• KIEAE Journal
• /
• 제9권1호
• /
• pp.61-68
• /
• 2009

In this study, computer simulation program was using to identify the effects of road traffic noise propagation depending on the road types which are very variable in dense city. To achieve this goal, the roads should adjacent to housing complex were categorized into 7 types and propagation noise level should predicted then after simulation of noise exposure population calculation are carried out. Followings the results. First, the road types producing the higher noise level are R1, R2, R3 and R7. The lowest one is R6. And R4, R5 showed that some amount of noise level reduction. Second. the R6 road type which is tunnel shaped showed the highest noise level reduction in vertical distance gap. Last, the order of noise exposure population ratio is R1>R2>R7 and R6 showed the lowest.

• International Journal of Advanced Culture Technology
• /
• 제7권2호
• /
• pp.218-226
• /
• 2019

In modern society, people live in an environment with artificial or natural noise. Especially, the sound that corresponds to the artificial noise makes the noise itself and affects each other because many people live and work in the city. Sounds are generated by the activities and causes of various people, such as construction sites, aircraft, production machinery, or road traffic. These sounds are essential elements in human life and are recognized and judged by human auditory organs. Noise is a sound that you do not want to hear by subjective evaluation, and it is a loud sound that gives hearing damage or a sound that causes physical and mental harm. In this study, we introduce the method of stimulating the human hearing by finger vibration and explain the advantages of the proposed method in various kinds of a noise environment. And how to improve the sound quality to improve efficiency. In this paper, we propose a method to prevent the loss of hearing loss and the transmission of sound information based on proper signal to noise ratio when using portable IT equipment in various noise environments.

• 한국환경복원기술학회지
• /
• 제3권1호
• /
• pp.20-26
• /
• 2000

In order to propose the design and installation information of vegetation belt, field investigation were carried out in the noise pollution control facilities of highway and the streets of a city for two years(1998~1999), and field tests were performed to analyze the noise attenuation effect of them. The noise pollution control facilities were generally classified into three types (noise barrier and vegetation belt type, mounding and vegetation belt type, vegetation belt type only). Most soundproof facilities were proved the noise reduction effects. But according to width, height, structure, auditory distance and planting forms of them, difference of noise reduction effects were investigated. The soundproof facility was suitable the mounding and vegetation belt type in the consideration of road environment, and the installation standard of vegetation was estimated that the width of vegetation was at least 20m and the length of that was 2 times in the distance from noise source.

• 대한환경공학회지
• /
• 제30권6호
• /
• pp.593-598
• /
• 2008

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.598-599
• /
• 2013

• 한국도로학회논문집
• /
• 제14권3호
• /
• pp.33-39
• /
• 2012

배수성 포장에 있어 기능적 평가인 투수성 실험과 더불어 소음저감 측정을 서울시에서 시공한 구간에서 실시하였다. 소음측정은 두 가지 방법을 이용하였는데 그 방법은 Pass-by 방법과 NCPX(Novel Close Proximity) 방법을 이용하였다. Passby 방법은 교통량에 따른 소음원이 전달되는 것을 측정하는 방법이고, NCPX는 타어어와 포장 표면간의 마찰음을 측정하는 방법이다. 현장투수시험을 위해서는 총 5개의 구간에서 실시하였으며 각 구간마다 주행부와 비주행부로 나뉘어 측정하였다. 3개 구간의 Pass-by 측정을 위해서는 교통소음원 발생점으로부터 인접한 곳에서 측정을 실시하였고 또한 공원내부 혹은 단지 내부에서도 소음을 측정하였다. 마지막으로 NCPX 측정은 4군데서 실시하였다. 결과적으로 배수성 포장의 기능인 투수성과 소음저감이 2, 3년 사이에서는 그 기능을 잘 유지함을 알 수 있었다.

• Journal of Preventive Medicine and Public Health
• /
• 제5권1호
• /
• pp.1-7
• /
• 1972

