• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.558-564
• /
• 2007

3G Long Term Evolution, which aims for various mobile multimedia service provision by enhanced wireless interface, proposes VoIP-based voice service through a Packet Switching (PS) domain. As delay and loss-sensitive VoIP traffic flows through the PS domain, more challenging technical difficulties are expected than in Circuit Switching (CS) domain based VoIP services. Moreover, since 3G LTE, which adopts the OFDM as its physical layer, introduces Physical Resource Block (PRB) as a unit for transmission resources, new types of resource management schemes are needed. This paper proposes a PRB scheduling algorithm of MAC layer for VoIP service in 3G LTE and shows the simulation results. The proposed algorithm has two key parts; dynamic activation of VoIP priority mode to satisfy VoIP QoS requirements and adaptive adjustment of the priority mode duration in order to minimize the degradation of resource utilization.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.10
• /
• pp.16-23
• /
• 2003

In this paper, we propose a new optical hybrid switching system that takes advantage of both Optical Burst Switching (OBS) and Optical Circuit Switching (OCS) technologies. This system classifies incoming IP traffic flows into short-lived and long-lived flows for hybrid switching. For performance analysis, we model the system as a single server queue in a Markovian environment. The burst generation process is assumed to follow a two-state Markov Modulated Poisson Process (MMPP), and the service rate fluctuates based on the number of concurrent OCS sessions. Results of the mean delay and queue size for OBS bursts are derived.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.299-300
• /
• 1998

Recently the development of medical modality like as MRI, 3D US, DR etc is very active. Therefore it is more required not only the enhancement of quality in medical service but the improvement of medical system based on quantization, minimization, and optimization of high speed. Especially, as the changing into the digital modality system, it gets to start using ASIC(Application Specific Integrated Circuit) to realize one board system. It requires the implementation of hardware debugging and effective speedy algorithm with more speed and accuracy in order to support and replace existing device. If objected image could be linked to high speed process board with special interface and pre-processed using FPGA, it can be used in real time image processing and protocol of HIS(Hospital Information System). This study can support the basic circuit design of medical image board which is able to realize image processing basically using digitalized medical image, and to interface between existing device and image board containing image processing algorithm.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1716-1721
• /
• 2011

The Public Address and Passenger Information System of Rolling Stock should be able to perform automatic announcements in connection with TCMS(Train Control and Monitoring System), common announcements and emergency announcements for safe operation and the passengers. CCTV(Closed Circuit Television) System also should be able to watch passenger compartment for safety. Those equipments are very important thing for train service and safety. but the installation of equipment is restricted by space, weight, modulation. therefore, Passenger Information Intergrated System(PIIS) is required to consider economical efficiency, technical trend, expansion and space insufficiency. and system based on IP network has to be considered as new PIIS. so PIIS could meet economical efficiency and expansion. and it could go further and share network with TCMS and others.

• Journal of the Optical Society of Korea
• /
• v.20 no.3
• /
• pp.335-342
• /
• 2016

We demonstrate an optical asynchronous transfer mode/wavelength division multiplexing (OATM/WDM) optical access network, using a router based on an optical header decoder to conduct next-generation communications. The router consists of a decoder or hardware analysis processing of the header bit and switches. The router in the OATM/WDM optical access network is a key technology by which to satisfy subscribers’ requests, including reliability, cost efficiency, high speed, large-capacity transmission, and elevated information security. In this study, we carry out experiments in which a header decoder delivers to 16 and 32 subscribers with a single wavelength in the router. These experiments confirm the decoder’s successful operation via hardware using 4 and 5 header bits. We propose that this system may significantly contribute toward the realization of an optical access network that provides high-quality service to subscribers of next-generation communications.

