• Bulletin of the Korean Chemical Society
• /
• 제13권6호
• /
• pp.605-612
• /
• 1992

Chromium oxide/zirconia catalysts were prepared by dry impregnation of powdered $Zr(OH)_4$ with ($NH_4$)$_2$CrO$_4$aqueous solution. The characterization of prepared catalysts was performed using FTIR, XPS, XRD and DTA methods, and by the measurement of surface area. The addition of chromium oxide to zirconia shifted the transitions of $ZrO_2$ from amorphous to tetragonal phase and from tetragonal to monoclinic phase to higher temperature due to the strong interaction between chromium oxide and zirconia, and the specific surface area of catalysts increased in proportion to the chromium oxide content. Since the $ZrO_2$ stabilizes supported chromium oxide, chromium oxide was well dispersed on the surface of zirconia, and ${\alpha}$-$Cr_2O_3$ was observed only at the calcination temperature above 1173 K. Upon the addition of only small amount of chromium oxide (1 wt% Cr) to $ZrO_2$, both the acidity and acid strength of catalyst increased remarkably, showing the presence of two kinds of acid sites on the surface of $CrO_x$/$ZrO_4$-Bronsted and Lewis.

• 한국식품영양과학회지
• /
• 제33권9호
• /
• pp.1486-1491
• /
• 2004

식품오염 관련 중금속들의 에스트로겐성을 in vitro 와 in vivo 분석방법을 병행하여 평가하였다. 분석방법은 1) estrogen receptor dependent transcriptional expression 분석법, 2) E-screen assay 그리고, 3) 마우스 자궁비대시험 (uterotropic assay)을 사용하였다. 시험에 사용한 물질로는 $17\beta$-estradiol, diethylstilbestrol(DES), arsenic oxide, bis (tri-n-butyltin), cadmium chloride, chromium chloride, lead acetate, mercuric chloride을 사용하였다. Estrogen receptor dependent transcriptional expression 분석 결과, bis(tri-nbutyltin) > cadmium chloride > chromium chloride 순으로 에스트로겐성이 크게 나타났으며, mercuric chloride, lead acetate, arsenic oxide는 거의 나타나지 않았다. E-screen test 결과, bis(tri-n-butyltin) > cadmium chloride > chromium chloride 순으로 에스트로겐성이 크게 나타났으며, mercuric chloride, lead acetate, arsenic oxide는 거의 나타나지 않았다. 자궁비대시험 결과도 마찬가지로 bis(tri-nbutyltin), cadmium chloride, chromium chloride은 자궁중량 비대를 크게 초래하였으며, 반면에 mercuric chloride, lead acetate, arsenic oxide는 그러한 효과가 미약하거나 없었다. 세 분석방법 결과 bis(tri-n-butyltin), cadmium chloride, chromium chloride 순으로 에스트로겐성이 크게 나타났다. 이러한 결과는 최근 bis(tri-n-butyltin)과 cadmium chloride이 에스트로겐성이 있다는 다른 연구결과들과 잘 일치하며, 또한 크롬화합물도 에스트로겐성이 있다는 것을 새롭게 제시하고 있다. 본 연구는 세 단계 수준(전사활성화단계, 세포증식작용, in vivo assay)의 분석을 병행함으로써 수많은 중금속의 에스트로겐성을 효과적으로 평가할 수 있다는 것을 제시해주고 있다.

• Bulletin of the Korean Chemical Society
• /
• 제23권11호
• /
• pp.1513-1518
• /
• 2002

Kinetic studies on the water-gas shift reaction catalyzed by magnetite/chromium oxide and copper/zinc oxide were carried out by using an in situ photoacoustic spectroscopic technique. The reactions were performed in a closed-circulation reactor system using a differential photoacoustic cell at total pressure of 40 Torr in the temperature range of 100 to $350^{\circ}C.$ The CO2 photoacoustic signal varying with the concentration of CO2 during the catalytic reaction was recorded as a function of time. The time-resolved photoacoustic spectra obtained for the initial reaction stage provided precise data of CO2 formation rate. The apparent activation energies determined from the initial rates were 74.7 kJ/mol for the magnetite/chromium oxide catalyst and 50.9 kJ/mol for the copper/zinc oxide catalyst. To determine the reaction orders, partial pressures of CO(g) and H2O(g) in the reaction mixture were varied at a constant total pressure of 40 Torr with N2 buffer gas. For the magnetite/chromium oxide catalyst, the reaction orders with respect to CO and H2O were determined to be 0.93 and 0.18, respectively. For the copper/zinc oxide catalyst, the reaction orders with respect to CO and H2O were determined to be 0.79 and 0, respectively.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.160-166
• /
• 2019

