• Journal of Advanced Marine Engineering and Technology
• /
• 제35권1호
• /
• pp.89-95
• /
• 2011

이 연구에서는 대표적인 단순물체인 컨테이너선의 거주부를 모델링하여 모형선을 제작하였다. 그리고 거주부 측면에 디플렉터의 설치와 Sunken Deck의 개폐에 따른 거주부 후방의 배기가스 역류방지 효과를 회류수조에서 PIV 기법을 이용하여 계측하였다. 실험 장치는 고속카메라, 레이저, 이미지보드, 대용량컴퓨터로 구성된다. 거주부 후방에서 평균속도벡터와 축방향 속도를 구하여 그 결과를 서로 비교하였다.

• 수산해양기술연구
• /
• 제40권4호
• /
• pp.304-310
• /
• 2004

본 연구에서는 10톤급(9.77 G/T) 소형 연안어선의 저항성능을 회류수조를 이용한 모형시험을 통하여 조사하고, 저항성능개선을 위한 선형특성과 초기 트림에 대한 영향을 검토하였다. 본 연구를 통하여 다음과 같은 몇가지 결론을 도출할 수 있다. (1) 선미 A.P. 이후 돌출부 길이를 키우는 것은, 트림이 억제되면서 선수부 쇄파 현상이 커질 수 있으나, 선미단에서 빠져나가는 유체의 흐름을 개선시켜 저항성능을 크게 향상시킬 수 있다. (2) 적절한 초기 트림을 줌으로써 저항성능이 크게 개선될 수 있다. (3) 선수부 유체흐름을 개선시키기 위해 챠인의 폭을 줄인 선형보다는 이 폭을 그대로 유지하는 것이 파가 선체의 선측을 타고 올라가는 것을 방지하고 트림을 키워 성능측면에서 유리하게 작용한다.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.198-204
• /
• 2011

This paper presents the experimental result to investigate the characteristics of turbulent wake generated by submarine. A SUBOFF nude model which was assumed as an axial -symmetric body was used to create wake, and a thin strut was mounted on the top of the model. The experiments were conducted in a circulating water channel(CWC), and a hot-film was used to measure the turbulence in wake cross-section at the distance range of 0.0~2.0L from the model. The hot film anemometer measured turbulent velocity fluctuations, and the timeaveraged mean velocity and turbulent intensity are obtained from the acquired time-series data. Measured results show well the general characteristics of turbulent intensity, kinetic energy and mean velocity distribution. Also, experimental equations are derived. These experimental equations show well the general characteristics of the turbulent wake behind the submerged body with simple configuration.

• 한국해양공학회지
• /
• 제14권4호
• /
• pp.9-16
• /
• 2000

This paper deals with the numerical and experimental study on the characteristics of the flow around a sunken vessel. Numerical simulation of the two dimensional steady flow on the midship section are carried out by the CFD code which is developed by using finite volume method and which includes the standard $textsc{k}$-$\varepsilon$ model with standard wall function. A experimental study is also carried out for the 1/100 scale model in circulating water channel. A velocity fields around the ship are measuremed by using particle image velocimetry technique. And the fluid forces acting on the ship hull by uniform current are measured by two axis load cell. The computed and measured velocity fields on the midship section are compared with each other in the view point of velocity dstribution and reattachement length, which shows good agreement in quality. The drag force on the vessel also showed the same tendency in both computational and experimental results. However, the quantitative disagreements are shown due to the three dimensional effect of the experiment. The result are used to determine the functional efficiency and stability of the vessel as a artificial reef.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.364-371
• /
• 2011

This paper presents experimental results and derived experimental equations to investigate the turbulent wake characteristics generated by the self-propelled SUBOFF submarine model. A self-propelled SUBOFF model which was assumed as an axial-symmetric body was used to create wake, and a thin strut was mounted on the topside of the model. The experiments were conducted in a circulating water channel(CWC), and the hot-film was used to measure the turbulence in wake cross-section at the distance range of 0.0~2.0L from the model. The hot film anemometer measured turbulent velocity fluctuations, and the time-averaged mean velocity and turbulent intensity are obtained from the acquired time-series data. Measured results show well the general characteristics of turbulent intensity, kinetic energy and mean velocity distribution. Also, this paper presents derived experimental equations, which is extended result to the reference [1]. These experimental equations show well the general characteristics of the turbulent wake behind the self-propelled submerged body.

