• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.51
• /
• pp.99-108
• /
• 1999

B-ISDN link dimensioning is often known as a difficult problem because of the characteristics of Asynchronous Transfer Mode(ATM) such as various Quality of Services of different service requirements, and the statistical multiplexing resulting from virtual path/virtual circuit connections. In this paper, we propose a nonlinear integer optimization model for dimensioning B-ISDN considering the statistical multiplexing effects of virtual path connections(VPCs) and the modularity of resources allocated to a transmission link. The algorithm based on the simultaneous linear approximation technique as well as some numerical results will be also presented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.21-26
• /
• 2005

We propose a fully converged Ethernet and TDM transport system. Developed Ethernet and TDM convergence system can support not only L2 VPN service and premium multimedia service based on MPLS protocol but also TDM leased line service, simultaneously. Developed convergence system can provide high reliability for Ethernet packet due to support protection and restoration function of circuit based networks. Evaluation for Ethernet and TDM path was successfully performed to show the typical application of the proposed system in the legacy networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.92-100
• /
• 2016

It is informed that the Voice over LTE(VoLTE) which serves voice and message on IP networks is better in terms of economies of scale than the legacy voice service on 2G/3G circuit-switched networks because of its technological and cost efficiency. In addition, services of voice and data are running on a single LTE network and as a result VoLTE has the more economies of scope. But, there is no study about how much technology-efficiency VoLTE has compared to circuit-based voice service and how much voice charge can be reduced as VoLTE grows up. This paper analyzes empirically cost-efficiency of VoLTE against circuit-based voice service and quantifies the reduction of voice charge as 2G/3G voice traffic shifts to VoLTE. The results describe the first is that the average cost of the total voice traffic rises shortly just after the investment of LTE network for providing VoLTE but it will soon have a capacity available to reduce the charge due to VoLTE's outstanding cost efficiency on the assumption that voice traffic is fixed, and the second is that the charge can be cut to 60% of the current rate in case of all the voice traffic moves to VoLTE. The latter proves partially the validation of data-focusing pricing plan. Our results are expected to become basic data for network operators' establishing pricing strategies and for policy makers' inducing price cutting.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1948_1949
• /
• 2009

All the power generating station require dc auxiliary power systems to operate those dc components that must be available if a loss of ac power occur. Some examples of such components are auxiliary motors, circuit breakers, relays and solenoids. The dc source may be one common battery for both power and control or two separate batteries; one for power and another for control. Typically, a dc auxiliary power system is designed as an ungrounded system, instead of grounded system, so that a low-resistance ground fault on one of its two polarities will not affect the operation of the system, thus increasing system reliability and continuity of service. A ground detector should provide a high polarity-to-ground resistance so that a single ground fault occurring on the system will not affect the operation of that system. Sensitive relays have been known to energize momentarily while the cable and capacitive charge to ground shifts[1]. A power station had experienced this kind of incident and performed root cause analysis based on PC based simulation program known as PSpice. This simulation showed adapted relays on the system energize momentarily and design criteria on this relay should be corrected.

• Journal of KIISE:Software and Applications
• /
• v.37 no.5
• /
• pp.370-377
• /
• 2010

An Intelligent service robot performs various complex tasks in dynamic environment, providing useful intelligent services for human users. The robot needs to continuously monitor dynamically changing environment and reactively choose the best behavior for the changing context. The selected behaviors may include nondeterministic or parallel actions. In this paper, we present a structured reactive robot programming language, SPRIT that is based on Structured Circuit Semantics (SCS). SPRIT is fully implemented as a task executor and tested for reactive robot tasks in dynamic environment to show that it can be used to explicitly represent and effectively implement the complex reactive behaviors of intelligent robot systems.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.113-118
• /
• 2005

Softswitch is the core BcN equipment which voice and multimedia switching based on the IP Technologies. It is designed to replace the Class 5(local Exchange) and Class 4(Toll Exchange) switch based on the circuit wired and wireless switching network technologies. Softswitch gets its name because typically it is a software based solution implemented on general purpose computers/servers. While the traditional PSTN switches are rely on dedicated facilities for T and S inter-connection and are designed primarily for voice communications. Packet based Softswitch is divided the control of call and bearer, very different from Public telephone network. Sometimes Call Agent or Media Gateway Controller, a key component in the VoIP solution, is also called Softswitch. This paper will suggest the software architecture of softswitch for performance in call processing part, also suggest the session management model to cover call setup latency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.67-72
• /
• 2010