In this study, we investigated the long-term stability of Nd₂NiO₄ solid oxide fuel cell (SOFC) cathodes to evaluate their chromium poisoning tolerance. Symmetrical cells consisting of Nd2NiO4 electrodes and a yttria-stabilized zirconia electrolyte were fabricated and the cell potential and polarization resistance were measured at 850 ℃ in the presence of gaseous chromium species for 800 h. Up to 500 h of operation, the cell potential remained constant at 500 mA/㎠. However, it increased slightly over the operation duration of 550-800 h. No appreciable increase was observed in the polarization resistance of the Nd₂NiO₄ cathode during the entire operation of 800 h. Physicochemical examinations revealed that the gaseous chromium species did not form chromium-related contamination not only in the Nd₂NiO₄ cathode but also at the cathode/electrolyte interface. The results demonstrated that Nd₂NiO₄ is resistant to chromium poisoning, and hence is a potential alternative to standard perovskite cathodes.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.518-523
• /
• 2002

The influences of ion beam energy and reactive oxygen partial pressure on the physical and crystallographic characteristics of transition metal oxide compound(CrOx) film were studied in this paper. Chromium oxide films were deposited onto a cover-glass using ion Beam Sputter Deposition(IBSD) technique according to the various processing parameters. Crystallinity and grain size of as-deposited films were analyzed using XRD analysis. Thickness and Resistivity of the films were measured by $\alpha$-step and 4-point probe measurement. According to the XRD, XPS and resistivity results, the deposited films were the cermet type films which had crystal structure including amorphous oxide(a-oxide) phase and metal Cr phase simultaneously. The increment of the ion beam energy during the deposition process led to decreasing of metal Cr grain size and the rapid change of resistivity above the critical $O_2$ partial pressure.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제22권6호
• /
• pp.22-28
• /
• 2017

The accuracy of analytical results in response to the use of different additives ($NH_4Cl$, KCl, $LaCl_3$) and oxidant gases was evaluated and compared by using Atomic Absorption Spectrometry (AAS). Identification of spectroscopic interferences and possible improvements in Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) analysis were also discussed. The average accuracies of total chromium using Certified Reference Materials (CRMs) were found to be 72.1~94.2% in air/acetylene flame condition by AAS, and they were improved to 100.5~110.5% when the oxidants was changed to nitrous oxide rather than adding the additives. The field samples showed similar trends to CRMs, but chromium concentrations were highly variable depending on analytical conditions. The average accuracies using CRMs were estimated to be 89.3~166.1% by ICP-AES, and improved to below 121.7% after eliminating iron interference. Field samples with low chromium and high iron concentration were measured to be > 30% lower in total chromium concentrations by ICP-AES than AAS in nitrous oxide/acetylene flame. Total chromium concentrations in soil could be analyzed with better accuracy under nitrous oxide/acetylene flame by AAS because it was more effective to increase the temperature of the flame than to eliminate the chemical interference for maximizing atomization of chromium. When using ICP-AES, interference substances, total chromium levels, and analytical conditions should be also considered.

• Journal of the Korean Wood Science and Technology
• /
• 제13권2호
• /
• pp.35-44
• /
• 1985

The purposes of this study were, first, to investigate retention levels of toxic elements and oxide individual plies for each panel and, second, to examine disproportioning of individual toxic elements Thirty five water gum plywood panels were treated with a copper-chromium-arsenic preservative (CCA) by the soaking process as the treament time were applied. Such individual plies at a distance of 2.5cm, 7.5cm from the edge were assayed for CuO, $CrO_3$, and $As_2O_5$ on the basis of copper, chromium and arsenic content by Atomic Absorption Spectrophotometry. In these experiments, 12mm thickness plywood panels made of water gum, which were selling, were selected for the preservative treatment. Treating solutions were prepared for 10%, dilute solution of copper-chromium-arsenic preservative and then 1, 3, 6, 12 and 24 hours soaking trements in CCA preservative were applied. The results obtained are as follows: 1. The retention of total oxide in the face and back plies (1+7) retained more than the retention of total oxide in the other plies. The total oxide retention for the individual plies except the face and back plies (1+7) was showed in the following orders; cross plies (3+5), cross plies (2+6), core ply (4). 2. The retentions of total oxide increased as the increase of treatment time. The CCA treated plywood retained high levels of total oxide retention in the face and back plies (1+7). 3. All the retentions in the face and back plies (1+7) is over 5Kg/$m^3$, New Zealand Timber Preservation Standards Specification, and after 6 hours, the retentions in the cross plies (3+5) is over 4. The relative penetration of copper, chromium, and arsenic were not affected by the treatment time. The proportion of arsenic decreased in relation to both copper and chromium and the proportion of copper increased in relation to both chromium and arsenic. 5. A disproportioning of copper, chromium occurred with longer distance from edge, and with longer distance from edge the leachability resistance of CCA treated specimens decreased. After 6 hours (soaking time), the proportion of active elements at a distance of 2.5cm from the edge was consistent. And after 24 hours-soaking, the proportion of active elements at a distance of 7.5cm from the edge was consistent.

