• KSBB Journal
• /
• 제27권6호
• /
• pp.375-380
• /
• 2012

We previously reported that Ultra nattokinase$^{(R)}$ showed high fibrinolytic activity and revealed antithrombotic effect in rat blood plasma based on its ability to suppress collagen-induced platelet aggregation. This research was carried out to verify the clot lysing activity and blood flow enhancing effects of Ultra nattokinase$^{(R)}$ via monitoring and comparing the antithrombotic effects in rat artery between oral administration of Ultra nattokinase$^{(R)}$ and maltodextrin. SD rats were fed with 1.11 mg/kg of Ultra nattokinase$^{(R)}$ for 4 weeks. The effect on arterial thrombosis was then evaluated using an antithrombotic model after induction by $FeCl_3$. Detected fibrinolytic activity was proportional to the content of Ultra nattokinase$^{(R)}$ and statistical extents of the antithrombotic activity was enhanced strongly twice rather than control group. The PT and the aPTT, however, showed only a small difference between two groups. The results suggest that Ultra nattokinase$^{(R)}$ can effectively treat thromboembolism and enhance blood flow, and that Ultra nattokinase$^{(R)}$ can also prevent venous occlusion by aiding clot lysis.

• Corrosion Science and Technology
• /
• 제21권6호
• /
• pp.434-444
• /
• 2022

Corrosion inhibitors based on Zn-Al hydrotalcites containing benzoate (ZnAlHB) with different molar ratios of Zn/Al were prepared with a co-precipitation process. Compositions and structures of the resulting hydrotalcites were studied with suitable spectroscopic methods such as inductively coupled plasma mass spectrometry (ICP-MS), ultraviolet-visible spectrophotometry (UV-Vis), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and surface zeta potential measurements, respectively. Results of physico-chemical studies showed that crystallite sizes, compositions of products, and surface electrical properties were significantly changed when the molar ratio of Zn/Al was increased. The release of benzoate from hydrotalcites also differed slightly among samples. Anticorrosion abilities of hydrotalcites intercalated with benzoate at a concentration of 3 g/L on carbon steel were analyzed using electrochemical impedance spectroscopy (EIS), polarization curve, energy-dispersive X-ray spectroscopy (EDX), and SEM. Corrosion inhibition abilities of benzoate modified hydrotalcites in 0.1 M NaCl showed an upward trend with increasing Zn/Al ratio. The reason for the dependence of corrosion resistance on the Zn/Al ratio was discussed, including changes in the microstructure of hydrotalcites such as crystal size, density, uniformity, and formation of ZnO.

• Archives of Pharmacal Research
• /
• 제28권4호
• /
• pp.476-482
• /
• 2005

We investigated the pharmacokinetics of 11-hydroxyaclacinomycin X (ID-6105), a novel anthracycline, after intravenous (i.v.) bolus administration at a multiple dose every 24 h for 5 days in rats. To analyze ID-6105 levels in biological samples, we used an HPLC-based method which was validated in a pharmacokinetic study by suitable criteria. The concentrations of ID-6105 after the multiple administration for 5 days were not significantly different from the results after the single administration. The $t_{1/2\alpha}, t_{l/2\beta}, V_{dss}, and CL_{t}$ after the multiple administration were not significantly different from the values after the single administration. Moreover, the concentrations of ID-6105 1 min at day 1-5 after i.v. bolus multiple administration did not show the significant difference. Of the various tissues, ID-6105 mainly distributed to the kidney, lung, spleen, adrenal gland, and liver after i.v. bolus multiple administration. ID-6105 concentrations in the kidney or lung 2 h after i.v. bolus administration were comparable to the plasma concentration shortly after i.v. bolus administration. However, the ID-6105 concentrations in various tissues 48 h after i.v. bolus administration decreased to low levels. ID-6105 was excreted largely in the bile after i.v. bolus multiple administration at the dose of 3 mg/kg. The amounts of ID-6105 found in the bile by 12 h or in the urine by 48 h after the administration were calculated to be $14.1\% or 4.55\%$ of the initial dose, respectively, indicating that ID-6105 is mostly excreted in the bile. In conclusion, ID-6105 was rapidly cleared from the blood and transferred to tissues, suggesting that ID-6105 might not be accumulated in the blood following i.v. bolus multiple dosages of 3 mg/kg every 24 h for 5 days. By 48 h after i.v. bolus administration, ID-6105 concentrations in various tissues had decreased to very low levels. The majority of ID-6105 appears to be excreted in the bile.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.406-406
• /
• 2010

