• Journal of Conservation Science
• /
• v.33 no.3
• /
• pp.203-214
• /
• 2017

This study evaluated the degradation characteristics of FRP by ultraviolet (UV) rays and applied a UV-resistant coating to prevent the degradation of the surface of these sculptures. As a result of the degradation caused by UV rays, there were slight changes in the FRP surface and contact angle. The chromaticity sharply increased in the early phase of degradation. After applying the coating to the FRP, no significant surface changes were observed. However, it had lower changes in color as compared to the uncoated specimen, so it was verified that the control of discoloration could be possible. Some changes in the gloss and contact angle were observed depending on the extent of degradation, but the UV coating agent remained relatively stable. Analysis of the infrared light spectrum showed that there were almost no chemical changes, and it could be concluded that the coating treatment prevented degradation for a certain period. This study investigated the degradation of FRP used as materials in artwork exposed to UV rays, and it was found that there was a delay in the onset of degradation in the FRP with the UV-resistant coating when compared to the uncoated FRP.

• Conservation Science in Museum
• /
• v.24
• /
• pp.117-132
• /
• 2020

The painting layer of Payathonzu temple mural paintings in the ruins of Bagan Myanmar has been damaged due to various reasons. In this study, the applicability of Neem resin, a traditional Myanmar adhesive, as a fixative on the painting layer was examined. Cow glue and Paraloid B-72 were selected as fixatives in the comparison group, and pseudo-specimens with conditions similar to the original mural paintings were produced to examine the changes before and after applying the fixatives and according to the deterioration experiments. As a result of conducting the experiments and comparing the fixatives, it was found that changes on the surface such as smudge, yellowing and gloss are greater with the application of higher concentration of Neem resin than with other fixatives. However, such changes were relatively small under the condition of 4% concentration. It was also confirmed that chromaticity and glossiness vary greatly between before- and after-application of the fixatives but that such discrepancies tend to decrease at 4% concentration compared to other concentrations. As for fixation strength, it was found that the fixation capacity of Neem resin on the base and painting layers is overall higher than other fixatives as the concentration is increased. Therefore, the applicability of 4% concentration of Neem resin as a fixative on the painting layer was confirmed considering the low surface changes according to environmental factors, low color discrepancy and glossiness, and characteristics of excellent fixation strength. It is believed that the findings of this study could be used as basic data for the preservation of Payathonzu temple mural paintings in the future.

• Culinary science and hospitality research
• /
• v.17 no.1
• /
• pp.248-258
• /
• 2011

To analyze die quality characteristics of loaf bread added with waxy black rice flour by its storage period, this study stored loaf bread made of wheat flour added with 10% 20% 30% and 40% of waxy black rice flour for 4 days while measuring water activity, pH, chromaticity and texture. The results of die study are as follows. Based on die results of measurements of water activity of loaf bread added with waxy black rice flour by storage period, die control group and die groups added with 10% and 20% of waxy black rice flour showed significantly low water activity from the $3_{rd}$ day of storage and die groups added with 30% and 40% of waxy black rice flour from the $2_{nd}$ day of storage. As for pH changes over the storage period, only die group added with 40% of waxy black rice flour showed significant pH decreases from die $3_{rd}$ day of storage while the control group and the groups added with 10% and 30% of waxy black rice flour showed significant pH decreases from die $2_{nd}$day of storage. As for the pH of each group of loaf bread by storage days, die loaf bread added with 40% of waxy black rice flour showed significantly higher pH compared to the control group. Brightness decreased significantly from the 2nd day of storage and die yellowness from the $3_{rd}$ day of storage. As for chromaticity changes by storage days, as die amount of added waxy black rice flour increased, L values and b values decreased while redness values significantly increased. Over die storage period, hardness, gumminess and chewiness increased and die waxy black rice flour added groups showed lower increase rates compared to die control group. Especially, die groups added with 30% and 40% of waxy black rice flour showed low hardness changes. Springiness level was decreased as die addition rate of waxy black rice flour was increased, and the group added with 40% of waxy balck rice flour showed die lowest springiness level. It also showed lower cohesiveness up to the 3rd day of storage compared to die day of manufacturing. Therefore, it could be seen that die loaf bread made from wheat flour added with 30% of waxy black rice flour showed better quality feature until die $3_{rd}$ day of storage than die other experimental groups.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.549-561
• /
• 2020