• 대한화학회지
• /
• 제23권3호
• /
• pp.152-160
• /
• 1979

Furfural의 수소화반응에 쓰이는 구리-크롬산화물계 촉매에서 바륨, 스트론륨 등의 첨가효과 및 그 기능에 관하여 조사하였다. X-선 회절에 의하면 $BaCrO_4$, $SrCrO_4$등의 생성을 확인할 수 있었으나, 촉매표면적에는 차이가 없었다. 그러나 이들의 첨가로 촉매능은 개선되어 첨가전보다 반응시간에 따른 활성저하폭이 훨씬 적어졌다. 바륨이 첨가된 또는 실기카에 분산시킨 촉매는 CO흡착으로 분산된 Cr(V)의 EPR 스펙트럼을 보여주었으며 표면의 산화-혼원과정에서 가역적인 스펙트럼을 나타내었다. 바륨의 첨가로 촉매활성점이 분산되어 존재함으로서 furfural의 수소화반응에서 향상된 촉매능을 보여주는 것으로 생각된다.

• 대한금속재료학회지
• /
• 제46권10호
• /
• pp.652-661
• /
• 2008

Reduction of NOx in emission gas, improvement of engine efficiency, and extension of warranty period has made demands for developing materials more corrosively resistant to the inner-muffler environments or predicting the lifetime of materials used in muffler more precisely. The corrosion inside muffler has been explained with condensate corrosion mainly though thermal oxidation experiences prior to condensate corrosion. Hence, the aim of this study is to describe how the thermal oxidation affects the corrosion of stainless steel exposed to the inner-muffler environments. Auger electron spectroscopy and electrochemical tests were employed to analyze oxide scale and to evaluate corrosion resistance, respectively. Thermal oxidation has different role of condensate corrosion depending on the temperature: inhibiting condensate corrosion below $380^{\circ}C$ and enhancing condensate corrosion above $380^{\circ}C$. The low temperature oxidation causes to form compact oxide layer functioning a barrier for penetrating condensate into a matrix. Although though thermal oxidation caused chromium-depleted layer between oxide layer and matrix, the enhancement of the condensate corrosion in high temperature oxidation resulted from corrosion-induced crevice formed by oxide scale rather than corrosion in chromium-depleted layer. It was proved by aids of anodic polarization tests and measurements of pitting corrosion potentials. By the study, the role of high temperature oxidation layer affecting the condensate corrosion of stainless steels used as muffler materials was well understood.

• 한국환경농학회지
• /
• 제20권5호
• /
• pp.346-351
• /
• 2001

Oxidation of Cr(III) to Cr(VI) can increase availability and toxicity of chromium. In this study, possible mechanisms by which pH and organic matter can control the chromium oxidation and reduction in soil system were examined using four soils of different pHs and organic matter contents. Reduction of Mn-oxides occurred in the soils of higher organic matter content (4.0%), but Mn-oxide was quite stable during the incubation in the soil of pH 7.0 and 0.5% organic matter content. Manganese oxides can be reductively dissolved at lower pH and higher organic matter conditions. The soil of pH 7.0 and 4.0% organic matter content showed the highest Cr-oxidation potential. Reduction of soluble Cr(VI) was observed in all the soils examined. The most rapid reduction was found in soil of pH 5.5 and 4.0% organic matter content, but the reduction was slow in soil of pH 7.0 and 0.5% organic matter content. Thus, the reductive capacity of organic matter added soils was much higher as compared to other two soils of lower organic matter content. In all the soils examined, the reductive capacity of soluble chromium was much higher than the oxidative capacity. Organic matter was found to be the most important controlling factor in the chromium oxidation and reduction. Reduction of Cr(VI) to Cr(III) could be a potentially useful remediation or detoxification process, and availability and toxicity of chromium in soil would be controlled by controlling organic matter content and pH of the soils.