• Fisheries and Aquatic Sciences
• /
• v.22 no.4
• /
• pp.8.1-8.9
• /
• 2019

A 12-week feeding trial was designed to evaluate the effect of total replacement of fish oil (FO) with terrestrial alternative oils on growth, feed utilization, body composition, hematological parameters, and fillet fatty acid profile of mandarin fish juveniles. Four iso-nitrogenous (56% crude protein) and iso-lipidic (13% crude lipid) practical diets were formulated. A control diet contained 6% FO and three other experimental diets were prepared by replacing FO with linseed oil, soybean oil, and lard (designed as FO, LO, SO, and lard, respectively). Each diet was randomly allocated to triplicate groups of 25 fish ($1.8{\pm}0.03g/fish$) in a circular tank. Complete replacement of FO by three tested alternative oils had no remarkable impact on growth performance, feed utilization efficiency, and morphological and hematological parameters of juvenile mandarin fish. However, daily feed intake was found to be significantly higher for fish fed the SO diet compared with those fed the FO and LO diets. Fish fed LO and SO diets exhibited significantly higher levels of the whole body lipid compared to fish fed diet containing FO. Fillet fatty acid composition reflected dietary fatty acid profile. The highest level of ${\alpha}$-linolenic acid, linoleic acid, and oleic acid was observed in fish fillet fed LO, SO, and lard, respectively. Although the eicosapentaenoic acid level of fish fillet fed diet FO was higher than other treatments, no significant difference was found in docosahexaenoic acid content among all dietary groups. The results of the present study clearly demonstrate that the complete replacement of FO in mandarin fish diets is achievable. These findings are useful in dietary formulation to reduce feed costs without compromising mandarin fish growth.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.116-122
• /
• 2019

Among the various wave power systems, Salter's duck (rotor) is one of the most effective wave absorbers for extracting wave energy. The rotor shape is designed such that the front part faces the direction of the incident wave, which forces it to bob up and down due to wave-induced water particle motion, whereas the rear part, which is mostly circular in shape, reflects no waves. The asymmetric geometric shape of the duck makes it absorb energy efficiently. In the present study, the rotor was investigated using WAMIT (a program based on the linear potential flow theory in three-dimensional diffraction/radiation analyses) in the frequency domain and verified using OrcaFlex (design and analysis program of marine system) in the time domain. Then, an experimental investigation was conducted to assess the performance of the rotor motion based on the model scale in a two-dimensional (2D) wave tank. Initially, a free decay test (FDT) was carried out to obtain the viscous damping coefficient. The pitch response was extracted from the experimental time series in a periodic regular wave for two different wave heights (1 cm and 3 cm). In addition, the viscous damping coefficient was calculated from the FDT result and fluid forces, obtained from WAMIT, are incorporated into the final response of the rotor. Finally, a comparative study based on experimental and numerical results (WAMIT & OrcaFlex) was performed to confirm the performance reliability of the designed rotor.

• Tribology and Lubricants
• /
• v.38 no.1
• /
• pp.27-31
• /
• 2022

Harmonic drives have attracted increasing attention with the development of materials, parts, and related equipment. Harmonic drives exhibit high deceleration, high accuracy, and light weight. The stiffness of flexible splines according to the radial load is studied using a commercial FEM program to design the structure of the flexible spline and finite element to improve the weight and price competitiveness of harmonic drives. In addition, several studies have measured and compared friction coefficients based on 3D printed tread patterns. However, owing to the characteristics of plastic materials, a decrease in stiffness in the radial direction is inevitable. To prevent a decrease in stiffness in the radial direction, we designed and manufactured flex splines with a wrinkle shape. Through structural analysis, the reaction force and stiffness in the radial direction were determined. In addition, the maximum angle of the mound was derived by theoretical calculations, and the performance of the harmonic drive was compared with the results obtained in the mound experiment. Structural analysis shows that the shape of wrinkles decreased the stress and reaction force and increased the safety factor in comparison with that of the circular shape. During performance verification through continuous experiments, the developed harmonic drive showed continuous performance similar to that of an actual tank model. It is expected that the flex spline with a compliant spring and wrinkle shape will prevent a decrease in the radial stiffness.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.34-42
• /
• 2023

