• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.10
• /
• pp.1875-1880
• /
• 2011

This paper proposes a battery model applicable to Autonomie environment. Also, a various of experiment is implemented for validation. The proposed battery model modifies Randles equivalent circuit and battery parameters are extracted from pulsed current tests. The parameters are two-dimensional function of current and SOC(State of Charge). The battery model is developed in the Matlab/Simulink and is implemented for NiMH Panasonic HHR650D and compared with pulsed current discharge curves. The simulation results validate the accuracy of the proposed model and the model is also tested by adding it on Autonomie for HEV application. Constant current charge/discharge, pulsed current test that can be used to extract battery parameter are performed and test results are used to build up the proposed battery model for Autonomie.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1491_1492
• /
• 2009

The impedance of a vertical grounding electrode is not lowered by expanding the dimension of the grounding electrode, and the length of thr vertical grounding electrode which shows the minimum value of the grounding impedance for each condition of frequency and soil characteristics is existent, and it is defined as Critical length. In this paper, the critical lengths for the vertical grounding electrodes are calculated by using the distributed parameter circuit model. The adequacy of the simulations has been confirmed by comparing the simulated results with the measured results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.585-588
• /
• 1995

In this study, the analysis of the static and dynamic characteristics of the load-sensitive hydraulic pump control system used in the hydraulic excavator was performed by hydraulic circuit ananlysis program. Thess results was verified by the experimental data of the hydraulic excavtor system. The responses on effective parameters of system at the controllable region and the pressure variation of the pump used in hydraulic excavator system was studied to enhance the static performace of the system. the parameter enhance dynamic sharacteristics was considerd.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.483-489
• /
• 2009

Electrolytic capacitors are used in variety of equipments as smoothening element of the power converters because it has high capacitance for its size and low price. Electrolytic capacitors, which is most of the time affected by aging effect, plays a very important role for the power electronics system quality and reliability. Therefore it is important to estimate the parameter of an electrolytic capacitor to predict the failure. This objective of this paper is to propose a new method to detect the rise of equivalent series resistor(ESR) in order to realize the online failure prediction of electrolytic capacitor for DC output filter of power converter. The ESR of electrolytic capacitor estimated from RMS result of filtered waveform(BPF) of the ripple capacitor voltage/current. Therefore, the preposed online failure prediction method has the merits of easy ESR computation and circuit simplicity. Simulation and experimental results are shown to verify the performance of the proposed on-line method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.761-767
• /
• 2007

In this paper, we deal wih a concurrent dual band low noise amplifier for a Radio Frequency Identification(RFID) reader operating at 912MHz and 2.45GHz. The design of the low noise amplifier is based on the TSMC $0.18{\mu}m$ CMOS technology. The chip size is $1.8mm\times1.8mm$. To improve the noise figure of the circuit, SMD components and a bonding wire inductor are applied to input matching. Simulation results show that the 521 parameter is 11.41dB and 9.98dB at 912MHz and 2.45GHz, respectively The noise figure is also determined to 1.25dB and 3.08dB at the same frequencies with a power consumption of 8.95mW.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1503-1510
• /
• 2017

In this paper, a thermal analysis of a high speed induction motor with a PWM voltage source was performed by considering harmonic loss components. The electromagnetic analysis of the high speed induction motor was conducted using the time-varying finite element method, and its thermal characteristics were carried out using the lump-circuit method. Harmonic losses from tests in the high frequency region were divided into core loss and conductor loss components using various ratios, in order to determine the loss distributions for the thermal analysis. The results from both the calculations and experiment were validated using a high speed induction motor prototype operating at 20,000rpm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.2
• /
• pp.316-321
• /
• 2005

A new HBT current source model and the corresponding direct parameter extraction methods are presented. Exact analytical expressions for the current source model parameters are derived. This method is applied to scalable modeling of HBT, Some techniques to reduce redundancy of the parameters are introduced. The model based on this method can accurately predict the measured data for the change of ambient temperature, size, and bias.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.2
• /
• pp.193-201
• /
• 1998

In this paper, the standard Dole, Glover, Khargoneker, and Francis (abbr. : DGKF 1989) H\ulcorner controller (H\ulcornerC) is extended to the nonlinear feedback linearization-H\ulcorner/sliding mode controller (NFL-H\ulcorner/SMC), to tackle the problem of the unmeasurable state variables as in the conventional SMC, to obtain smooth control as the linearized controller in a linear system, and to improve the time-domain performance under a worst scenario. The proposed controller is obtained by combining the H\ulcorner estimator with the nonlinear feedback linearization-sliding mode controller (NFL-SMC) and it does not need to measure all the state variables as in the traditional SMC. The proposed controller is applied as a nonlinear power system stabilizer (PSS) for the improvement of the power system damping characteristics of an single machine infinite bus system (SMIBS) connected through a double circuit line. The effectiveness of the proposed controller is verified by nonlinear time-domain simulation in case of a 3-cycle line-to-ground fault and in case of the parameter variations for the AVR gain K\ulcorner and for the inertia moment M.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.216-218
• /
• 2005

Planar spiral inductors on silicon substrates were optimally designed using MATLAB, which is a tool to perform numerical computations with matrices. The equivalent circuit parameters of the spiral inductors were extracted from the data measured from the spiral inductors fabricated using a 0.18 $\mu\textrm{m}$ RF CMOS process. The metal width, which is a critical design parameter, was optimized for the maximum quality factor with respect to the operating frequency.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.913-915
• /
• 2001

본 논문에서는 유한 요소법을 압전체에 적용하여 계산한 임피던스 파형을 실험적으로 검증하였으며 이를 압전 변압기에 적용하여 압전 변압기의 공진 특성 즉 입력측에서의 전기적인 임피던스 및 출력측에서의 전기적인 임피던스를 해석하였다. 또한 압전 변압기의 공진 모드를 나타내는 어드미턴스 궤적을 이용한 압전 변압기의 등가 회로 정수의 계산을 통해 등가 회로를 구성하였으며 무 부하시의 승압비를 계산하였다. 등가 회로를 이용하여 계산된 승압비의 결과를 유한 요소법을 이용한 결과와 비교하여 손실을 나타내는 등가 회로 정수(R)를 계산하였으며 유한 요소법에 의한 기계적인 진동 손실의 결과와 비교하여 계산된 저항(R)값의 타당성을 검증하였다.