• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.56 no.3
• /
• pp.202-212
• /
• 2020

In order to replace sardine baits for octopus pot, an efficacy experiment to lure with alternative bait (fermented skate or chicken skin in artificial crab or northern clam) pots and sardine pot were conducted in a circular water tank. The soaking time of the sardine bait was divided into two categories: six days or less and seven days or more. The behavioral response of octopus to the artificial bait pots and sardine pot were investigated. In the comparison of the luring effects between pots with fermented skate inside artificial crab or northern clam and sardine pot, the pot with artificial crab + fermented skate had better results than the other pots in the section distribution (31.6%) and the number of times the pot was entered into (20.0%) (p > 0.05). In the comparison of the luring effects between pots with chicken skin inside artificial crab or northern clam and sardine pot, the pot with northern clam + chicken skin had better results than the other pots in the section distribution (22.6%) and number of times the pot was entered into (55.6%) (p < 0.05). The results were also better compared to those of pot with artificial crab + fermented skate. From these results, it seems that in the luring effect aspect, sardine bait can be replaced with artificial bait consisting of chicken skin inside northern clam.

• Geomechanics and Engineering
• /
• v.9 no.4
• /
• pp.415-426
• /
• 2015

Researches have been done to discover ways to strengthen peat soil deposits. In this model study, fibrous peat that is the most compressible types of peat has been reinforced with precast peat columns stabilized with ordinary Portland cement and polypropylene fibres. Rowe cell consolidation tests as well as plate load tests (PLTs) were conducted on various types of test samples to evaluate the strength and deformation of untreated peat and peat reinforced by various types of columns. PLTs were conducted in a specially designed and fabricated circular steel test tank. The compression index ($C_c$) and recompression index ($C_r$) of fibrous peat samples reduced considerably upon use of precast columns. Also, PLT results confirmed the results obtained from Rowe cell tests. Use of polypropylene fibres added to cement further decreased ($C_c$) and ($C_r$) and increased load bearing capacity of untreated peat. Finite element method (FEM) using Plaxis 3D was carried out to evaluate the stress distributions along various types of tested samples and also, to compare the deformations obtained from FEM analysis with the actual maximum deformations found from PLTs. FEM results indicate that most of the induced stresses are taken on the upper portion of tested samples and reach their maximum values below the loading plate. Also, a close agreement was found between actual deformation values obtained from PLTs and values resulted from FEM analysis for various types of tested samples.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.7
• /
• pp.862-872
• /
• 1997

Ice formation in a horizontal circular cylinder has been studied numerically. From the numerical analysis results, it was found that there were three types of freezing pattern and that freezing phenomenon was affected largely by density inversion and cooling rate. The type of freezing pattern largely depends on the secondary flow which is generated by density inversion. When supercooling energy is released before the development of the secondary flow, the annular ice layer grows. If the energy is released when the secondary flow is considerably developed and the supercooled region is removed to the upper half part of the cylinder, an asymmetric ice layer grows. And if the energy is released after perfect development of the secondary flow, instantaneous dendritic ice formation over the full region occurs. Furthermore, this secondary flow was found to have an effect on heat transfer characteristics. The heat transfer rate becomes small at the instant when the secondary flow is generated, but becomes large with the development of the flow. It's concluded that for the facilitation of heat transfer it is desirable to keep water in liquid phase until the secondary flow is perfectly developed. This study gave an instruction of performance improvement of capsule type ice storage tank.

• Journal of computational fluids engineering
• /
• v.10 no.4 s.31
• /
• pp.66-71
• /
• 2005

HANARO, a multi-purpose research reactor, 30 MWth open-tank-in-pool type, is planning to produce a fission moly-99 of radio isotopes, a mother nuclide of Tc-99m, a medical isotope and a target handling tool is under development for loading and unloading it in a circular flow tube (OR-5) of HANARO. A guide tube is extended from the reactor core to the top of the reactor chimney for easily loading the target under a normal operation of the reactor. But active coolant through the core can be quickly raised up to the top of the chimney through the guide tube. The jet flow was suppressed in the guide tube after reducing the inner diameter of a flow restriction orifice installed in the OR-5 flow tube for adding the pressure difference in the flow tube. This paper describes an analytical analysis to calculate the flow distribution in the core of HANARO after suppressing the jet flow of the guide tube. As results, it was confirmed through the analysis results that the flow distribution in the core of HANARO were not adversely affected.

