• 대한기계학회논문집B
• /
• 제27권8호
• /
• pp.1174-1181
• /
• 2003

The flow around a circular cylinder was controlled by attaching O-rings to reduce drag force acting on the cylinder. Four experimental models were tested in this study; one smooth cylinder of diameter D (D=60mm) and three cylinders fitted with O-rings of diameters d=0.0167 D, 0.05D and 0.067 D with pitches of PPD=2D, 1D, 0.5D and 0.25D. The drag force, mean velocity and turbulence Intensity profiles in the near wake behind the cylinders were measured for Reynolds numbers based on the cylinder diameter in the range of Re$_{D}$=7.8$\times$10$^3$~1.2$\times$10$^{5}$ . At Re$_{D}$=1.2$\times$10$^{5}$ , the cylinder fitted with O-rings of d=0.0167D in a pitch interval of 0.25D shows the maximum drag reduction of about 5.4%, compared that with the smooth cylinder. The drag reduction effect of O-rings of d=0.067D is not so high. For O-ring circulars, as the Reynolds number increases, the peak location of turbulence intensity shifts downstream and the peak magnitude is decreased. Flow field around the cylinders was visualized using a smoke-wire technique to see the flow structure qualitatively. The size of vortices and vortex formation region formed behind the O-ring cylinders are smaller, compared with the smooth cylinder.der.

• 한국전자통신학회논문지
• /
• 제8권9호
• /
• pp.1285-1291
• /
• 2013

본 논문에서는 광대역 특성을 갖는 이중 원형 링 모노폴 안테나를 설계 및 제작 하였다. 제안된 안테나는 평면형 모노폴 형태를 기본으로 이중 원형 링과 접지면으로 구성되어 있으며 광대역 특성을 갖도록 설계하였다. 최적화된 파라메타을 얻기 위해 상용 툴(HFSS)을 사용하여 시뮬레이션 하였으며 안테나 성능에 민감하게 적용받는 파라메타를 찾아내서 최적화된 수치를 얻었다. 얻어진 최적화된 수치를 사용하여 제안된 안테나를 제작하였다. 제작된 안테나는 광대역 특성을 갖는 대역에서 반사손실, 이득, 방사패턴의 특성을 측정하였다. 측정결과, -10dB을 기준으로 4,530 MHz(2,510-7,040 MHz)의 광대역 특성을 얻었으며 주어진 이득은 최대이득 0.71~3.38 dBi 그리고 평균이득 -3.85~0.3 dBi을 얻었다. 측정된 방사패턴의 경우, 전체적으로 E면은 전방향성의 방사패턴을 갖고 있으면 H면은 다이폴 안테나의 전형적인 특성을 나타내고 있다

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.17-17
• /
• 1998

Synchrotron radiation is produced when charged particles moving with relativistic velocities a are accelerated - for example, deflected by the bending magnets which guide the electron or p positrons in circular accelerators or storage rings. By using special focusing magnetic lattices i in the particle accelerators it is possible to make the dimensions of the particle beam very small with a hi맹 charge density which results in a light source with high b디lIiance. Synchrotron light h has important properties which make it ideal for a wide range of investigations in surface s science. The fact that the spectrum of electromagnetic radiation emitted in a bending magnet e extends in a continuum from the 얹r infra red region to hard x-rays means that it is id않I for a v variety of spectroscopic studies. Since there are no convenient lasers, or other really bright l light sources, in the vacuum ultraviolet and soft x-ray re.밍ons the development of synchrotron r radiation has enabled enormous advances to be made in this di펌C비t spectr따 re밍on. P Polarization-dependent measurements, for ex없nple ellipsometry or circular dichroism studies a are possible because the radiation has a well-defined polarization - linear in the plane of orbit w with additional right-circular, or left-circular, components for emission an생es above, or below, t the horizontal, respectively. Since the synchrotron light is emitted from a bunch of charge c circulating in a ring the light is emitted with a well-defined time structure with a short flash of l light every time a bunch passes an exit port. The time structure depends on the size of the ring a and the number and sequence of filling of the bunches. A pulsed light source enables time¬r resolved studies to be performed which provide direct information on the lifetimes and decay m modes of excited states and in addition opens up the possibility of using time of flight t techniques for spectroscopic studies. The fact that synchrotron radiation is produced in a clean u ultrahi야 vacuum environment is of gr않t importance for surce science studies. The current t비rd generation synchrotron light sources provide exceptionally high baliance and stability a and open up possibilities for experiments which would have been inconceivable only a short time ago.

