• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.22-23
• /
• 2008

The conventional IGBT has two problems to make the device taking high performance. The one is high on state voltage drop associated with JFET region, the other is low breakdown voltage associated with concentrating the electric field on the junction of between p base and n drift. This paper is about the structure to effectively improve both the lower on state voltage drop and the higher breakdown voltage than the conventional IGBT. For the fabrication of the circular trench IGBT with the circular trench layer, it is necessary to perform the only one wet oxidation step for the circular trench layer. Analysis on both the on state voltage drop and the Breakdown voltage show the improved values compared to the conventional IGBT structure. Because the circular trench layer disperses electric field from p base and n drift junction to circular trench, the breakdown voltage increase. The on state voltage drop decrease due to reduction of JFET region and direction change of current path which pass through reversed layer channel.

• 한국공작기계학회논문집
• /
• 제13권5호
• /
• pp.1-6
• /
• 2004

Measurements of circular motion accuracy of NC lathe have achieved with ball bar systems proposed by Bryan, but the ball bar systems have ifluenced on the measuring data by way of the accuracy of the balls and the contacts of balls and bar seats. Therefore in this study, error data during of circular motion of ATC(Automatic Tool Changer) of NC lathe will be acquired by reading zx plane coordinates using two optical linear scales. Two optical linear scales of measuring unit are fixed on z-x plane of NC lathe, and the moving part is fixed to ATC and then is made to receive data of coordinates of the ATC at constant time intervals using tick pulses comming out from computer. And then, error data files of radial direction of circular motion are calculated with the data read, and the aspect of circular motion are modeled to plots, and are analysed by means of statistical treatments of circularity, means, standard deviations etc.

• Advances in nano research
• /
• 제9권4호
• /
• pp.295-307
• /
• 2020

The vibrational characteristics of Multi-Phase Nanocomposite (MPC) reinforced annular/circular plate under initially stresses are presented using the state-space formulation based on three-dimensional elasticity theory (3D-elasticity theory) and Differential Quadrature Method (DQM). The MPC reinforced annular/circular plate is under initial lateral stress and composed of multilayers with Carbon Nanotubes (CNTs) uniformly dispersed in each layer, but its properties change layer-by-layer along the thickness direction. The State-Space based Differential Quadrature Method (SS-DQM) is presented to examine the frequency behavior of the current structure. Halpin-Tsai equations and fiber micromechanics are used in the hierarchy to predict the bulk material properties of the multi-scale composite. A singular point is investigated for modeling the circular plate. The CNTs are supposed to be randomly oriented and uniformly distributed through the matrix of epoxy resin. Afterward, a parametric study is done to present the effects of various types of sandwich circular/annular plates on frequency characteristics of the MPC reinforced annular/circular plate using 3D-elasticity theory.

• 한국전기전자재료학회논문지
• /
• 제21권11호
• /
• pp.981-986
• /
• 2008

The conventional IGBT has two problems to make the device taking high performance. The one is high on state voltage drop associated with JFET region, the other is low breakdown voltage associated with concentrating the electric field on the junction of between p base and n drift. This paper is about the structure to effectively improve both the lower on state voltage drop and the higher breakdown voltage than the conventional IGBT. For the fabrication of the circular trench IGBT with the circular trench layer, it is necessary to perform the only one wet oxidation step for the circular trench layer. Analysis on both the on state voltage drop and the breakdown voltage show the improved values compared to the conventional IGBT structure. Because the circular trench layer disperses electric field from the junction of between p base and n drift to circular trench, the breakdown voltage increase. The on state voltage drop decrease due to reduction of JFET region and direction changed of current path which pass through reversed layer channel. The electrical characteristics were studied by MEDICI simulation results.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1649-1660
• /
• 1996

The flow around a circular cylinder was controlled by an acoustic excitation issued from a thin slit along the cylinder axis. The static pressure distributions around the cylinder wall and flow characteristics in the near wake have been measured. Experiments were performed under three cases of Reynolds number, 7.8 * 10$\^$4/, 2.3 * 10$\^$5/ and 3.8 * 10$\^$5/. The effects of excitation frequency, sound pressure level and the location of the slit were examined. Data indicate that the excitation frequency and the slit location are the key parameters for controlling the separated flow. At Re$\_$d/, = 7.8 * 10$\^$4/, the drag is reduced and the lift is generated to upward direction, however, at Re$\_$d/, =2.3 * 10$\^$5/ and 3.8 * 10$\_$5/, the drag is increased and lift is generated to downward direction inversely. It is thought that the lift switching phenomenon is due to the different separation point of upper surface and lower surface on circular cylinder with respect to the flow regime which depends on the Reynolds number. Vortex shedding frequencies are different at upper side and lower side. Time-averaged velocity field shows that mean velocity vector and the points of maximum intensities are inclined to downward direction at Re$\_$d/ = 7.8 * 10$\^$4/, but are inclined to upward direction at Re$\_$d/ = 2.3 * 10$\^$5/.

