• Textile Coloration and Finishing
• /
• v.5 no.1
• /
• pp.33-39
• /
• 1993

This study was to examine the anti-bacteria effect of chrome-tanned garment leathers by various processes to article from hide. Anti-bacterial test by halo test and shake flask method, and pH value measurment are carried out in this study. The results can be obtained as follows: 1. In the soaking process of chrome-tanned garment leathers, it needs more effective anti-bacterial treatment. 2. pH value of samples by various processes has affected to anti-bacteria effect. 3. Chrome used by the tanning and the neutralization process have been found to be the anti-bacteria activity. 4. The dyeing, the fatliquoring and the finishing process has required anti bacteria treatment.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.35-35
• /
• 2002

Atomic force microscopy was applied to study the formation and growth mechanism of thin chrome layers prepared under various pulse plating conditions. The chrome was electro-deposited from an electrolyte bath containing 250 gl-l of chromic acid, 25 gl-l of sulfuric acid using direct current density of $1.6{\;}mA.$\textrm{mm}^{-2} and pulse currents with on-off time from 5 to 900 ms. The higher current density enhanced nucleation rate which resulted in refining grain size. The chrome growth kinetics determining nodule size and shape significantly depends on the duration of on-time rather than duration of off-time and on/off time ratio.

• Fibers and Polymers
• /
• v.7 no.3
• /
• pp.262-269
• /
• 2006

In this paper, the effects of low temperature plasma (LTP) treatment on the dyeing properties of the wool fiber were studied. The wool fibers were treated with oxygen plasma and three types of dye that commonly used for wool dyeing, namely: (i) acid dye, (ii) chrome dye and (iii) reactive dye, were used in the dyeing process. For acid dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased but the final dyeing exhaustion equilibrium did not show any significant change. For chrome dyeing, the dyeing rate of the LTP-treated wool fiber was also increased but the final dyeing exhaustion equilibrium was only increased to a small extent. In addition, the rate of afterchroming process was similar to the chrome dyeing process. For the reactive dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased and also the final dyeing exhaustion equilibrium was increased significantly. As a result, it could conclude that the LTP treatment could improve the dyeing behavior of wool fiber in different dyeing systems.

• Corrosion Science and Technology
• /
• v.2 no.2
• /
• pp.102-108
• /
• 2003

The surface treatments. Chrome/Manganese and Modified Chrome Pickle, that are treated to improve the anti-corrosion property which is needed to increased the probability of prototype product enabled the sand cast Magnesium test specimens to have better corrosion resistance than non-treated one. Sand cast Magnesium specimens which was treated only with chemical conversion coating had same corrosion resistance with the Steel specimens plated by Zinc, and the another one that had the finishing treatment(painting) worked on the chemical surface treatment had the corrosion resistance property to meet to FPO-3 requirement. We also investigated the multiple finishing system(chemical surface treatment + 3 coating) to test the severe condition that magnesium should to endure.

• Journal of Korean Society of societal Security
• /
• v.2 no.2
• /
• pp.63-68
• /
• 2009

Seismic design of newly built bridges can be considered and carried out during construction process according to the revised road bridge design standard issued recently. While for the existing reinforced concrete bridge priers under service before new standard implements, their resistance capacity against lateral seismic loading is inferior. In this research, seismic reinforcing for existing bridge piers by nickel-chrome alloy bar has been analyzed. Based on the established model by MIDAS program, the behaviors of bridge piers including deformation and stress with and without nickel-chrome alloy reinforcing bars have been compared and discussed under lateral seismic loading. And the advantages of using nickel-chrome alloy bar as seismic reinforcement over other materials, such as good performance, good economy etc. have been demonstrated by comparison with other researches. Also the anti-seismic efficiency of nickel-chrome alloy reinforcing bars has been confirmed by MIDAS modeling analysis.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1104-1108
• /
• 1999

In this study it was focused that if the chrome could be removed in the shaving dust, the reusable protein resource could be recycled from the shaving dust. As the chrome forms a Cr-collagenate by cross linking of collagen in the shaving dust, the dust was steeped for swelling and plumping by $Ca(OH)_2$ solution and then chromium in dust was resolved out by $H_2SO_4$ solution in the first stage process. In the second stage one, dust was swelled and plumped by NaOH solution and then the chromium in dust was oxygenated to a hexavalent chrome, which has high solubility in $H_2O_2$ solution. And then the chromium was removed byt he steeping of $H_2SO_4$ solution as the last process. The first stage process was consisted of the sequential steeping of 3%-$Ca(OH)_2$ and $0.8%-H_2SO_4$. In the second stage the total chrome was effectively removed by the sequential steeping of 0.1%-NaOH, $3%-H_2O_2$ and $1%-H_2SO_4$. In the completely dechromated dust, the humidity was measured as 10.68% and the crude protein was contained by 79.81%. Steeping solutions were reused 3 times for chrome removal process, the chrome was entirely removed in shaving dust.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.223-234
• /
• 2000