일반적으로, 나노스케일의 MOS 소자에서는 게이트 절연체 두께가 감소함에 따라 tunneling effect의 증가로 인해 PID (plasma induced damage)로 인한 소자 특성 저하 현상을 감소하는 추세로 알려져 있다. 하지만 요즘 많이 사용되고 있는 high-k 게이트 절연체의 경우에는 오히려 더 많은 charge들이 trapping 되면서 PID가 오히려 더 심각해지는 현상이 나타나고 있다. 이러한 high-k 게이트 식각 시 현재는 주로 Hf-based wet etch나 dry etch가 사용되고 있지만 gate edge 영역에서 high-k 게이트 절연체의 undercut 현상이나 PID에 의한 소자특성 저하가 보고되고 있다. 본 연구에서는 이에 차세대 MOS 소자의 gate stack 구조중 issue화 되고 있는 metal gate 층과 gate dielectric 층의 식각공정에 각각 중성빔 식각과 중성빔 원자층 식각을 적용하여 전기적 손상 없이 원자레벨의 정확한 식각 조절을 해줄 수 있는 새로운 two step 식각 공정에 대한 연구를 진행하였다. 먼저 TiN metal gate 층의 식각을 위해 HBr과 $Cl_2$ 혼합가스를 사용한 중성빔 식각기술을 적용하여 100 eV 이하의 에너지 조건에서 하부층인 $HfO_2$와 거의 무한대의 식각 선택비를 얻었다. 하지만 100 eV 조건에서는 낮은 에너지에 의한 빔 스케터링으로 실제 패턴 식각시 etch foot이 발생되는 현상이 관찰되었으며, 이를 해결하기 위하여 먼저 높은 에너지로 식각을 진행하고 $HfO_2$와의 계면 근처에서 100 eV로 식각을 해주는 two step 방법을 사용하였다. 그 결과 anistropic 하고 하부층에 etch stop된 식각 형상을 관찰할 수 있었다. 다음으로 3.5nm의 매우 얇은 $HfO_2$ gate dielectric 층의 정확한 식각 깊이 조절을 위해 $BCl_3$와 Ar 가스를 이용한 중성빔 원자층 식각기술을 적용하여 $1.2\;{\AA}$/cycle의 단일막 식각 조건을 확립하고 약 30 cycle 공정시 3.5nm 두께의 $HfO_2$ 층이 완벽히 제거됨을 관찰할 수 있었다. 뿐만 아니라, vertical 한 식각 형상 및 향상된 표면 roughness를 transmission electron microscope(TEM)과 atomic force microscope (AFM)으로 관찰할 수 있었다. 이러한 중성빔 식각과 중성빔 원자층 식각기술이 결합된 새로운 gate recess 공정을 실제 MOSFET 소자에 적용하여 기존 식각 방법으로 제작된 소자 결과를 비교해 본 결과 gate leakage current가 약 one order 정도 개선되었음을 확인할 수 있었다.

• 한국진공학회지
• /
• 제19권6호
• /
• pp.475-482
• /
• 2010

NiO 산화물 타겟을 이용한 RF 마그네트론 스퍼터 방법으로 유리 기판 위에 NiO 박막을 Ar 가스만을 사용하여 증착하였으며, 증착 온도에 따라 NiO 박막 특성에 미치는 영향을 조사하였다. XRD 측정으로부터 증착된 박막의 결정구조는 $200^{\circ}C$ 이하에서 (111) 면의 우선 배향성으로 보이다가 $350^{\circ}C$ 이상에서 (220) 면의 우선 배향성을 가지는 다결정 입방구조임을 확인하였다. NiO 박막의 전기적 특성의 변화는 기판의 온도가 $200^{\circ}C$까지는 $10^5\;{\Omega}cm$의 부도체에 가까운 높은 비저항을 보였고 기판의 온도가 $300^{\circ}C$ 이상에서는 $10^{-1}{\sim}10^{-2}{\Omega}cm$의 도체의 특성을 보이는 낮은 비저항으로 감소하는 Mott-Insulator Transition(MIT) 현상을 관측하였다. NiO 박막 내의 증착 온도 변화에 따른 ${\sim}10^7$ 정도의 큰 비저항 변화를 결정성, 결정립의 변화 및 밴드 갭의 변화 등으로 설명하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권7호
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).