• Journal of electromagnetic engineering and science
• /
• v.13 no.3
• /
• pp.178-185
• /
• 2013

This paper introduces a high-efficiency, high-gain, broadband quasi-Yagi antenna, and its four-element array for use in 60-GHz wireless communications. The antenna was fed by a microstrip-to-slotline transition consisting of a curved microstripline and a circular slot to allow broadband characteristics. A corrugated ground plane was employed as a reflector to improve the gains in the low-frequency region of the operation bandwidth, and consequently, to reduce variation. The single antenna yielded an impedance bandwidth of 49 to 69 GHz for $|S_{11}|$ <-10dB and a gain of >12.0 dBi while the array exhibited a bandwidth of 52 to 68 GHz and a gain greater than 15.0 dBi. Both proposed designs had small gain variations (${\pm}0.5$ dBi) and high radiation efficiency (>95%) in the 60-GHz bands. The features of the proposed antenna were validated by designing, fabricating, and testing a scaled-up configuration of the single antenna at the 15-GHz band. The measurements resulted in an impedance bandwidth of 13.0 to 17.5 GHz for $|S_{11}|$ <-10dB, a gain of 10.1 to 13.2 dBi, and radiation efficiency in excess of 88% within this bandwidth. Additionally, the 15-GHz antenna yielded quite symmetric radiation profiles in both E- and H-planes, with a high front-to-back ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1676-1682
• /
• 1999

In this paper, the double circular array microstrip patch antenna was designed to minimize the side lobe in which a cooperate feeding network was used to supply the same amplitude and equi-phase to each antenna element. Eight microstirip patch antenna(MPA) elements were arrayed with $45^{\circ}$ interval in the inner circle and the outer circle respectively. The simulation results showed that when the radii of the inner circle and the outer circle were 0.7 $\lambda$0 and 1.45 $\lambda$0, the side lobes of beam pattern were minimized. As the results of the measurements, the return loss of the designed antenna was -14.5[dB] at 11.75[GHz] in the input terminal. When the level of the main lobe was normalized at 0[dB], those of the first and the second side lobe were -18[dB] and -26[dB] respectively. The radiation patterns agree well with the simulated patterns.

• International Journal of Computer Science & Network Security
• /
• v.21 no.3
• /
• pp.55-59
• /
• 2021

Generating electromagnetic waves with Orbital Angular Momentum (OAM) properties is a fast-growing research subject in both radio and optics. This paper describes the generation of OAM carrying waves using a circular array of rectangular planar monopole antennas. The proposed design combines simplicity, compactness, and most importantly very wideband of operating frequencies (about 20-160 GHz, bandwidth ratio about 1:8) which makes it suitable for future applications.

• Journal of electromagnetic engineering and science
• /
• v.14 no.3
• /
• pp.306-313
• /
• 2014

A Fabry-Perot resonator cavity antenna for Ku-band application is presented in this paper. The Fabry-Perot cavity is formed by a ground plane and a frequency selective surface (FSS) made of a circular hole array. The cavity resonance is excited by a single-feed microstrip patch located inside the cavity. The measured results show that the proposed antenna has an impedance bandwidth of approximately 13% ($VSWR{\leq}2$) and a 3-dB gain bandwidth of approximately 7%. The antenna produces a maximum gain of 18.5 dBi and good radiation patterns over the entire 3-dB gain bandwidth. The antenna's very thin profile, high directivity, and single excitation feed make it promising for use in wireless and satellite communication applications in a Ku-band frequency.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.389-393
• /
• 2000

마이크로스트립 안테나는 다양한 장점에 의해 배열 안테나로서 각광을 받고 있다. 하지만 표면 전파에 의한 음영각 발생 및 이에 따른 조향각이 제한된다는 단점을 가지고 있다. 본 논문은 이러한 문제점들을 해결하기 위하여 radome이 올려진 cavity-backed 단일 방사 소자들을 showed array 구조론 통해 해결하는데 초점을 두었으며, 알고리즘에 대한 설명과 본 구조를 이용하여 실제 성능의 개선을 가져 올 수 있음을 보이고자 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.125-130
• /
• 2011

