• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.176-184
• /
• 1996

To overcome the drawbacks of conventional LDMOSFETs, we propose RESURF EDMOSFETs which can be adapted in varous circuit applications, be driven without charge pumping circuity and thowe threshold voltage can be adjusted. The devices have the diffused drift region formed by a high tmperature process before the gate oxidaton. After the polysilicon gate electrode formation, a fraction of the drift region around the gate edge is opened for supplemental self-aligned ion implantation to obtain self-aligned drift region. This leads to a shorter gate length and desirable drift region junction contour under the gate edge for minimum specific-on-resistance. In additon, a and maximize the breakdown voltage. Also, by biasing the metal field plate, we can reduce the specific-on-resistance further. The devices are optimized by using the TSUPREM-4 process simulator and the MEDICI device simulator. The optimized devices have the breakdwon voltage and the specific-on-resistance of 101.5V and 1.14m${\Omega}{\cdot}cm^{2}$, respectively for n-channel RESURF EDMOSFET, and 98V and 2.75m.ohm..cm$^{2}$ respectively for p-channel RESURF EDMOSFET. To check the validity of the simulations, we fabricated n-channel EDMOSFETs and confirmed the measured breakdown voltage of 97V and the specific-on-resistance of 1.28m${\Omega}{\cdot}cm^{2}$. These results are superior to those of any other reported power devices for smart power IC applications.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.412-418
• /
• 2002

In this paper, the authors present the simulation results and the experimental considerations on the effects of the effects of the VCO oscillation characteristics caused by varying the length of the MSL and the composition capacitance of LC resonation circuity. Simulation was accomplished by nonlinear RF circuit simulator for designing and analyzing the RF characteristis of VCO. The samples with 3 different MSL lengths of which the length is 140mil, 280mil and 560mil respectively were fabricated by screen printing process. The oscillation frequency of each sample(VCO) was tuned to UHF band (750MHz~900MHz) by varying the capacitance of LC resonator circuit. The experimental results showed that the values of phase noise were -82, -93, -97[dBc/Hz] at 50[kHz] offset frequency, the pushing figures were 114, 94, 318[kHz] at applied voltage of $3\pm0.15$[V] and the harmonics were -21, -16, -13[dBc] for MSL lengths of 140mil 280mil, 560mil respectively. The frequency and output variation width were 779~898[MHz], -36~-33[dBm] for MSL with 140mil length; 818~836[MHz], -27.19~27.06[dBm] for 280mil; 751.54~751.198[MHz], -33.44~-33.31[dBm] for 560mil.

• 대한전자공학회논문지SD
• /
• 제43권9호
• /
• pp.23-30
• /
• 2006

본 논문은 전류 감지 feedback 기법을 사용한 고효율 CMOS DC-DC boost 변환기의 설계에 관한 것이다. 펄스-폭 변조 방식의 스위칭 동작을 위해 인덕터를 통해 흐르는 전류의 양을 감지하는 고해상도 전류 감지 회로를 설계하였다. 이를 통하여 외부 소자나 큰 면적을 차지하는 주파수 보상 회로 없이 안정적으로 동작하는 변환기 성능을 얻을 수 있다. 또한 외부 저항 열을 사용하여 다양한 입력/출력 전압 특성을 얻을 수 있다. 설계한 DC-DC 변환기는 thick gate oxide 옵션이 포함된 0.18-um CMOS 표준 공정으로 제작하였다. 부하 전류 200mA 이상에 대하여 3.3V의 출력을 얻는 변환기에서 최대 효율은 90% 이상, load regulation은 100mA의 변화에 대하여 1.15%의 특성을 나타낸다.

