• Steel and Composite Structures
• /
• 제48권3호
• /
• pp.293-303
• /
• 2023

In this paper, geometrically nonlinear free vibration analysis of Mindlin viscoelastic plates with various geometrical and material properties is studied based on the Von-Karman assumptions. A novel solution is proposed in which the nonlinear frequencies of time-dependent plates are predicted according to the nonlinear frequencies of plates not dependent on time. This method greatly reduces the cost of calculations. The viscoelastic properties obey the Boltzmann integral law with constant bulk modulus. The SHPC meshfree method is employed for spatial discretization. The Laplace transformation is used to convert equations from the time domain to the Laplace domain and vice versa. Solving the nonlinear complex eigenvalue problem in the Laplace-Carson domain numerically, the nonlinear frequencies, the nonlinear viscous damping frequencies, and the nonlinear damping ratios are verified and calculated for rectangular, skew, trapezoidal and circular plates with different boundary conditions and different material properties.

• Geomechanics and Engineering
• /
• 제34권4호
• /
• pp.425-435
• /
• 2023

Granite and marble are widely produced and utilized in the construction industry, resulting in significant waste production. It is essential to manage this waste appropriately and repurpose it in recycling processes to ensure sustainability. The utilization of waste materials such as marble and granite waste (MGW) has become increasingly important in geotechnical engineering to improve the physical and mechanical properties of weak soils. This study investigated the applicability of utilizing MGW and cement (C)-MGW mixtures to improve clayey soil. A series of model plate loading tests were carried out in a specialized circular test tank to assess the influence of MGW and C-MGW mixing ratios on clayey soil samples. The samples were prepared by blending MGW and C-MGW in predetermined proportions. It is found that the bearing capacity of clay soil increased by approximately 71% when using MGW and C additives. Moreover, the consolidated settlement values of the clay soil decreased up to 6 times compared to the additive-free case.

• Coupled systems mechanics
• /
• 제13권3호
• /
• pp.231-245
• /
• 2024

In the present work, a microelogated thermoelastic model based on Lord-Shulman (1967) and Green-Lindsay (1972) theories of thermoelasticity has been constructed. The governing equations for the simulated model are converted into two-dimensional case and made dimensionless for further simplification. Laplace and Hankel transforms followed by eigen value approach has been employed to solve the problem. The use of eigen value approach hasthe advantage of finding the solution of governing equationsin matrix form notations. This approach is straight forward and convenient for numerical computation and avoids the complicate nature of the problem. The components of displacement,stress and temperature distribution are obtained in the transformed domain. Numerical inversion techniques have been used to invert the resulting quantities in the physical domain. Graphical representation of the resulting quantities for describing the effect of microelongation are presented. A special case is also deduced from the present investigation. The problem find application in many engineering problems like thick-walled pressure vesselsuch as a nuclear containment vessel, a cylindricalroller etc.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1417-1425
• /
• 1990

본 연구에서는 취성재료인 유리판이 충격을 받을 때 생기는 크랙패턴 특히, 콘 크랙의 발생 현상을 이론적으로 규명하여 취성재료의 충격파괴방지에 도움이 되게 하고져 하였으며, 판두께방향의 변형을 고려한 제1보에서의 삼차원 동탄성이론에 의한 응력해석방법을 이용하여 충돌점 및 충돌점근방에서의 변형율분포를 해석하였다. 또 한 고속 및 자유낙하 충격시험을 행하여 얻은 크랙의 패턴과 본 이론해석 결과인 변형 률 분포의 수치계산 결과와 비교함으로써 콘 크랙의 발생현상을 3차원 동탄성이론을 이용한 본 충격응력해석 방법에 의한 규명하였다. 변형률 분포의 해석은 국부변형을 고려한 Hertz의 접촉이론과 Lagrange의 고전판 이론을 이용하여 구한 충격하중계수의 크기에 따라 충격하중의 함수근사식을 바꿔가며 해석하였으며 충돌점으로 부터 0.1cm 간격으로 5cm범위까지를 해석하였다.