• Journal of information and communication convergence engineering
• /
• v.22 no.3
• /
• pp.231-236
• /
• 2024

This paper presents a method used to identify partial discharge defects in cast-resin power transformers using a back-propagation algorithm. The Rogowski-type partial discharge (PD) sensor was designed with a planar and thin structure based on a printed circuit board to detect PD signals. PD electrode systems, such as metal protrusions, particle-on-insulators, delamination, and void defects, were fabricated to simulate the PD defects that occur in service. PD characteristics, such as rising time, falling time, pulse width, skewness, and kurtosis without phase-resolved partial discharge patterns, were extracted to intuitively analyze each PD pulse according to the type of PD defect. A backpropagation algorithm was designed to identify PD defects using a virtual instrument (VI) based on the LabVIEW program. The results show that the accuracy rate of back-propagation (BP) algorithm reaches over 92.75% in identifying four types of PD defects.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3B
• /
• pp.161-167
• /
• 2007

In this paper, we evaluate the capacity of voice over internet protocol (VoIP) services over high-speed downlink packet access (HSDPA), in which frame-bundling (FB) is incorporated to reduce the effect of relatively large headers in the IP/UDP/RTP layers. Also, a modified proportional pair (PF) packet scheduler design supporting for VoIP service is provided. The main focus of this work is the effect of FB on system outage based on delay budget in radio access networks. Simulation results show that VoIP system performance with FB scheme is highly sensitive to delay budget. We also conclude that HSDPA is attractive for transmission of VoIP if compared to the circuit switched (CS) voice that is used in WCDMA (Release'99).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1399-1406
• /
• 2010

Customers can monitor electricity use in real time in smart grid(ICT is grafted onto current grid), so various beneficial services can be provided to customer. We did a qualitative survey, HV(Home Visit) and FGD(Focus Group Discussion), in order to derive customer's cognition of using electricity in home and values that customers consider significantly and a quantitative survey in order to know willingness to use. Customers consider electricity indispensible for using home appliances, want to use safely far from electromagnetic waves, short circuit and electronic shock. Also, customers want to save energy conveniently with no stress. Customers want 'a function', 'information', 'motivation' for energy saving, and 'electromagnetic waves cutting', 'to prevent electronic shock', 'to prevent short circuit' for safe electricity use. In this study, we derived 4 services - energy monitoring, standby power cutting, remote control, energy consulting - based on customer values and unmet needs, which is connected to home network that customers can monitor total and each appliance's electricity usage in real time and control home appliances. The willingness to use of services is over 60% and especially energy monitoring and standby power cutting service have high willingness to use rate, about 80%.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.6
• /
• pp.114-123
• /
• 1985

This is the second part of the four-part paper describing the development of a packet-switched computer network named the cORNET In this paper, following the first par paper that describes the concepts of the KORNET and the development of the network management center (NMC), wc present the design of the KORNET and the development of the network node processor (NNP) The initial configuration of the KORNET consists of three NNP's and one NMC. We have developed each NNP as a microprocessor-based (Mc68000) multiprocessor system, and implemented the NMC using a super-mini computer (Mv/8000) For the KORNET we use the virtual circuit (VC) method as the packet service strategy and the distributed adaptive routing algorithm to adapt efficiently the variation of node and link status. Also, we use a dynamic buffer management algorithm for efficient storage management. Thc hardware of the NNP system has been designed with emphasis on modularity so that it may be expanded esily . Also, the software of the NNP system has been developed according to the CCITT recommendations X.25, X.3, X.28 and X.29.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.11
• /
• pp.73-82
• /
• 2011

As a demand of IP based packet service is increasing, transport network is evolving from circuit based transport technology using TDM to Ethernet based packet transport technology. In this paper we introduce packet transport network based on PBB-TE and MPLS-TP and propose a quality of service(QoS) management scheme to satisfy various user requirements in packet transport network. The proposed flow-based QoS management scheme guarantees that per-flow bandwidth control satisfies the predefined QoS requirement perfectly under bandwidth congestion condition by using perflow and per-PTL tunnel management. In order to evaluate the proposed scheme we defined flow and PTL tunnel per input frame and configured QoS parameters for each flow and PTL tunnel respectively. Simulation was done by using OPNET modeler 16.0 version.