• 대한전자공학회논문지TC
• /
• 제38권5호
• /
• pp.16-22
• /
• 2001

본 논문에서는 스파이럴 형태의 급전선을 갖는 마이크로스트립 원형 슬롯 안테나를 제안하였다. 이 구조는 편심 스파이럴 안테나를 평면적으로 구현한 것으로서, 주빔이 안테나 평면에 수직한 방향을 향하지 않고 기울어져 있으며 주빔의 방향으로 원형 편파를 갖는다. 또한 주빔의 방향이 주파수 변화에 따라서 ${\theta }$ 와 ${\phi }$ 방향으로 일정하게 변하므로 동작 대역 내에서 주빔의 방향을 예측할 수 있다는 장점이 있다. EM 시뮬레이션을 통하여 설계변수에 따른 안테나의 특성변화를 고찰하였으며 최적의 설계방법을 제시하였다. 최적화 된 구조는 1 octave 이상의 주파수 대역에서 주빔 방향으로 3 dB이하의 축비를 가진다.

• 디지털융복합연구
• /
• 제14권1호
• /
• pp.195-201
• /
• 2016

본 논문에서는 진폭-위상 복합비교 방향탐지 방식과 상관형 위상비교 방향탐지 방식의 방향탐지 정확도에 대해서 기술하였다. 복합비교 방식은 지향성 빔 특성을 갖는 스파이럴 안테나를 사용하고 상관형 방식은 블레이드 안테나를 사용하여 방위각 $360^{\circ}$를 동시에 탐지할 수 있는 균일원형배열(UCA: uniform circular array) 구조로 안테나를 배치하고 방위각의 방향탐지 정확도를 분석하였다. 3개의 안테나를 배치하는 경우 신호잡음비(SNR)가 20dB이고 파장에 대한 안테나 사이의 거리($D/{\lambda}$)가 0.5인 경우 복합비교 방식은 방향탐지 정확도가 $4.0^{\circ}$, 상관형 위상비교 방식은 방향탐지 정확도가 $1.8^{\circ}$로 나타나서 상관형 위상비교 방식이 정확도가 높은 것을 확인하였다.

• 콘크리트학회논문집
• /
• 제11권3호
• /
• pp.81-88
• /
• 1999

원형 철근콘크리트 기둥의 전단보강철근에 의한 저항강도의 평가를 위하여 전단에 의한 사인장 균열 면을 관통하는 원형 전단보강철근의 횡하중 작용방향의 평균 인장력을 산정하였다 이를 위하여 원형 전단보강철근이 이루는 원의 중심선간 직경, 수직 배근간격 및 기둥축 방향에 대한 사인장 균열면을 고려하였으며, 이들 변수들을 이용하여 원형 전단보강철근의 유효단면적을 계산하는 공식을 제안하였다. 연구결과, 원형 전단보강철근의 유효단면적 계산을 위하여 근 10년 간 사용되어 온 상수 계수가 모든 경우에 일률적으로 사용될 수 없음을 보여주고 있다 즉, 기존에 사용되는 원형전단철근 유효단면적은 기둥의 전단저항강도의 계산에 있어서, 전단철근의 배근간격이 비교적 넓은 비내지진 지역에서는 안전 측의 예측을 하게 되어 구조물의 안전상 큰 문제가 없지만, 배근간격이 촘촘하거나 원통형강관을 사용하게 되는 내진 지역에서는 기둥의 전단저항강도를 실제보다 20% 정도 과하게 예측하여 구조물의 안전에 좋지 않은 결과를 낳을 수도 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.148-153
• /
• 2001

A computational investigation of the effect of the electromagnetic force(or Lorentz force) on the flow behavior around a circular cylinder, a typical model of bluff bodies, is conducted. Two-dimensional unsteady flow computation for $Re=10^2$ is carried out using a numerical method of finite difference approximation in a curvilinear body-fitted coordinate system by solving the momentum equations including the Lorentz force as a body force. The effect of the spatial variations of the Lorentz forcing region and forcing direction along the cylinder circumference is investigated. The numerical results show that the Lorentz force can effectively suppress the flow separation and oscillation of the lift force of the circular cylinder cross-flow, leading to the reduction of the drag.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권1호
• /
• pp.25-33
• /
• 2005

When a circular tube with uniform heat generation within the wall was placed in a cross flow, heat flows by conduction in the circumferential direction due to the asymmetric nature of the fluid flow around the perimeter of the circular tube The circumferential heat flow affects the wall temperature distribution to such an extent that. in some cases, significantly different results may be obtained for geometrically similar surfaces. In the present investigation, the effect of circumferential wall heat conduction is investigated for forced convection around circular tube in cross flow of air and water Two-dimensional temperature distribution $T_w(r,{\theta})$ is calculated through the numerical analysis. The difference between one-dimensional and two-dimensional solutions is demonstrated on the graph of local heat transfer coefficients. It is observed that the effect of working fluid is very remarkable.