• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.49-52
• /
• 2000

The hole flanging experiments are performed on a flat circular plates with a hole in the center and the flangeability and fracture behavior of TRIP steel and ferrite-bainite duplex steel were examined. Over the ranges of conditions investigated, the flangeability of ferrite-bainite duplex steel is better than TRIP steel and the term 'hole flanging capacity' introduced in this study. Fracture behavior of TRIP steel and ferrite-bainite duplex steel was characterized by petal formation at the edge of flange. In case of crack propagation, crack tip diversion that is supposed to be responsible for flangeability occurs more severely on HSLA Steel.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1103-1110
• /
• 2015

Ratio of a day's tour for Geoje-si, 22.6 percent, has increased to 48.6 percent since the opening of Busan-Geoje fixed link. Eight cities of Yeungnam area including Busan-Ulsan and Daegu-Gyeongbuk has been directly affected by the changed route from GJ Bridge to BG Bridge. In order to compare the range of departure area for a one-day trip in Geoje tourist attractions before and after the new fixed link, duration variation of visitors is described as individual difference by normal distribution function. One-day tour trip model based on a circular trip is also suggested under comparatively simple supposition. Since average area after the opening is equal to maximum area before as minimum area after is equal to average area before, the effect of access improvement by the new bridge is revealed definitely. In addition, the effect of cities located in the middle and long distance is greater. Although cities proximity to Geoje are not influenced significantly, every citizen is capable of taking a one-day trip anywhere.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.147-152
• /
• 2002

Effect of lip shape on the hole flangeability of high strength steel sheets is investigated. Circular plates of various hole sizes are tested and the variation of lip length as well as the variation of thickness on the sectional views of the finished lip were studied. The conventional hole flanging process is limited to a certain limit hole diameter below which failure will ensue during the hole expansion. The intention of this work is to examine the effect of lip shape on the flangeability of TRIP steel and Ferrite-Bainite duplex steel and find out major parameters which can affect flanging shape of high strength hot rolled steels. Over the ranges of conditions investigated, the minimum hole diameter of F+B steel is better than TRIP steel. while, the lip-shape accuracy of TRIP steel is better than that of F+B steel. although the tensile strength and elongation of %P steel are superior than those of Ferrite-Bainite duplex steel, the flangeability is found to be not so strongly sensitive to the tensile properties but sensitive to displacement on the circumferential direction of hole edge.

• Journal of Welding and Joining
• /
• v.32 no.6
• /
• pp.1-7
• /
• 2014

For the resistance spot welds of CR1180 and GA1180 TRIP steels, the weld quality evaluation method using the digitalized X-ray transmission imaging apparatus was investigated in comparison with the crosssectional examination method. In the case of the resistance spot welding of CR1180, three circular regions, such as WZ(white zone), GZ(grey zone) and DZ(dark zone), appeared on X-ray image and they corresponded to the diameters of indentation mark, nugget and corona bond, respectively. The variation of X-ray transmission thickness due to the thickness variation of the weld seemed to be mainly responsible for the formation of those contrasts. The X-ray image contrast formed from the variation of transmission thickness at the outer border line of DZ could also enable the inspections of the notch shape, nonuniformity of the welding pressure and spatter from its sharpness, concentricity and the normal straight line, respectively. The X-ray image of the resistance spot weld of galvannealed GA1180 TRIP steel was very similar to that of CR1180 TRIP steel except the crown shaped outer border line of DZ which was considered to be due to the melting behavior of zinc having the boiling temperature even lower than the melting temperature of steel.

