• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.306-309
• /
• 1989

This paper describes the Manufacturing process and electrical properties of ac thick film electroluminescent lamps which made of the mixture of ZnS:Cu,Cl phosphor powder and polymer binding materials. The phosphor layer is sandwiched between two electrodes, one of which is transparent, and is supported by a substrate. The substrate may be glass or flexible plastic or it may be metallic. In this study we manufactured suspend layer which consists of ZnS:Cu,Cl powder suspended in a NBR. As yet our results are behind other commercial product in electrical properties and brightness. However they can be improved by selection of appropriate polymer binding materials, development of blending technology.

• 한국응용과학기술학회지
• /
• 제24권3호
• /
• pp.238-245
• /
• 2007

$Eu^{3+}$ doped $YGdO_3$ phosphors particles which have fine size and narrow size distribution with non aggregated uniform morphology were prepared by solvent evaporation method for the improvement of emission efficiency. Several parameters have been investigated in this study such as the influences of composition ratio of host materials, calcination temperature, amount of activator, surfactant, pH and flux on the photoluminescence intensity, particle size and dispersion. $Eu^{3+}$ doped $YGdO_3$ phosphor presented a strong narrow band emission peak at 612nm. The maximum emission intensity of$YGdO_3:Eu^{3+}$ occurred when $Eu^{3+}$ concentration is 3wt% under vacuum ultra violet excitation. Prepared phosphors were found to have small round-shaped particles about 150nm in size. The addition of PVA as a surfactant inhibits the grain growth and the agglomeration of particles efficiently by reducing the oxygen bridge bonds. As the pH reduces, PL intensity increase due to reducing the formation of oxygen bridge bonds. The particles prepared from solvent evaporation method with 5wt% LiCl were found to have 120% PL intensity compare to particles prepared without LiCl flux.

• 한국세라믹학회지
• /
• 제49권1호
• /
• pp.105-110
• /
• 2012

In this paper, a yellow phosphor $Sr_3SiO_5:Eu^{2+}$ that emits efficiently at the 450 nm excitation for warm white LED is studied. In addition, the effects of various flux $BaF_2$, $NH_4Cl$ on the emission spectra were investigated. The samples were synthesized through conventional solid state reaction under reducing atmosphere of 95% $N_2$-5% $H_2$ mixture at the high temperature. All phosphors showed a excitation band from 450 nm and broad band emission peaking at region of 580 nm. The optimal concentration of $BaF_2$ flux is 3 wt% for $Sr_3SiO_5$ with doping 0.05mol Eu phosphors fired in a reductive atmosphere. The phosphor showed highest emission peaking at 582 nm.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.415.2-415.2
• /
• 2014

Cost-effective, robust devices for solid-state lighting industry that converts electricity to light revolutionize the current lighting industry. Phosphor materials used in these devices should be synthesized in a low-cost and effective method for use in WLEDs. In this presentation, the synthesis of Eu3+ ions doped BaMoO4 phosphor samples by a facile synthesis process for red component of WLEDs will be shown. The tetragonal phase of the host lattice was substantiated by the X-ray diffraction patterns. The morphological studies were carried out by using a field-emission scanning electron microscope and transmission electron microscope. These confirmed the formation of a shuttle like particles with perpendicular protrusions in the middle of the particle. The photoluminescence (PL) properties exhibited good emission with a high asymmetry ratio when excited with ultraviolet B wavelengths (~ 280-315 nm). The cathodoluminescence (CL) spectra showed similar results to the PL spectra, indicating the rich red emission. The results suggest that this phosphor is a good material as red region component in the development of tri-band UV excitation based WLEDs.

• 대한전자공학회논문지SD
• /
• 제39권8호
• /
• pp.17-23
• /
• 2002

전자빔 증착 장비를 이용하여 SrS:CuCl TFEL 소자를 제작한 후, 발광특성을 조사하였다. 형광체 모체는 SrS 분말을 사용하였고, 발광중심체로는 CuCl 분말을 0.05 ~ 0.6 at% 범위에서 첨가하였다. 증착 온도 500℃, 전자빔 전류 20 ~ 40 mA 및 증착율 5 ~ 10 /sec의 조건에서 형광층 두께를 6000 으로 증착시켰다. CuCl 농도가 낮을 때에는 monomer, dimer, trimer 및 tetramer 발광센터에 의한 청색 발광을 확인할 수 있었으나 휘도가 낮았다. CuCl 농도가 높을 때에는 dimer와 trimer 발광센터에 의한 밝은 녹청색 빛을 방출하였다. 최적의 발광특성은 CuCl 농도를 0.2 at% 첨가한 SrS:CuCl TFEL 소자에서 관찰되었으며, 문턱전압, 휘도(L/sub 40/), 효율(η/sub 20/) 및 CIE 색좌표는 각각 55 V, 728 cd/㎡, 0.49 lm/W 및 (0.21, 0.33)을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3723-3729
• /
• 2010