Considering the contribution of industrial facilities to the national economy, securing operability against earthquakes is very important. However, the basic concept of current seismic design mainly allows ductile behavior of facilities against large-scale earthquakes and only considers structural safety for the purpose of preventing collapse. In order to secure the operability of industrial facilities, the level of seismic performance to maintain operability may vary depending on the structural behavior characteristics of the industrial facility, and a seismic design method is needed to satisfy this. In this study, a ground storage tanks Nonlinear seismic behavior characteristics(R-μ-T) were analyzed through nonlinear response history analysis, and based on this, a new reliability-based, performance-based seismic design method was proposed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.57 no.4
• /
• pp.342-348
• /
• 2024

This study evaluated the effects of defatted and non-defatted black soldier fly meal (BSFM) as a fish meal replacement in growing red seabream. Four isonitrogenous and isolipidic diets were formulated: 0% BSFM (D1), 5% defatted BSFM (D2), 5% non-defatted BSFM (D3), and 5% defatted + non-defatted BSFM (1:1, D4). A total of 360 growing red seabreams (mean ± SD body weight, 98.9±0.29 g) were equally distributed into 12 circular polyethylene tanks (1,000 L; 30 fish per tank; N=3 tanks per treatment). The red seabream were fed until satiation twice daily for 12 weeks. After 12 weeks, growth, feed utilization, whole-body proximate composition, blood parameters, and immune related parameters were measured. No significant differences were observed in weight gain, specific growth rate, feed conversion ratio, morphological parameters, plasma metabolites, plasma lysozyme, glutathione peroxidase, and superoxide dismutase among the experimental groups. However, immunoglobulin M (IgM) in fish fed D2 and D3 were significantly higher than those in fish fed D1. Additionally, the fish in D2 group showed higher IgM levels than those in the other treatment groups. These results indicate that defatted and non-defatted BSFM could be utilized as a potential feed ingredient for fishmeal replacement for red seabream.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.4
• /
• pp.401-412
• /
• 2008

Simulations of three-dimensional numerical wave tank are performed to investigate wave force acting on a large cylindrical structure and consequent wave deformation, which are induced by bore after breaking waves. The numerical model is based on the three-dimensional Navier-Stokes equations with a finite-difference method combined with a volume of fluid(VOF) method, which is capable of tracking the complex free surface, including wave breaking. In order to promote wave breaking of the incident wave, the approach slope was built seaward of the structure with a constant slope and a large cylindrical structure was installed on a flat bed. The incident waves were broken on the approach slope or flat bed by its wave height. In the present study, all waves acting on the large cylindrical structure were limited to breaking bore after wave breaking. The effects of the position of the structure and the incident wave height on the wave force and wave transformations were mainly investigated with the concern of wave breaking. Further, the relations between the variation of wave energy by wave propagation after wave breaking and wave force acting on the structure were discussed to give the understanding of the full-linear wave-structure interactions in three-dimensional wave fields.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.15 no.1
• /
• pp.5-16
• /
• 1979

At the holding of live anchovies which will be used as bait for the skipjack fishing, it is necessary to transrer the holding creel to the holding ground from the long distanted fishing ground. Usually, the creel made with net webbing and shaped like pound, was towed with a tow rope fastened to the front fringe or it, when two serious problems were found. The one was that the leading flap or the webbing of creel was drifted backward by the drag and caused to decrease the volume of the creel and made anchovies mortal. The other was that much time were spent to tow creels for long distance with slow speed, whereas to tow fast made anchovies worn out and caused them mortal. To prevent these defect, the authors carried out a model experiment in a circular flowing tank with a 1/15 scale model creel by four different arrangement of towing, and found out two suitable method, then these two methods were experimented in the sea with full rigged creel, and found the most suitable method out. To decrease the interior current speed of the creel even if it was towed fast, the apron which made by the same webbing of the creel body was enclosed the leading flap of creel, when the interior current speed showed the 35 to 40 percent of towing speed, whereas it showed 50 to 55 percent without apron.