Objective - To evaluate the usefulness of chromium in erythrocytes as a biological marker of exposure to hexavalent chromium in chromate producers and chrome platers Methods - Blood and urine samples were ramdomly obtained from chromate producers (n=34) and chrome platers (n=35), and non-exposed workers (n=75), chromium level in erythrocytes and plasma, and urine were measured. Different chromium exposure workers were assessed through measurements of airborne hexavalent chromium concentrations using a personal air sampler. Linear associations between variables were evaluated with correlation analysis. Results - The chromate producers had mean chromium levels in erythrocytes five fold as higher than the chrome platers, and fifteen fold higher than non-exposed group. Among the chromium exposed workers, airborne hexavalent chromium was positively and strongly correlated with in erythrocytes (r=0.689, p<0.01), and erythrocytes chromium was inversely correlated with hematocrit (r=-0.441, p<0.01), hemoglobin (r=-0.465, p<0.01) and the number of red blood cells (r=-0.28, p<0.05). Conclusions - In conclusion, this study suggests that chromium in erythrocytes is a good indicator of the chromium body burden caused by exposure to hexavalent chromium.

• Solar Energy
• /
• v.10 no.1
• /
• pp.92-97
• /
• 1990

The electrochemical approach to the characteristics of black chrome solar selective coatings has been reviewed. Based on the formula of the ChromOnyx bath solution manufactured by Harshaw Company, the chromic acid-propionic acid bath solutions have been prepared by KIER. Comprehensive review of the black chrome electrodeposition mechanism also has been performed on the role played by constituents in the bath solution during electrodeposition. The optical properties such as absorption and emittance of electrodeposited black chrome coatings obtained from the new formula and their surface analysis will be reported in detail.

• Journal of Environmental Science International
• /
• v.11 no.4
• /
• pp.319-325
• /
• 2002

This experiment was carried out to investigate the effects of heavy metals (copper, cadmium, lead and chrome) on the growth of plant and seed germination of Arabidopsis thaliana treated with various concentrations of heavy metals. Cadmium and chrome among the 4 heavy metals had no effect on the growth of stem even in the concentration fifty times higher than the official standard concentration of pollutant exhaust notified by the Ministry of Environment. The official standard concentration of cadmium, however, stimulated the growth of stem in general, increasing leaf size and surface area, although it had no effect on the length of stem. But the growth of stem was decreased about 18% in the official standard concentration of pollutant exhaust of lead and copper. There was no growth of root in the concentration of lead and copper ten times higher than the official standard concentration. Cadmium and chrome had no effect on the seed germination, but lead and copper decreased the rate of seed germination. Seeds were not germinated in the concentration of copper ten times higher than the official standard concentration and in the concentration of lead fifty times higher than the official standard concentration. From this research three peculiar results were obtained. Chrome in the soil did not have much effect on the plant growth and seed germination of Arabidopsis thaliana. Cadmium stimulated the stem growth in an optimum concentration. But lead and copper reduced the plant growth and seed germination even in a small concentration, especially copper had the worse effect.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.10
• /
• pp.1-8
• /
• 2021

Cylinder liners used in diesel engines of combat equipment are prone to cavitation due to wet cooling. The damage caused by erosion and corrosion due to cavitation has a fatal effect on the performance and lifespan of a diesel engine. Therefore, a study was conducted to improve the durability of cylinder liners. Two surface treatment techniques were proposed: nitriding and chrome plating. It was observed that the amount of erosion on the surface of nitride-treated cylinder liners was high because the surface-treated part eroded due to its weak impact resistance against the bubble explosion generated by cavitation. In contrast, the chrome-plated cylinder liner had a lower amount of erosion among the specimens subjected to the accelerated test. These results verified that the resistance of chrome-plated liners against cavitation is high. Therefore, it can withstand the impact of bubble explosion. If the chrome plating thickness is set with reference to the KS standard, an exceptional durability of abrasion, wear resistance, and corrosion resistance can be obtained. If the thickness is set between 120~250㎛, it is expected that the durability of the cylinder liner can be improved. Although a recovery method for corroded cylinder liners is suggested, the proposed method has an inherent risk of crack generation. Therefore, further research is required to solve this problem.