We investigated the high-excitation voltage cathodoluminescence (CL) performance of blue light-emitting (ZnS:Ag,Al,Cl) and green light-emitting (ZnS:Cu,Al) phosphors coated with metal oxides ($SiO_2$, $Al_2O_3$, and MgO). Hydrolysis of the metal oxide precursors tetraethoxysilane, aluminum isopropoxide, and magnesium nitrate, with subsequent heat annealing at $400^{\circ}C$, produced $SiO_2$ nanoparticles, an $Al_2O_3$ thin film, and MgO scale-type film, respectively, on the surface of the phosphors. Effects of the phosphor surface coatings on CL intensities and aging behavior of the phosphors were assessed using an accelerating voltage of 12 kV. The MgO thick film coverage exhibited less reduction in initial CL intensity and was most effective in improving aging degradation. Phosphors treated with a low concentration of magnesium nitrate maintained their initial CL intensities without aging degradation for 2000 s. In contrast, the $SiO_2$ and the $Al_2O_3$ coverages were ineffective in improving aging degradation.

• 한국세라믹학회지
• /
• 제36권3호
• /
• pp.319-324
• /
• 1999

기존의 고상 반응법에 의해 합성된 YNbO4 : Bi 형광체의 발광특성을 개선하기 위하여 B2O3 융체 첨가법으로 형광체를 합성하고, 빛발광(PL) 및 저전압 음극선발광(CL)을 측정하였다. PL 및 CL 모두 415~440 nm 영역에서 강한 청색 발광 스펙트럼을 나타냈으며, 고상 반응의 경우와 마찬가지로 Y/Nb 비율이 화학 양론상의 1:1인 경우보다 결함구조를 인위적으로 조절한 51/49나 54/46에서 최대의 발광강도를 보였다. 한편, 고상 반응에서는 125$0^{\circ}C$에서 4시간 열처리하는 것이 최대의 발광효과를 나타냈으나, B2O3융제를 첨가하고 110$0^{\circ}C$에서 열처리한 시료가 결정성이 좋고 입자의 크기 및 형태가 균일하여 PL뿐만 아니라 CL에서도 우수한 발광특성을 보였다. B2O3융제를 첨가하는 방법으로 열처리 온도를 낮추고 입자크기와 형태를 조절하여 형광체의 휘도를 개선할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.343-346
• /
• 2001

To implementation of white electroluminescnet device in this paper, two methods were tried without synthesis of new white EL phosphor. At first, ZnS:Mn,Cl was mixed with ZnS:Cu from 20 to 50 weight percents. Second, ZnS:Mn,Cl was mixed with blue dye from 0 to 1.2 weight percents. The devices for experiments were measured as following; current-voltage, emission spectrum, brightness-voltage and CIE coordinate system and frequency properties.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권8호
• /
• pp.763-769
• /
• 1997

In this study we have synthesized Zno:Eu phosphors under various sintering atmospheres and temperatures. The analysis of X-ray diffractometer measurement indicates that for Zno:EuCl$_3$ phosphors sintered in air and vacuum 뗘 exists in the host lattice as Eu$_2$O$_3$and EuOCl respectively. From the photoluminescence for the phosphors sintered in vacuum Eu removes the broad-band emission of the ZnO host consequently isolating the red emission due to Eu$^{3+}$ ion and improves the color purity of red emission. The photoluminescence excitation and time resolving spectrum measurements suggest that energy-transfer process occurres from the self-activated defect center in ZnO host the Eu$^{3+}$ ion which exist in the host lattice in the form of EuOCl.

• 한국세라믹학회지
• /
• 제37권9호
• /
• pp.927-932
• /
• 2000

Mg(NO$_3$)$_2$가 용해된 IPA 용액에서 형광 분말의 전기영동법에 의한 증착 과정을 증착 시간, Mg(NO$_3$)$_2$의 농도 및 열처리 조건에 따라 분석하였다. 전기영동법으로 가장 두께가 균일한 형광막을 얻기 위한 Mg(NO$_3$)$_2$의 최적 농도는 $10^{-3}$~$10^{-4}$ M였다. 형광체의 접착력을 향상시키기 위해 새로운 방법을 고안하였다. 즉 전기영동법으로 증착된 형광막에 B$_2$O$_3$가 용해된 IPA 용액을 분사한 후 열처리를 하였다. 그 결과 기존의 PL 특성을 그대로 유지하면서 접착력을 향상시킬 수 있었다. 그러나 CL 휘도는 약간 감소하였다.