• Journal of Aquaculture
• /
• v.15 no.1
• /
• pp.15-21
• /
• 2002

Two groups of juvenile flounders (90 g/each) were fed on moist pellet feed thrice a day for a period of 8 weeks; the first group, reared in 4 circular (6m $\times$ 0.8 m) tanks (1200 flounders/tank), was fed daily (ED) and the second one on alternate days (EO). There was no significant difference in growth and feed conversion ratio (FCR) between these groups. There was also no difference in chemical composition, except in lipid, which was significantly higher (4.1%) in the ED group than the EO group (3.4%). Food intake and gain in the whole body nitrogen (N) were higher in the ED group but there was no significant difference between these groups in N retention; they excreted almost equal amount (114 vs 112 g) of N. Although phosphorus intake was significantly different between these groups, the flounders retained equal amount (0.5 g) of P in their body and excreted also equal amount (27.6 vs 26.0 g/kg weight gain) of p. Energy intake (2528 kJ) of the ED group was higher than that (2116 kJ) of the EO group. However, there was no significant difference in their energy retention efficiency. Clearly, alternate day feeding regimen led to more efficient utilization of food by the juvenile flounder.

• Fisheries and Aquatic Sciences
• /
• v.22 no.10
• /
• pp.23.1-23.10
• /
• 2019

Background: Taurine is a conditional essential amino acid for fish. A study was conducted to investigate the compensating effect of supplemental taurine in diets for red seabream (Pagrus major) on impaired growth performance by fish meal (FM) replacement with soybean meal (SM) at low water temperature (14.15 ± 1.95 ℃). Methods: A FM-based diet was considered as a high FM diet and three other experimental diets were formulated to replace FM with SM by 20, 35, or 50% (HFM, SM20, SM35, or SM50, respectively) without taurine and other four diets were formulated by adding 1% taurine to the diets (HFM-T, SM20-T, SM35-T, or SM50-T, respectively). Triplicate groups of fish (108.9 ± 1.58 g/fish) were distributed into 24 polyvinyl circular tanks (215 L) with 20 fish per tank and fed one of the diets to satiation for 20 weeks. Results: Growth performance and feed utilization of red seabream were significantly improved by the dietary taurine supplementation. SM20-T and SM35-T diets increased fish growth that are comparable to HFM diet. Feed intake, feed conversion ratio, and protein efficiency ratio of fish fed SM20-T and SM35-T diets were not significantly different from those of HFM group. Dietary taurine supplementation in each FM replaced group numerically increased innate immunity of the fish. Lysozyme and superoxide dismutase activities were significantly decreased in fish fed SM35, SM50, and SM50-T diets compared to those of fish fed HFM diet while they were not significantly lower in SM20, SM20-T, SM35, and SM35-T groups. Glutathione peroxidase activity was significantly lower in fish group fed SM50 diet while SM50-T group did not significantly lower compared to that of HFM group. The relative expression level of hepatic IGF-1 mRNA was improved in fish fed taurine-supplemented diets compared to their respective SM diets. Conclusions: Growth performance and feed utilization of red seabream can be accelerated or restored by 1% taurine supplementation when they are fed high level of SM up to 35% in diets during low water temperature season.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.201-207
• /
• 1979

The stow net now used in the Yellow Sea, are traditional bag net with the opening held by a lighter upper and a weighted lower beams standing against the current. Such bag net anchored at the bottom are known in many countries, particularly in the estuaries of large rivers, but more rarely in sea fisheries, because they are too much affected by the weather, moreover a permanent strong current is necessary. Some scientists intended to improve this fishing gear, using the shearing devices instead of a lighter upper and a weighted lower beams in order to widen mouth of the stow net however they are unsuccessful. One-fortieth scale model net of the stow net was tested in a circular water tank with an effective volume of $5.67m\times1.76m\times1.00m$ of observing the configuration and tension of the net. Experiments were carried out under the various combination including water velocity, spherical floats and elevating floats with the shearing hoods instead of the upper beam. We found those devices offered a very low resistance per net area to current compared with the spherical floats or upper beam, and had a fairly good shearing power at any velocity and direction of the current. The total resistance (R) of the model net to which shearing hoods and floats are attached can be induced by the following formula under the condition of 0.25m/sec to 0.5m/sec, $$R(kg)=3.11V^{1.54}$$ The height (h) of the improved model net (m-B) is higher than traditional model net(m-A) with upper and lower beams, m-A: h(cm)=89.22-2.42(V-15). $V\geqq15,\;cm/sec$ m-B: h(cm)=89.20-0.78V (V:cm/sec) The catch efficiency of improved model net is 1.5 times traditional model net.