• 한국전자파학회논문지
• /
• 제18권3호
• /
• pp.315-322
• /
• 2007

본 논문에서는 UHF RFID Reader 장치에서 고주파 신호 송신을 위한 발진기형 능동 안테나를 설계 제작하였다. 능동 안테나의 방사체로는 임피던스 정합이 용이하면서 좌선 원형 편파 특성을 갖는 소형화된 사각형 링 패치 안테나가 제안되었다. 이를 기반으로 링 패치 내부의 빈 공간에 RF증폭 회로를 위치시켜 사각형 링 패치와 상호연결하여 궤환 구조를 형성함으로써 발진 회로를 구성하였다. 발진 중심 주파수는 915 MHz이며 링 패치는 발진기의 공진기로 활용하였다. 실험 결과, 임피던스 대역폭 29 MHz, 3 dB 축비 대역폭 20 MHz, 3 dB 빔폭 $85^{\circ}$, 그리고 유효 방사 전력을 8.8 dBm을 얻었다.

• Structural Engineering and Mechanics
• /
• 제38권6호
• /
• pp.753-765
• /
• 2011

The radial vibration behaviors of a circular cylindrical composite piezoelectric transducer (CPT) are investigated. The CPT is composed of a piezoelectric ring polarized in the radial direction and an elastic ring graded in power-law variation form along the radial direction. The governing equations for plane stress state problem under the harmonic excitation are derived and the exact solutions for both piezoelectric and functionally graded elastic rings are obtained. The characteristic equations for resonant and anti-resonant frequencies are established. The presented methodology is fit to carry out the parametric investigation for composite piezoelectric transducers (CPTs) with arbitrary thickness in radial direction. With the aid of numerical analysis, the relationship between the radial vibration behaviors of the cylindrical CPT and the material inhomogeneity index of the functionally graded elastic ring as well as the geometric parameters of the CPTs are illustrated and some important features are reported.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.245-252
• /
• 2018

본 논문에서는 CSRR구조의 대역제거특성을 이용하여 정지위성용 이중대역 원편파안테나를 설계하였다. 정지위성의 송신(1525~1559MHz)과 수신주파수(1626.5~1660.5MHz)사이에 대역저지 특성을 갖기위하여 사각 CSRR (Complementary split ring resonator)을 안테나의 그라운드면에 식각하였으며 패치안테나의 모서리 부분을 절삭하여 원편파 특성을 얻었다. 패치안테나의 공진주파수는 CSRR의 크기와 위치에 의해 달라지며 시뮬레이션과 측정을 통하여 원편파 특성을 확인하였다. 측정결과 송신과 수신 주파수대역에서 약 0.2dB와 1.5dB의 이득을 얻었다.

• Current Optics and Photonics
• /
• 제2권3호
• /
• pp.233-240
• /
• 2018

We proposed a two-mode fiber (TMF) design that can effectively reduce the mode overlap between $LP_{01}$ and $LP_{11}$ modes by using a W-shaped index profile core structure, which is a primary concern in uncoupled mode division multiplexing (MDM). TMF has a three-layered core structure; central circular core, inner cladding, and outer ring core. We confirmed that in an optimal structure the $LP_{01}$ mode was highly confined to the central core while the $LP_{11}$ mode was guided along the outer ring core to result in a minimum overlap integral. We used a full-vectorial finite element method to estimate effective index, differential group delay (DGD), confinement loss, chromatic dispersion, and mode overlap controlling the parameters of the W-shaped structure. The optimized W-profile fiber provided optical characteristics within the ITU-T recommended standards over the entire C+L band.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.719-722
• /
• 2002

This paper reports the characteristics of a bidirectional antenna by using a planar array of a probe excited circular ring. The element of a bidirectional antenna is first designed to achieve the maximum directivity. The directivity can be further increased by arranging these elements to form the linear array. There are two types of linear array to be investigated i.e., on axis and off axis arrangement. On-axis linear array yields better directivity than off-axis linear array. Therefore, this orientation is further used to form the planar array. The radiation characteristics of this optimum planar array are rigorously reported. The proposed structure is very useful to extend the distance between the base station in PCT system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.253-256
• /
• 1996

Stiffened panels are very frequently used for body structures of automobiles, air-crafts, submarines, etc., to suppress the vibration level. Swaging technique is the modification of the configuration of panel itself, and this is prefered to rib-like stiffeners because it does not change the total weight of structure. In this paper, the transmissibility of vibratory power through swage is investigated, where the swage is modeled as an incomplete circular ring, utilizing the well-known transfer matrix method. The power transmission and reflection coefficients of swaged panel are estimated and compared with experimental results.

• 대한기계학회논문집A
• /
• 제37권4호
• /
• pp.537-545
• /
• 2013

금속씰의 탄성복원력은 기밀성능을 결정하는 매우 중요한 요소이다. 본 연구는 장시간 운전조건에서 기밀성능을 유지할 수 있는 금속오링씰의 구조, 즉 탄성복원력이 우수한 구조를 얻기 위하여 컴플라이언트 메커니즘 위상최적화법을 도입하였다. 진화구조최적화법의 위상최적화 알고리듬이 사용되었으며, 강성 및 유연성을 동시에 고려하는 두 가지 종류의 목적함수가 사용되었다. 금속오링씰의 외형을 고려하여 원형의 최적화 설계영역이 고려되었으며 최적화 결과로 나타난 위상의 탄성복원력은 상용품의 탄성복원력과 비교되었다.