• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.78-84
• /
• 2008

In this paper, the reconfigurable annular ring slot antenna with circular polarization diversity is proposed for SDMB(Satellite Digital Multimedia Broadcasting) system. The proposed antenna consists of a ring slot with four tuning stubs. Four PIN diodes are attached to switch circular polarization diversity. By switching the diodes ON or OFF, the proposed antenna can be operated either RHCP mode or LHCP mode. The experimental result shows that the proposed antenna has an impedance bandwidth(VSWR${\leq}$2) of 570MHz(2.47-3.04GHz) at LHCP mode, an impedance bandwidth (VSWR${\leq}$2) of 560MHz(2.45-3.01GHz) at RHCP mode, a maximum gai of 3.1dBi at RHCP mode, 4.76dBi at LHCP mode. The 3dB CP bandwidth of about 100MHz at both RHCP and LHCP mode is achieved at the center frequency 2.63GHz. The proposed antenna is suitable for application such as mobile satellite communications, WLAN(Wireless Local Area Networks), and broadband wireless communication systems.

• Structural Engineering and Mechanics
• /
• v.9 no.1
• /
• pp.37-50
• /
• 2000

Very few studies on orthotropic circular disks or rings under diametrical loadings are conducted because of difficulties in treatment. This paper shows analytical solutions and gives the distributions of stresses and displacements by using Lekhnitskii's complex variable method. Several numerical results are shown by graphical representation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.170-176
• /
• 1987

This study is concerned with dynamic characteristics of a circular ring with a concentrated mass attached. The equations of motion are set up and are solved by using Laplace transformation. The ratio of a concentrated mass to the mass of circular ring is used as a parameter. Experiment was performed by employing impulse test and the results show good agreement with those of analysis. The results of this study can be utilized in vibrational analysis of axisymmetric shells with slight asymmetries.

• Steel and Composite Structures
• /
• v.36 no.2
• /
• pp.197-211
• /
• 2020

Application of the steel ring as a type of seismic fuse has been one of the efforts made by researchers in recent years aiming to enhance the ductility of the bracing systems which in turn, possesses various advantages and disadvantages. Accordingly, to alleviate these disadvantages, an innovative bracing system with a diamond scheme equipped with a steel ring is introduced in this paper. In this system, the braces and yielding circular damper act in parallel whose main functionality is to increase ductility, energy absorption and mitigate drawbacks of the existing bracing systems, in which the braces and yielding circular damper act in parallel. To conduct the experimental tests, specimens with three types of rigid, semi-rigid and pinned connections were built and subjected to cyclic loading so that their performance could be analyzed. Promisingly, the results indicate both great applicability and efficiency of the proposed system in energy absorption and ductility. Moreover, it was concluded that as the braces and damper are in parallel, the use of a steel ring with smaller size and thickness would result in higher energy absorption and load-resisting capacity when compared to the other existing systems. Finally, to assess the potential of numerically modeling the proposed system, its finite element model was simulated by ABAQUS software and observed that there is a great agreement between the numerical and experimental results.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.2
• /
• pp.117-124
• /
• 2022

Single-ring circular array antennas can be applied to direction finding systems in order to use nose-section in other purposes, and the interferometry is a proper direction finding method to those systems. We usually make the interferometer baseline long enough to achieve good angular accuracy. However, an interferometer with baseline longer than a half-wavelength has the ambiguity problem. In this paper, we present a novel method for solving the ambiguity problem in interferometry systems. This technique is based on the amplitude comparison method and the space division table, and it can place a target within the angular region in which the ambiguity problem does not occur by roughly estimating direction-of-arrival. The Monte Carlo simulation results show that proposed method can effectively remove the ambiguity problem in the system.

• ETRI Journal
• /
• v.46 no.2
• /
• pp.218-226
• /
• 2024

This paper presents a novel circular fractal ring monopole antenna for ultra-wideband (UWB) hardware with dual band-notched properties. The proposed antenna consists of four crescent-shaped nested rings, a tapered feeding line at the front of the dielectric material, and a semicircular ground plane on the backside. In this design, the nested rings are used both as a radiation element and a band rejection element. The proposed antenna has a bandwidth of 9.03 GHz, which works efficiently in the range of 2.63 GHz-11.66 GHz with the dual notched bands of Worldwide Interoperability for Microwave Access (WiMAX) at 3.15 GHz-3.66 GHz and wireless local area network (WLAN) at 4.9 GHz-5.9 GHz, respectively. The antenna has a compact size of 20 mm × 30 mm × 1 mm (0.177 × 0.265 × 0.0084 λ0) and is implemented using a flame-retardant type 4 (FR4) material. It has a maximum gain of approximately 4 dB in its operating range, and experimental results support the simulation predictions with high accuracy. The findings of this study imply that the designed antenna can be utilized in UWB applications.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.1 s.38
• /
• pp.43-54
• /
• 1999

The divergence connection between steel circular tubes is widely used in such structures as factory facilities, steel circular hollow section truss, and off-shore tower. Steel circular hollow section (SCHS) have close section, and it makes their per-unit production expense higher than open sectioned products like L-shape, H-shape steels, but the sectional resistance of SCHS against vertical compression and torsion is very high. Despite the structural merits of SCHS, however, many engineers dislike to use them in their design because of uncertainty regarding the stress distribution and deformation behavior at their connections. Therefore, this thesis dealt with X-type connections, the most common forms of connection, and studied their load-deformation relationship. It observed how to show the load-deformation relationship at steel circular tube connections according to the diameter-thickness ratio (D/T) of the chord and diameter of branch-diameter of chord ratio (d/D) and suggested prediction yield load using by ring analysis method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.609-617
• /
• 2002

A three-dimensional(3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of thick, circular rings with isosceles trapezoidal and triangular cross-sections. Displacement components u/sub s/, u/sub z/, and u/sub θin the meridional, normal, and circumferential directions, respectively, are taken to be sinusoidal in time, periodic in θ, and algebraic polynomials in the ψ and z directions. Potential(strain) and kinetic energies of the circular ring are formulated, and upper bound values of the frequencies we obtained by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Novel numerical results are presented for the circular rings with isosceles trapezoidal and equilateral triangular cross-sections having completely free boundaries. Convergence to four-digit exactitude is demonstrated for the first five frequencies of the rings. The method is applicable to thin rings, as well as thick and very thick ones.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.6
• /
• pp.652-658
• /
• 2004

In this paper, we report the numerical and experimental solutions of the axi-symmetric flows in the axial plane driven by an impingement of fluid from the bottom wall of a circular cylinder. We managed to visualize successfully the flow pattern shown on the vertical plane through the container axis. The numerical results are shown to compare well with the experimental results for the case of infinity Rossby number. The satisfactory agreement between the two results was possible when in the numerics the free surface was treated as a solid wall so that a no-slip condition was applied on the surface. The numerical solutions reveal that inertial oscillation plays an important role at small Rossby numbers, or at a larger background rotation.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.2
• /
• pp.24-29
• /
• 2002

A study for the circularity of machine tool is classified into two ways. One is to measure the circularity of machine tool by a existing measuring device. The other is to measure the circularity by remodeling the existing measuring device. We will improve on measurement of circularity using circular test method by a two-dimensional probe and a master ring for machining tools and investigate influence of trigger method, acceleration data sampling.