• 한국강구조학회 논문집
• /
• 제21권6호
• /
• pp.575-583
• /
• 2009

최근 건물이 고층화 됨에 따라 건물의 중량감소와 시공의 효율성 확보를 위해 기존 S, RC, SRC 이외에 새로운 구조시스템이 적용되고 있으며, 그중에서도 CFT 구조는 우수한 구조성능과 시공성으로 많은 건설현장에 적용되어 왔다. CFT 구조는 접합부 구성시 보 플랜지 하중을 기둥과 반대편 보에 원활히 전달하기 위한 다이아그램이 필요하며 특히 기둥 좌우에 춤이 다른 보가 접합될 때 보의 하부 플랜지 하중전달을 위한 다이아프램 구성과 콘크리트 충전성 확보에 어려움이 있었다. 본 연구에서는 하부 보 플랜지 하중을 기둥에 원활히 전달하기 위해 CFT 기둥 내부에 유공판을 세로로 접합하는 형식의 접합상세를 제안하였다. 이 접합형식은 CFT 기둥 내부에 콘크리트가 충전될 때 콘크리트가 내부 유공판의 구멍을 관통하여 채워짐으로써 보 플랜지 하중전달에 콘크리트의 앵커효과를 이용하는 방법이며 유공판이 수직으로 설치됨으로써 콘크리트 충전성도 향상시킬 수 있다. 제안된 접합부의 구조거동분석을 위해서 내부유공판의 설치방향, 콘크리트의 충전 유/무, 내부유공판의 두께, 전단구멍의 개수등을 변수로하여 5개의 실험체를 제작하고 실험체의 실험적연구를 진행하였다.

• 대한토목학회논문집
• /
• 제43권5호
• /
• pp.577-585
• /
• 2023

횡비틀림 좌굴은 가설 중 붕괴 사고 등의 안전사고를 유발할 수 있기 때문에 설계단계에서 좌굴에 대한 정확한 안전성 검토가 이루어져야 한다. 횡비틀림 좌굴을 방지하기 위한 방안으로 단부 보강을 통해 거더의 뒤틀림 강도 증가시키거나 크로스 프레임 설치를 통해 비지지길이를 감소하는 방법 등이 있다. 크로스 프레임은 바닥판 합성 이후 구조적 역할이 적은 반면 재료비와 설치비에 따른 인건비 비중이 매우 크며, 용접부의 피로 균열로 인해 유지관리 성능을 감소시키는 요인으로 작용할 수 있다. 콘크리트 충전 반원기둥보강재를 통한 단부 보강 공법은 반원기둥 형태의 보강재를 통해 플레이트 거더의 단부를 보강하는 공법으로 거더 자체의 뒤틀림 강성을 증가시켜 횡비틀림 좌굴 강도를 증가시킨다. 이 연구에서는 콘크리트 충전 반원기둥보강재가 적용된 플레이트 거더의 뒤틀림 강도 증가로 인한 횡비틀림 좌굴 강도의 영향을 검토하기 위하여 설계식에 의한 결과와 유한요소해석의 결과를 비교하였고 실물재하실험을 통해 검증하였다. 설계식은 경계조건의 구속과 관련된 유효길이계수를 적용하고 있는 Eurocode의 설계식을 사용하였으며 결과를 검증하기 위하여다양한 단면의 유한요소해석을 수행하였다. 이후 횡방향 하중을 통해 뒤틀림을 받는 거더의 실물재하실험을 수행하여 콘크리트 충전 반원기둥보강재의 성능을 확인하였다. 그 결과 CFHPS가 적용된 플레이트 거더는 기존 판형 보강재가 적용된 플레이트 거더와 비교하여 뒤틀림 강도가 증가하였으며 그로 인해 횡비틀림 좌굴 강도가 증가하는 것으로 확인되었다.

• 천문학논총
• /
• 제36권3호
• /
• pp.65-78
• /
• 2021

Jagyeokru, an automatic striking water clock described in the Sejong Sillok (Veritable Records of King Sejong) is essentially composed of a water quantity control device and a time-signal device, with the former controlling the amount or the flow rate of water and the latter automatically informing the time based on the former. What connects these two parts is a signal generating device or a power transmission device called the 'Jujeon' system, which includes a copper rod on the float and ball-racked scheduled plates. The copper products excavated under Gongpyeong-dong in Seoul include a lot of broken plate pieces and cylinder-like devices. If some plate pieces are put together, a large square plate with circular holes located in a zigzag can be completed, and at the upper right of it is carved 'the first scheduled plate (一箭).' Cylinder-like devices generally 3.8 cm in diameter are able to release a ball, and have a ginkgo leaf-like screen fixed on the inner axis and a bird-shaped hook of which the leg fixes another axis and the beak attaches to the leaf side. The lateral view of this cylinder-like device appears like a trapezoid and mounts an iron ball. The function of releasing a ball agrees with the description of Borugak Pavilion, where Jagyeokru was installed, written by Kim Don (1385 ~ 1440). The other accounts of Borugak Pavilion's and Heumgyeonggak Pavilion's water clocks describe these copper plates and ball releasing devices as the 'Jujeon' system. According to the description of Borugak Pavilion, a square wooden column has copper plates on the left and right sides the same height as the column, and the left copper plate has 12 drilled holes to keep the time of a 12 double-hours. Meanwhile, the right plate has 25 holes which represent seasonal night 5-hours (Kyeong) and their 5-subhours (Jeom), not 12 hours. There are 11 scheduled plates for seasonal night 5-hours made with copper, which are made to be attached or detached as the season. In accordance with Nujutongui (manual for the operation of the yardstick for the clepsydra), the first scheduled plate for the night is used from the winter solstice (冬至) to 2 days after Daehan (大寒), and from 4 days before Soseol (小雪) to a day before the winter solstice. Besides the first scheduled plate, we confirm discovering a third scheduled plate and a sixth scheduled plate among the excavated copper materials based on the spacing between holes. On the other hand, the width of the scheduled plate is different for these artifacts, measured as 144 mm compared to the description of the Borugak Pavilion, which is recorded as 51 mm. From this perspective, they may be the scheduled plates for the Heumgyeonggak Ongru made in 1438 (or 1554) or for the new Fortress Pavilion installed in Changdeokgung palace completed in 1536 (the 31^st year of the reign of King Jungjong) in the early Joseon dynasty. This study presents the concept of the scheduled plates described in the literature, including their new operating mechanism. In addition, a detailed model of 11 scheduled plates is designed from the records and on the excavated relics. It is expected that this study will aid in efforts to restore and reconstruct the automatic water clocks of the early Joseon dynasty.

