 단순한 형태의 공융염폐기물 처리공정을 개발하는 것이 필요하다. 본 연구에서는, LiCl-KCl 공융염폐기물 내 희토류 핵종 분리/고화공정의 단순화를 목적으로 $Li_2O-Al_2O_3-SiO_2-B_2O_3$계의 무기합성매질을 이용하여 LiCl-KCl 공융염 내 희토류 핵종(Nd)을 분리한 후 분리생성물을 바로 고화하는 시험을 실시하였다. 공융염 내 희토류 염화물($NdCl_3$) 대비 0.67의 무게비에 해당하는 무기합성매질의 양으로도 Nd 핵종을 98wt% 이상 분리할 수 있었고, 이 때 얻은 희토류 핵종 포집생성물은 약 50wt% 수준의 희토류 산화물 함량을 보유하고 있었으며, 이 포집생성물을 화학적 내구성이 우수한 단일상의 균질한 유리고화체로 제조할 수 있었다. 이 결과들은 LiCl-KCl 공융염폐기물 내 희토류 핵종의 분리/고화공정을 단순화하기 위한 방안수립에 활용될 수 있을 것이다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2018년도 춘계학술논문요약집
• /
• pp.53-54
• /
• 2018

U/RE was electrochemically recovered to LCC at $50mA/cm^2$ from LiCl-KCl salt containing $0.5wt%UCl_3$, $0.22wt%NdCl_3$, 0.15wt%$CeCl_3$ and $0.07wt%LaCl_3$. The Cd in the LCC deposit was removed during the distillation using Cd distiller. U/RE product of 107g obtained from the distiller was installed to TG and then heated to $1200^{\circ}C$ to be consolidated. Dense U/RE metal ingot was not acquired through the consolidation process because U/RE product had been partially already oxidized during the distillation process.

• 유기물자원화
• /
• 제27권4호
• /
• pp.5-13
• /
• 2019

본 연구는 음식물류 폐기물 건조분말(FWP)이 처리된 작물의 생육 효과와 FWP와 유기질비료(OF) 혼합물(MFOs)의 이화학적 특성 및 작물생육효과를 평가하기 위해 수행되었다. 3.11%의 NaCl을 함유하는 FWP를 250, 500 및 1,000 kg/10a 씩 상추와 배추에 처리하였을 때, 작물의 엽수, 엽장, 엽폭, 생물중 및 건물중 등과 같은 작물의 생육지수는 대조구보다 감소하였다. MFOs의 이화학적 특성 분석에서 FWP의 배합비율이 증가할수록 MFOs의 질소 및 인산 함량은 감소하였고, 염분함량은 증가하였다. 상추와 배추에 MFOs와 OF를 각각 처리한 후 작물의 건물중으로 생육을 평가할 때, 상추에서는 FWP 10~30% 범위에서, 배추는 FWP 10% 범위에서 유기질비료처리구(대조구)와 유사한 생육을 나타내었다.

• 방사성폐기물학회지
• /
• 제11권4호
• /
• pp.325-332
• /
• 2013

사용후핵연료 파이로프로세싱에서 발생하는 LiCl-KCl 공융염폐기물의 부피를 최소화하고 최종적으로 잔류하는 폐기물을 비교적 낮은 온도에서 안정한 형태로 고화하고자 희토류 핵종 염화물을 함유한 LiCl-KCl 공융염을 이용하여 인산화/증류 및 세라믹 고화의 일련공정을 수행하였다. LiCl-KCl 공융염 내 희토류 염화물은 혼합인산화제($Li_3PO_4-K_3PO_4$)를 이용한 인산화 및 공융염 감압증류공정을 통하여 99% 이상을 인산화물 형태로 전환/분리할 수 있었고, 분리한 희토류 인산화물은 고화매질로서 LIP(Lead Iron Phosphate)를 이용하여 $1,050^{\circ}C$에서 균질하고 치밀한 형태의 고화체로 제조할 수 있었으며, 최종적으로 발생하는 방사성 폐기물 부피를 10% 이하로 감용할 수 있음을 확인하였다.