In this paper, SIW-based $2{\times}4$ uniform array antenna with a sequentially fed 8-way power divider with an equal division characteristic is proposed for an application of X-band satellite communication. In particular, sequential feeding structures with a progressive phase difference of 90 degrees between the nearest elements have been suggested to protect the cancellation of electric fields due to the array alignments and to enhance the purity of RHCP(Right-Handed Circular Polarization). The obtained results according to the return loss bandwidth, RHCP antenna gain, axial ratio bandwidth are 760 MHz ranging from 7.90 to 8.66 GHz under the criterion of less than -10 dB, 14.3 dBic at 8.3 GHz, and 600 MHz from 8.15 to 8.75 GHz, respectively. In addition, it is observed that the equal-division characteristic of SIW-based 8-way power divider is approximately -9.2 dB in all ports.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.712-720
• /
• 2003

In this paper, a multi-layered metallic disk array structure(MDAS) excited by cross-dipole elements was proposed for efficiently shaping of flat-topped element patterns(FTEP) with circular polarization. The MDAS excited by cross-dipole elements has advantages to decrease in volume and weight of an overall array antenna and so, it is appropriate for the FTEP applications of a ralativlely low frequency band. In order to verify the effectness of this structure, the MDAS breadboard operated at X-band(7.9 ∼ 8.4 GHz) was fabricated, and its design parameters were experimentally optimized on the basis of the previous design experience. The experimental results were shown that the MDAS could shape good FTEPs of ${\pm}$20$^{\circ}$beam width at least within a 6.1 % frequency band.

• Journal of Advanced Navigation Technology
• /
• v.6 no.3
• /
• pp.181-187
• /
• 2002

In this paper, we propose a resolution enhancement method for estimating direction-of-arrival(DOA) of narrowband incoherent signals incident on a general array. The resolution of DOA algorithm is dependent on the aperture size of antenna array. But it is very impractical to increase the physical size of antenna array in real environment. We propose the method that improves resolution performance by virtually expanding the sensor spacing of original antenna array and then averaging the spatial spectrum of each virtual array which has a different aperture size. Superior resolution capabilities achieved with this method are shown by simulation results in comparison with the standard MUSIC for incoherent signals incident on a uniform circular array.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.158-165
• /
• 2007

In this paper, the circularly polarized $4{\times}4$ array antenna is proposed for the X-band. A single antenna consists of square patch and unequal cross-aperture coupled feeding. The RHCP(Right Handed Circularly Polarization) is generated by unequal cross-aperture coupled feeding. By reducing space among elements of way antenna from 0.8 ${\lambda}_0$ to 0.45 ${\lambda}_0$, the mounting area of array antenna is miniaturized. The $2{\times}2$ array antenna is designed using sequential rotation feeding network. The good level of gain, axial ratio, and impedance bandwidth are achieved. The $4{\times}4$ array antenna is extended by ${\lambda}/4$ transformer and T-junction power divider. The simulated maximum radiation gain is 15.09 dBi at 10 GHz. The simulated 3 dB Axial Ratio bandwidth is from 9.05 to 10.4 GHz(13.5%). Also the measured impedance bandwidth($VSWR{\leq}2$) of manufactured $4{\times}4$ array antenna is from 8.45 to 11.84 GHz(33.9%). The measured maximum radiation gain is 11.10 dBi at 10 GHz. The measured 3 dB Axial Ratio bandwidth is from 9.42 to 10.47 GHz(10.5%).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.355-365
• /
• 2017

In this paper, we propose the design of a dual-band GPS antenna using in-direct feeding pads. The antenna consists of an upper patch for the GPS L1 band, a lower patch for the GPS L2 band, and two pads on the middle layer for feeding the two radiating patches. A hybrid chip coupler with a phase difference of $90^{\circ}$ is employed at the two feeding ports for achieving a broad circular polarization (CP) bandwidth. The proposed antenna shows bore-sight gains of 3.0 dBic(L1) and 5.1 dBic(L2), and axial ratios of 3.3 dB(L1) and 0.3 dB(L2) by measurement. The active element patterns of the fabricated array with 7 elements show bore-sight gains of -0.4 dBic (L1) and -2.4 dBic(L2), respectively. It proves that the proposed antenna structure is suitable for use in GPS array applications.