During the period from June 1st 1971 to November 30 th 1971, studies on air pollution were made in Kwangju city. The city was divided into 6 areas; the downtown area, the semi-downtown area, the heavy traffic area, the commercial area, the residential area, the park area, 13 surveying sites were selected each representing the characteristics of the area. The Measurement methods which were used are described below. Sulfur oxides were measured by $PbO_2$ cylinder method, sulfur dioxides ($SO_2$) and carbon monoxide (CO) by the MSA & Kitakwa detector, dustfall by the Deposit gauge method, and the noise levels by the Kanomax soundlevel meter. The results obtained are as follows: 1. The mean value of sulfur oxides in Kwangju city was $1.16mg\;SO_3/day/100cm^2\;PbO_2$, ranging from $0.45mg\;SO_3/day/100cm^2\;PbO_2$ to $3.10mg\;SO_3/day/100cm^2\;PbO_2$. 2. The mean values of sulfur oxides according to its specific area in the city were $1.45mg\;SO_3/day/100cm^2\;PbO_2$ in heavy traffic area, 1.36 in downtown area, 1.23 in semi-downtown area, 1.11 in commercial area, 0.96 in residential area, and 1.07 in park area, respectively. 3. The average concentration of sulfur dioxide was 0.063 ppm from 2 to 5 P.M in Kwangju city. 4. The average concentrations of sulfur dioxides according to its specific area, from 2 to 5 P.M, in the city were 0.084 ppm in heavy traffic area & downtown area, 0.067 in commercial area, 0.053 in semi-downtown area, 0.052 in residential area, and 0.036 in park area. 5. The average concentration of carbon monoxide was 22.3 ppm from 2 to 5 P.M, in Kwangju city. 6. The average concentrations of carbon monoxide according to its specific area, from 2 to 5 P.M, in the city were 27.0 ppm in downtown area, 26.3 in semi-downtown area, 23.0 in heavy traffic area, 21.7 in commercial area, 20.0 in residential arera, and 17.6 in park area. 7. The mean value of dusifall in Kwangju city was $29.28ton/km^2/month$, ranging from $9.85ton/km^2/month$ to $66.34ton/km^2/month$. 8. The mean values of dustfall according to its specific area in the city were $50.37ton/km^2/month$ in semi-downtown area, 42.76 in heavy traffic area, 34.67 in downtown area, 17.77 in commercial area, 14.40 in park area, and 14.76 in residential area. 9. The mean values of the soluble dust in Kwangju city was $10.23ton/Km^2/month$ and that of the insoluble dust was $19.05ton/Km^2/month$. 10. The mean value of noise level in Kwangju city was 62 phon, ranging from 37 phon to 88 phon. 11. The mean values of noise level according to its specific area in the city were 76 phon in heavy traffic area, 67 in semi-downtown area, 64 in downtown area, 59 in commercial area, 52 in part area, and 50 in residential area.

• 제어로봇시스템학회논문지
• /
• 제15권12호
• /
• pp.1203-1208
• /
• 2009

Green IT based u-City means that u-City having Green IT concept. If we adopt the situation awareness or not, the processing of Green IT may be reduced. For example, if we recognize a lot of speech sound on CCTV in u-City environment, it takes a lot of processing time and cost. However, if we want recognize emergency sound on CCTV, it takes a few reduced processing cost. So, for detecting emergency state dynamically through CCTV, we propose our advanced speech recognition system. For the purpose of that, we adopt HMM (Hidden Markov Model) for feature extraction. Also, we adopt Wiener filter technique for noise elimination in many information coming from on CCTV in u-City environment.

• 대한환경공학회지
• /
• 제33권4호
• /
• pp.243-250
• /
• 2011

부산지하철 3개 노선에 대한 소음도 조사 및 비교 평가가 이루어 졌다. 차량이 역을 다 빠져 나간 순간부터 차량이 다음 역에 도착할 때까지를 기준으로 하여 차량 내부에서의 평균 소음값을 측정하였다. 또한 차량이 역사 도착 시 측정과 차량이 역사 출발 시 측정으로 나누어서 측정하였다. 주간시간대(오전9시~오후6시)와 야간시간대(오후6시~오후10시)로 구분하여 측정하였으나 주 야간 차이가 크지 않아 주 야간의 차이를 두지 않고 전체적으로 평균을 취했다. 2010년 5월과 7월 두 차례 부산지하철의 차량실내 소음도를 측정하여 실험에 대한 재현성을 검정하였다. 노선별 스크린 도어 효과, 도상조건, 열차차종 및 노선별 곡률반경 변화에 따른 소음도 차이가 조사되어 졌다. 부산지하철 3개 노선 중 2호선의 소음도가 가장 높았으며 이에 대한 방안도 강구 되었다. 스크린도어가 미설치된 역이 설치된 역에 비하여 소음도가 약 10 dB(A) 정도 높았으며 S 자형의 급곡선부에서 소음도가 높음이 확인되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.230-234
• /
• 2006

This study review about input data needing for noise mapping through the process for noise mapping to the Cheong-Ju on a middle-small scale city. Typically a technician know a input data in noise mapping but it is difficult to get the data. Even if we get the data, it is not regular type. So it take a long time to work out. This study is presented the guideline to solve this problems and indicate about getting data a scheme. and as it make a comparative study of the Europe case.