• Fisheries and Aquatic Sciences
• /
• v.14 no.2
• /
• pp.130-137
• /
• 2011

Visual stimuli of nets, which affect fishing selectivity, vary by twine diameter, color, and material under different light conditions and visual geometries. In this study, two cylindrical model codends of two mesh sizes, 28 and 43 mm, were made of high-contrast, dark brown polyethylene (PE) netting twine and low contrast, light-blue polyamid (PA) monofilament twine. Each model codend was filled with juvenile seabream and set in the water channel of a light-blue circular tank under a flow speed 0.8 m/s for 30 min. Light conditions were set to relatively bright, dim, and dark. The resulting retention rates of juvenile seabream were 15-35% lower for the low-contrast codend with PA monofilament than for the high contrast PE twine netting under bright and dim light conditions, while no difference was observed under dark conditions. The effects of mesh size and netting contrast on the retention rate were dependent on the light level, while the retention rate due to netting contrast was independent of mesh size. Therefore, low-contrast nets in the codend could help to reduce juvenile bycatch by disturbing the orderly optomotor response.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.14-21
• /
• 1999

As an effective means to convey crushed materials from seabed to onboard ship and to raise hazardous or abrasive liquids, air-lift pump provides a reliable mechanism due to its simple configuration and easy-to-operate principle. The present study is focused on investigation of related performance by the analysis program based on the gas-liquid two-phase flow in circular pipes. The program covers pump operating in isothermal and vertical two-phase flow with Newtonian liquids. It is summarized as important result that an optimum air mass flow rate exists for the maximum lifted liquid mass flow rate in terms of a given submergence rates. The comparison between riser performance of the conveyed liquid flow rate calculated by the computer program and measured data with large scale air lift pump system constructed in 200 meter depth vertical tank reveals similar distribution.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.70-73
• /
• 2005

The HANARO, multi-purpose research reactor, 30 MWth open-tank-in-pool type, is planning to produce a fission moly-99 of radio isotopes, a mother nuclide of Tc-99m, a medical isotope and is under developing a target handling tool for loading and unloading it in a circular flow tube (OR-5). A guide tube is extended from the reactor core to the top of the reactor chimney for easily loading the target under the reactor normal operation. But active coolant through the core can be quickly raised up to the top of the chimney through the guide tube. The jet flow was suppressed in the guide tube after reducing the inner diameter of a flow restriction orifice installed in the OR-5 flow tube for adding the pressure difference in the flow tube after unloading the target. This paper describes an analytical analysis to calculate the flow distribution in the core of the HANARO after suppressing the jet flow of the guide tube. As results, it was confirmed through the analysis results that the flow distribution in the core of the HANARO were not adversely affected.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.3
• /
• pp.394-399
• /
• 2011

The effect of intermittent feeding on growth, feed utilization and body composition of subadult olive flounder fed extruded pellet (EP) in suboptimal temperature ($13.5{\pm}2.10^{\circ}C$) was determined. Two hundred twenty five subadult fish averaging 272 g were randomly distributed into fifteen of 300 L circular flow-through tanks (fifteen fish per tank). Five treatments with different days of feeding a week were prepared in triplicate: fish were hand-fed with EP to apparent satiation once a day, seven days a week (7DF), which was used as the control group or consecutive six, five, four and three days a week, for 12 weeks, referred to as 6DF, 5DF, 4DF and 3DF treatments, respectively. Weight gains and specific growth rates of fish in 6DF treatment were higher than those of fish in 7DF, 4DF and 3DF treatments, but not different from those of fish in 5DF treatment. Daily feed intake of fish in 6DF and 7DF treatments was higher than that of fish in 5DF, 4DF and 3DF treatments. Feed efficiency and protein efficiency ratio of fish were not different among treatments. There was no difference in the chemical composition of fish between treatments. Results of this study demonstrated that feeding five days per week could be recommended for subadult olive flounder fed extruded pellet in suboptimal temperature.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.5
• /
• pp.386-392
• /
• 2018

It is necessary to predict hydrodynamic derivatives when assessing the maneuverability of a submarine. The force and moment acting on the vehicle may affect its motion in various modes. Conventionally, the derivatives are determined by performing captive model tests in a towing tank or applying a system identification method to the free running model test. However, a computational fluid dynamics (CFD) method has also become a possible tool to predict the hydrodynamics. In this study, virtual captive model tests for a full-scale submarine were conducted by utilizing a Reynolds-averaged Navier-Stokes solver in ANSYS FLUENT version 18.2. The simulations were carried out at design speed for various modes of motion such as straight forward, drift, angle of attack, deflection of the rudder, circular, and combined motion. The hydrodynamic force and moment acting on the submarine appended rudders and stern stabilizers were then obtained. Finally, hydrodynamic derivatives were determined, and these could be used for evaluating the maneuvering characteristics of the submarine in a further study.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.27-34
• /
• 2020

Use of axisymmetric shell element for the structure increases the efficiency and accuracy in finite element analysis of the interaction between the ground and the structure. This paper derived the force balance equation and the moment balance equation for an axisymmetric shell element based on Kirchhoff's theory. The governing equation for the axial deformation used the isoparametric shape function in the Galerkin formulation, and the governing equation for the shell bending used the higher-order shape function. The developed axisymmetric shell element was combined with Geo-COUS, a geotechnical finite element program for the coupled analysis with the ground. The accuracy of the developed element was confirmed through the example analyses of the circular plate and the liquid storage tank. And the energy balance equation for the axisymmetric shell element is presented.