In this paper, we verify the driverless operation possibility of MBS, which could overcome the defects of conventional track-circuit-based FBS, such as additional needs of maintenance and others problems according to short-circuit sensibility and, and which could allow the minimal interval between trains. With MBS, we can expect the reduction of headway, then the increase of transportation demand, and the protection of unnecessary speed variation because it allows the real time detection of train position from central office, and direct transmission of data between preceding trains and the following ones. In addition, it is possible to reduce the number of wayside-equipment substantially, to improve the passenger service, and to the achieve the positive economic effects by comfortable ride.

• Journal of the Optical Society of Korea
• /
• v.11 no.2
• /
• pp.59-62
• /
• 2007

In this paper, we introduce a reliable, scalable, and cost-effective switchless wavelength division multiplexing (WDM) network based on a quality-of-service supporting reservation-based medium access control (MAC) protocol. The protocol not only provides both packet and circuit switching but also supports multicasting. The network efficiency is significantly increased by spatially reusing wavelengths and exploiting multiple free spectral ranges (FSRs) of arrayed waveguide grating (AWG) employed in the architecture. We have demonstrated the feasibility of this architecture by simulating in $Optsim^{TM}$.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.99-103
• /
• 2009

Recently, as wired and wireless communication services have rapidly developed and multimodal mobile devices which have various characteristics have widely spread, the need for new convergence services increases. The growing population of VoIP technologies and the high communication expense yield that the market of IP based telephony such as WiFi phone and IP phone is substituted for one of the conventional PSTN telephony. With the help of this trend, the wireline network operators desire to find a market in mobile networks. Therefore, they focus on Fixed Mobile Convergence (FMC) service as one of the key factors to accomplish this goal. FMC services are able to provide the mobility of voice services between circuit switched and packet switched networks. IP Multimedia Subsystem (IMS) based Voice Call Continuity (VCC) is one of the schemes to embody FMC services. As Application Server (AS) which has this VCC function provides seamless handover of services between heterogeneous networks, FMC subscribers can communicate seamlessly with others m WiFi domain and COMA domain using WiFi-COMA dual phone. Most of enterprises have already introduced IP network infrastructure and IP-PBX (Private Branch eXchange) for telephony. However, the problems of high communication cost and work inefficiency due to frequent outside jobs or business trips have remained. In order to solve these problems, demands for enterprise FMC services increase. In this paper, we introduce a new IP-PBX based VCC model that can provide seamless handover of voice services between WiFi and COMA networks for enterprise users and we investigate some interworking and security issues between Soft Switch (SSW) and IMS, or between IMSs. In addition, we introduce a new service that can provide the continuity of voice sessions as well as video sessions using Multimedia Session Continuity (MMSC) technology which has evolved from VCC. This service is expected to be one of the next-generation personalized services based on user's context.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.4
• /
• pp.483-491
• /
• 2012

It is expected that, in the future, DC power service will be widely used for photovoltaic home power generation systems, since DC consuming devices are ever increasing. Instead of using multiple converters to convert DC to AC and then AC to DC, the power service could solely be based on DC. This would eliminate the need for converters, reducing the cost, complexity, and possibly increasing the efficiency. However, configuration of direct DC power service with mechanical contacts can cause spark voltage or an electric shock when the switch is turned on and off. To solve these problems, in this paper, a contactless power supply for a DC power service that can transfer electric power produced by photovoltaics to the home electric system using magnetic coupling instead of mechanical contacts has been proposed. The proposed system consists of a ZVS boost converter, a half-bridge LLC resonant converter, and a contactless transformer. This proposed contactless system eliminates the use of DC switches. To reduce the stress and loss of the boost converter switching devices, a lossless snubber with coupled inductor is applied. In this paper, a switching frequency control technique using the contactless voltage sensing circuit is also proposed and implemented for the output voltage control instead of using additional power regulators. Finally, a prototype consisted of 150W boost converter has been designed and built to demonstrate the feasibility of the proposed contactless photovoltaic DC power service. Experimental results show that 74~83% overall system efficiency is obtained for the 10W~80W load.