• 한국전산구조공학회논문집
• /
• 제24권1호
• /
• pp.55-60
• /
• 2011

본 논문에서는 NURBS의 기저함수를 이용하는 등기하 해석을 선형 탄성 문제에 적용하였다. 등기하 해석의 목적은 기하학적 모델링 (CAD)와 수치적 해석 (CAE)를 통합하는 것인데, 이는 계산 망으로써 NURBS에 의한 기하학적 모델링 결과를 직접 이용해서 이룰 수 있다. NURBS 곡면은 조정점과 노트 벡터들을 이용하여 정확한 기하학적 형상을 표현할 수 있으며, 또한 요소의 정밀화 과정이 상대적으로 용이하다는 장점이 있다. 본 연구를 통해 개발된 컴퓨터 코드의 정당성을 보이기 위해 비교적 단순한 형태의 두 가지 구조모델에 적용하였다 ; 1) 균일 내압을 받는 실린더, 2) 균일 인장력이 작용하는 중앙에 구멍이 있는 정사각형 판. 이 두 모델은 정해가 있는 경우로서 절점을 추가하는 h-정밀화와 기저함수의 차수를 증가하는 p-정밀화에 의한 등기하 해석법을 적용한 근사해의 수렴성을 분석하였다.

• 한국재료학회지
• /
• 제22권9호
• /
• pp.482-488
• /
• 2012

To fabricate a precise micro metal mold, the electrochemical etching process has been researched. We investigated the electrochemical etching process numerically and experimentally to determine the etching tendency of the process, focusing on the current density, which is a major parameter of the process. The finite element method, a kind of numerical analysis, was used to determine the current density distribution on the workpiece. Stainless steel(SS304) substrate with various sized square and circular array patterns as an anode and copper(Cu) plate as a cathode were used for the electrochemical experiments. A mixture of $H_2SO_4$, $H_3PO_4$, and DIW was used as an electrolyte. In this paper, comparison of the results from the experiment and the numerical simulation is presented, including the current density distribution and line profile from the simulation, and the etching profile and surface morphology from the experiment. Etching profile and surface morphology were characterized using a 3D-profiler and FE-SEM measurement. From a comparison of the data, it was confirmed that the current density distribution and the line profile of the simulation were similar to the surface morphology and the etching profile of the experiment, respectively. The current density is more concentrated at the vertex of the square pattern and circumference of the circular pattern. And, the depth of the etched area is proportional to the current density.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.127-130
• /
• 2004

For the quality control of the industrial products, an automatic hole measuring system has been developed. The measurement device allows X-Y movement due to contact forces between a hole and its own circular cone and the device is attached to an industrial robot. Its measurement accuracy is about 0.04mm. This movement of the plate is measured by two LVDT sensor system. But this system using the LVDT sensors is restricted by high cost and precision of measurement and correspondence of environment so particularly, a vision system with CCD-Camera is discussed in this paper for the above mentioned purpose. The device consists of two of two links jointed with hinge pins basically and, they guarantee free movement of the touch prove attached on the second link in the same plane. These links are returned to home position by the spring plungers automatically after each process for the next one. On the surface of the touch prove, it has a circular white mark for camera recognition. The system detect and notify the center coordinate of capture mark image through the image processing. Its measuring accuracy has been proved to be about $\pm$0.01mm through the repeated implementation over 200 times. This technique will shows the advantage of touch-indirect image capture idea using cone-shaped touch prove in various symmetrical shaped holes particulary, like tapped holes, chamfered holes, etc As a result, we attained our object in a view of the accuracy, economical efficiency, and functionality