• 한국농공학회논문집
• /
• 제57권4호
• /
• pp.39-49
• /
• 2015

Since most medical facilities and medical personnel are concentrated in urban areas in South Korea, an imbalance of access to medical facilities causes a gap in medical resource availability between urban and rural areas. Accessibility to medical facilities is a means of assessment that evaluates a measure of inequality in utilization of medical resources. The evaluation of accessibility uses Euclidean distance, in general; however, this method has its limits in that Euclidean distance cannot reflect actual distance. This study aims to estimate real road distance from village halls to medical facilities in rural areas using Open Application Programming Interface (Open API) of an internet portal site. Using real road distance, we evaluated medical accessibility and compared it with Euclidean distance. The accessibility to primary medical institutions was valued relatively well, but secondary and tertiary medical institutions were vulnerable in Pyeonchang-gun. Comparing Euclidean distance with real road distance from village halls to medical facilities, real road distance appeared to be approximately 1.4 times that of Euclidean distance. This calculation is similar to the circuity factor of Gangwon-do in Korea that estimated to fix the limits of Euclidean distance and assumed real road distance.

• 한국통신학회논문지
• /
• 제29권2C호
• /
• pp.306-314
• /
• 2004

배열 안테나를 사용하고 있는 CDMA 기반의 이동 통신 기지국은 효율적인 빔 형성을 위해서 배열 안테나 시스템을 이루고 있는 송수신기 모듈의 정확한 성능을 필요로 하며 이를 위해 오차 보정이 반드시 필요하다. 일반적으로 오차 보정은 internal 오차 보정과 external 오차 보정으로 크게 구분 할 수 있다. 특히 internal 오차 보정은 수신기 모듈을 이루고 있는 RF/IF 회로 소자들의 특성이 변하기 때문에 정기적으로 오차 보정이 필요하다고 알려져 있다. 본 논문에서는 비동기 CDMA 시스템에서 안테나 배열 소자들 간의 진폭 이득과 위상 응답에 오차가 생길 때 온라인으로 보정 할 수 있는 알고리듬을 제안한다. 부공간(subspace) 기반의 알고리듬의 성능 평가와 분석 결과를 제시하기 위해 실험으로 측정한 데이터를 이용하였고, simulated annealing이라는 최적화 방법을 사용하여 부공간(subspace) 기반의 알고리듬에서 발생하는 초기값 문제를 해결하고 모의실험을 통해 확인하였다.

• 설비공학논문집
• /
• 제18권12호
• /
• pp.1007-1016
• /
• 2006

Although the advance in electronic technology enables a large number of circuity to be packed in a small volume, it is simultaneously required to remove the high heat load produced by them. In this study, the heat transfer and pressure drop characteristics of a mini-channel heat exchanger, which is designed for liquid cooling of electronic components, are investigated by varying operating conditions. Water and FC-72 were used as working fluids. The mini-channel heat exchanger was made with circular shape channels having din-meters of 2, 3, and 4 mm in regular intervals, and the channel length was 100 mm. The header and inlet guide pathway to provide uniform inflow were attached at the inlet of the test section. Copper block including the heaters was attached at the sidewall of the test section as a heat source, which provided the heat flux from 5 to $15W/cm^2$. The entrance effects enhanced the heat transfer coefficient in the mini-channel significantly. In addition, the single-phase pressure drop in the mini-channel was very similar to that predicted by the laminar flow correlation except that the transition Re decreased due to flow instability in the entrance region.

• 한국산림과학회지
• /
• 제108권1호
• /
• pp.59-66
• /
• 2019

이 연구는 체계적인 임내도로망의 구축을 위해 고규격 및 저규격의 임도를 포함하는 적정임도밀도를 산정한 후, 이를 토대로 구축한 복합임도망의 배치 효과를 5개의 비교임도망과 비교 평가하였다. 그 결과, 연구대상지의 적정임도밀도는 약 18.4 m/ha로 산정되었으며, 평균집재거리, 집재거리표준편차, 개발지수, 임도 우회계수 등의 지표에서 복합임도망이 가장 양호한 것으로 나타났다. 또한, 집재가능재적량과 집재가능면적에서 복합임도망은 간선임도망에 비해 약 4 %p 수준으로 비슷하게 나타났지만, 임도개설비용은 약 20 %p가 낮게 나타나 경제적 측면에서도 양호한 것으로 나타났다.