• 한국해양공학회지
• /
• 제27권6호
• /
• pp.1-6
• /
• 2013

A 25ft class fishing leisure boat is developed, and the resistance performances are investigated by a model test in a high-speed circulating water channel. The design speed of the developed ship is 25 knots using a 150 ps outboard engine. A catamanan type hull form using a planing section is adopted considering the Froude number and large deck area. The effect of a center body attached on the bottom of the cross deck is studied under various conditions. Wave patterns are observed to make clear the relationship between the resistance performance and the wave characteristics. The results show that the shape of the center body and the position of the chine line can have a strong effect on the resistance performance in a certain velocity range.

• 대한조선학회논문집
• /
• 제42권2호
• /
• pp.80-87
• /
• 2005

A set of experiments was carried out for obtaining the velocity field around the hydrofoil of finite span, using a wing of the NACA 0012 section in a circulating water channel. DPIV technique was used to measure the velocity field, and the velocity measurements along the span were done for 3 speeds, 3 submerged depths, and 4 angles of attack. Experimental data are compared with the theoretical assumptions, as well as the numerical findings by Lee and Lee(2004). Special care is given to the flow near the tips and in the region close to the leading edge. Though indirect, using the measured data of the velocity, it is now possible to compare the aerodynamic and the hydrodynamic strength of the circulation distribution of a wing in the framework of the lifting-line theory.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.465-472
• /
• 1999

Hydraulic model tests are performed to find economical and hdrqulically stable design of cooling water intake channel of steam power plant. The result of tests show that the standard distributiion of y-components in the chamber of CWP(circulating Water Pump) are recommended below 3.5 to maintain hydraulic stability, so that this value is considered as the design criteria. Common basin is necessary to improve the hydraulic stability of inflow, however the longer basin does not always improve the hydraulic stability , and the optimal length of basin can be found in some range. From the results the flow stability maintained the best condition when the length of basin is 7.2m. Beside the standard tests the auxiliary tests like edge , baffle, trapezoidal section and increase of pump capacity are carried out based on the optimal condition foudn in the standard tests. From the series of tests the economical and hydraulically stable design of intake channel was proposed.

• 한국수산과학회지
• /
• 제18권1호
• /
• pp.8-14
• /
• 1985

어구의 모형실험을 위한 회유수조를 제작하여 시험한 결과를 요약하면 다음과 같다. 1. 동력 50 H.P.의 D.C. Motor에 의하여 생기는 최대 유속은 약 2.3m/sec로서 지시전압 200 V, 지시전류 185 A에서 나타났다. 2. 유속과 전압과의 관계는 $0{\sim}1.0m/sec$까지는 비선형적으로 비례하나 1.0m/sec 이상에서 직선적으로 비례하였다. 3. 공칭 유속의 범위는 0.4m/sec에서 1.8m/sec까지이다. 그 이상으로 부터 최대 2.3m/sec까지는 수십분 이상 사용하며 모터의 과열현상이 나타났다 4. 수유 횡단면을 따르는 수직 유속분포는 수로중앙을 중심으로 좌우 약 70 cm까지는 0.2m/sec 이내의 차이를 나타냈다. 그러나 그 외부는 프로펠러의 크기, 벽과의 마찰로 인하여 급격히 감소한다. 5. 수심 중앙면을 따르는 수평적 유속 분포를 보면 유입부로 부터 관측부의 중앙까지는 수류변화가 거의 없으나 그 이후는 수로의 만곡에 따라 편향되었다.

• 한국전산유체공학회지
• /
• 제14권3호
• /
• pp.69-75
• /
• 2009

The objective of this study is to investigate the suitable design for a domestic Circulating water pump(CWP), which is used in cooling-water intakes for the unit 3 and 4 of Yeonggwang nuclear power plant. All the simulations are performed, using CFD method with a commercial code STAR-CCM+ version 3.02. After modeling a present design of the pump, the flow around the rotating blade was calculated by using quasi-static method and sliding mesh method with the almost same condition as an actual state. Based on fundamental simulations with various depth of sea water, the reference pressure for the boundary condition of the present study was decided. To verify the reliability of the calculation results, the suction flow rate of the data was compared with that of the experimental data. As a result of this comparison, it is confirmed that two results are fairly consistent. For the improvement of the suction flow rate, computational analysis was done by changing a flow channel and blade shapes. It is shown that the suction flow rate of the new pump was improved.