• Transactions of Materials Processing
• /
• v.10 no.6
• /
• pp.465-470
• /
• 2001

Hole flanging experiments are performed on flat circular plates with a hole in the center and the flangeability and fracture behaviors of TRIP steels and ferrite-Bainite duplex steels were examined. In the hole flanging, deformation by lip and petalling occurs when plates are struck by punches of various shapes and high circumferential strains induced in the target material cause radial cracking and the subsequent rotation of the affected plate material in a number of symmetric petals. In all cases, failure of the plate was due to lip fracture that results from multiple localized neckings that take place around the hole periphery where straining is most severe and a somewhat regular pattern was observed in a fracture shape. The neck characteristics in flange formation and the transition from the lip to petal mode at which fracture occurs were compared with two materials.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.103-113
• /
• 2022

As globalization progresses and localization takes place, interest in local culture is increasing. In line with this trend, the Cultural Heritage Administration has been promoting the Cultural Heritage Night Tour Project as a night-type cultural property tourism content since 2016. Cultural property nightlife, part of the regional regeneration project, creates new added value by converging and combining various historical and cultural-related contents centered on local cultural heritage. Although the "cultural nightlife" has been greatly activated, it is judged that changes are needed to continue. This is because fixed nightlife programs are positive in terms of establishing a nationwide network, but there is a limitation in that they cannot be standardized and expanded to various forms. Therefore, in this study, the meaning and limitations of nightlife programs were identified, and cognitive theory applicable to nightlife programs was considered. Through this process, it was confirmed that cognitive poetry's 'circular for dynamic semantic composition', 'surreal foreground', and 'adventures in time and space' can be applied to nightlife programs. As a result of combining cognitive poetry with nightlife programs, it was possible to present a strategy for implementing nightlife programs differentiated from existing nightlife programs.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.73-85
• /
• 2014

Approaching to aging society with increasing transportation vulnerable, most developed countries has positively promote low-floor bus. Such circumstance in Korea has plan to introduce low-floor bus to intra-city bus system which accounted for 30 percent of total number of buses however there is no specific operating plan for this matter. According to the revealed preference study on bus service, the study shows that the efficiency of low-floor is relatively low than that of other buses, therefore, it is necessary to establish feasible plan for bus route selection. Thus, this study is to conduct research on analyzing trip characteristics of transportation vulnerable and establish bus route selection measures for low-floor bus. The result from the survey in Jeollabuk-do Province reveals that the trip purpose of transportation vulnerable is mainly for welfare and medical service, which was made less than 6 times a week. Futhermore, 37.6 percent of transportation vulnerable use buses, thus, it is essential to improve its service quality for enhancing user's convenience and safety. In that transportation vulnerable O-D needs to be established and forecasts future demand for selecting optimal bus route. According to the estimation, route passing through densely populated areas with transportation vulnerable should take the first priority, city circular and other route would be next. Moreover, it is economically efficient that areas populated more than 200,000 with fixed route and less than 200,000 with limited route responsive to demands would be feasible plans. This study will have greater an impact on transportation planning and further research on transportation vulnerable.

• The Journal of Korean Philosophical History
• /
• no.28
• /
• pp.155-182
• /
• 2010

When we divide Environmental Ethics education into the elements of 'knowledge - emotion - behavior', we need to focus on 'knowledge' at high school level. In general Moral Education, 'knowledge - emotion - behavior' is a circular link, but as Environmental Ethics is a matter of 'consciousness', it is desirable to instruct with the process of 'knowledge>emotion, behavior'. Teaching 'Consciousness on Nature' is not recommended at elementary or middle school level because it demands higher inference. On the contrary, considering the reality in high school it is not recommended to teach the necessity and method of recycling or to go field trip to the polluted area. Rather, it is better to inform the students of Environmental Ethics' viewpoints and let them know the ways of moral judgments. The view of nature in Orientalism is well explained through the Environmental Ethics' viewpoint. To explain the view of nature in Orientalism we should concentrate on the theory, not on the attitude of life. And we should rather compare the viewpoints of nature in Confucianism, Taoism and Buddhism respectively than explain in Orientalism all together. That is, if we compare with the viewpoints of Environmental Ethics and explain similarities & differences in Confucianism, Taoism and Buddhism, we can complement Environmental Ethics or present the third approach.