• 유기물자원화
• /
• 제4권2호
• /
• pp.1-9
• /
• 1996

김치 공장의 배추 절임 폐수 및 배추 쓰레기를 이용한 효모 균체 생산 가능성을 조사하였다. 절임 폐수는 약 1g/L의 환원당과 7~12%의 높은 NaCl을 함유하고 있으며 pH는 약 5에서 6사이로 내염성 효모가 생육 가능한 것으로 밝혀졌다. 4종의 내염성 효모의 생육을 조사한 결과 Candida guilliermondii ATCC 6260이 가장 우수한 생육을 나타내었고, 배양 조건에 따른 절임 폐수에서의 생육 특성을 조사한 결과, C. guilliermondii는 $25{\sim}35^{\circ}C$의 배양 온도, 절임 폐수의 초기 pH가 pH 3~6 그리고, 염농도 9%까지는 생육에 영향받지 않았으며 질산염이나 인산염의 첨가는 불필요한 것으로 나타났다. 이 효모를 절임 폐수에서 배양할 경우는 약 85%의 BOD 감소 효과를 보였다. 한편, 김치 공장에서 발생하는 배추 쓰레기의 자원화 방법으로 절임 폐수에 첨가한 결과 20% 첨가했을 경우 절임 폐수만 사용한 경우보다 약 5.5배 가량 균체 생산이 증가하였다.

• 방사성폐기물학회지
• /
• 제21권1호
• /
• pp.55-64
• /
• 2023

There is a gap in our understanding of the behavior of fused and molten fuel salts containing unavoidable contamination, such as those due to fabrication, handling, or storage. Therefore, this work used calorimetry to investigate the change in liquidus temperature of PuCl₃, having an unknown purity and that had been in storage for several decades. Further research was performed by additions of NaCl, making several compositions within the binary system, and summarizing the resulting changes, if any, to the phase diagram. The melting temperature of the PuCl₃ was determined to be 746.5℃, approximately 20℃ lower than literature reported values, most likely due to an excess of Pu metal in the PuCl₃ either due to the presence of metallic plutonium remaining from incomplete chlorination or due to the solubility of Pu in PuCl₃. From the melting temperature, it was determined that the PuCl₃ contained between 5.9 to 6.2mol% Pu metal. Analysis of the NaCl-PuCl₃ samples showed that using the Pu rich PuCl₃ resulted in significant changes to the NaCl-PuCl₃ phase diagram. Most notably an unreported phase transition occurring at approximately 406℃ and a new eutectic composition of 52.7mol% NaCl-38.7mol% PuCl₃-2.5mol% Pu which melted at 449.3℃. Additionally, an increase in the liquidus temperatures was seen for NaCl rich compositions while lower liquidus temperatures were seen for PuCl₃ rich compositions. It can therefore be concluded that changes will occur in the NaCl-PuCl₃ binary system when using PuCl₃ with excess Pu metal. However, melting temperature analysis can provide valuable insight into the composition of the PuCl₃ and therefore the NaCl-PuCl₃ system.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2926-2936
• /
• 2021

Rare-earth (RE) industries generate a massive amount of radioactive residue containing high thorium concentrations. Due to the fact that thorium is considered a non-economic element, large volume of these RE processed residues are commonly disposed of without treatment. It is essential to study an appropriate treatment that could reduce the volume of waste for final disposition. To this end, this research investigates the applicability of carbon-based adsorbent in separating thorium from aqueous phase sulphate is obtained from the cracking and leaching process of solid rare-earth by-product residue. Adsorption of thorium from the aqueous phase sulphate by carbon-based electrodes was investigated through electrosorption experiments conducted at a duration of 180 minutes with a positive potential variable range of +0.2V to +0.6V (vs. Ag/AgCl). Through this research, the specific capacity obtained was equivalent to 1.0 to 5.14 mg-Th/g-Carbon. Furthermore, electrosorption of thorium ions from aqueous phase sulphate is found to be most favorable at a higher positive potential of +0.6V (vs. Ag/AgCl). This study's findings elucidate the removal of thorium from the rare-earth residue by carbon-based electrodes and simultaneously its potential to reduce disposal waste of untreated residue.