This study aimed to assess the performance and life of nine natural mineral dancheong pigments: Seokganju, Jinsa, Hwangto, Jahwang, Wunghwang, Seokrok, Noerok, Seokcheong, and Baekto. The design of the accelerated weathering test considered the domestic climate characteristics and the location of Dancheong. Outdoor weathering tests were conducted at the Research Institute in Daejeon and the Sungnyemun Gate in Seoul to confirm the field reproducibility of the accelerated weathering test. Monitoring of the physical changes in pigments through accelerated and outdoor weathering tests are based on ultraviolet exposure dose. Despite small cracks at the beginning of the tests, the monitoring showed that Seokganju and Baekto had no marked physical changes, but the surface cracks of Jinsa and Seorok continue to expand. Hwangto and Noerok were marked with water or were resin stained, and the particles of Jahwang, Wunghwang, and Seokcheong had lost their luster. Despite the absolute difference in color change in each test, the final chromaticity change patterns of pigments were similar in that the color difference between Baekto and Noerok was below five, and Jina was above 28. The physical and surface color pigment changes were more concentrated in outdoor weathering tests than in accelerated tests, and the Seoul site was more intense than the Daejeon site. This is because outdoor weathering tests are exposed to severe variations of temperature and moisture or deposition of dust particles and, in the case of Seoul, the site is more exposed to the external environment than the Daejeon site.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.511-526
• /
• 2018

Effects of heat treatment on the characteristics of Royal paulownia (Paulownia tometosa) wood were investigated. The results were compared with those of Suwon silver poplar (Populus tementiglandulosa) and Korean red pine (Pinus densiflora) woods. The wood samples of the three species were treated at $160^{\circ}C$, $180^{\circ}C$, $200^{\circ}C$ and $220^{\circ}C$ in an electric furnace for 2 hours. The changes of color, density, mass loss, and relative crystallinity were investigated before and after heat treatment. The lightness ($L^*$) decreased rapidly from $200^{\circ}C$ in all species. There were no change in red-green chromaticity($a^*$) and yellow-blue chromaticity($b^*$) of Royal paulownia and poplar woods with increasing temperature. Whereas, yellow-blue chromaticity($b^*$) of Korean red pine wood decreased sharply from $200^{\circ}C$. Royal paulownia wood showed appreciable color change(${\Delta}E^*$) after heat treatment above $180^{\circ}C$. Poplar and pine woods, however, presented significant color change from $160^{\circ}C$. Color change of the three wood species increased rapidly with increasing temperature. Mass loss of the three wood species by heat treatment was the highest in the Royal paulownia wood and the lowest in the pine wood. Mass loss and relative crystallinity increased and density decreased slightly with increasing temperature. Consequently, it is revealed that Royal paulownia wood showed considerable differences in the temperature of color change, weight loss and change of relative crystallinity compared to the other wood species.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.6
• /
• pp.305-310
• /
• 2009

$TiO_2$ thin films consisting of positively charged poly (diallyldimethylammonium chloride) (PDDA) and negatively charged titanium (IV) bis (ammonium lactato) dihydroxide (TALH) were successfully fabricated on a poly (methyl methacrylate) (PMMA) by layer-by-layer (LBL) self-assembly method. By the measurement of quartz crystal microbalance (QCM), it was found that as the solution pH of TALH decreased, the deposition volume of TALH increased and the thickness of (PDDA/TALH) thin film coated on the surface of PMMA particles increased. The PMMA particles coated with the coating sequence of (PDDA/TALH)n showed the variation of color changes as a function of the number of bilayer. The number of bilayer (n) of (PDDA/TALH) thin films was 10 and 20, the values of $a^*$ and $b^*$ decreased from those of PMMA particles without coating films and the color changes was shifted to green and blue direction in the $a^*$, $b^*$ chromaticity diagram. And then, the number of n increased to 30 and 40, the values of $a^*$ and $b^*$ increased and the color changes was shifted to red and yellow direction, respectively. Finally the PMMA particles coated with $(PDDA/TALH)_{50}$ thin film showed a little same value of $a^*$ and $b^*$ with the PMMA particles without (PDDA/TALH) thin film.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.788-799
• /
• 1999

This study was performed to investigate the effect of mordants on the dyeability colorfastness to light and to laundering and biological properties of mordanted and natural-dyed cotton and silk substrates. Natural red dyes were extracted from Caesalpinia Sappan L. (Sappan wood) and Rubia Akane Nakai (Madder) by boil water Five different compounds of Al, Cr, Cu, Fe and Sn were used as mordanting agents. The result of this study are sumarized as follows ; 1. In the of the fabrics mordanted and dyed with sappan wood K/S value increases and λmax shifts to the longer wavelength as mordant concentration increases. Color of the fabrics dyed with sappan wood and madder change to redder bluer and lighter after mordanting. 2. As the number of repetition of dyeing-mordnating process increase the color of the dyed fabrics tend to be redder bluer and darker. Mordanted dyes with Al and Sn make chroma increase. The quantity of mordant absorbed in the silk fabric increase as mordant concentration increase. More Fe is absorbed in silk than Cr is. 3. After being exposed to light the fabrics dyed with sappan wood and madder change to less red Fe and Cu mordanting yeild better colorfastness to light than others does. Natural-dyed fabrics exposed to light tend to be faded and whitened in CIELAB chromaticity co-ordinates. So we might trace back the original color of ancient faded fabrics by changes in color of natural dyes. 4. After washing the colors of natural dyes change to more blue, Fe and Cu mordanting give better colorfastness to wash than others do. 5. The soil-burial cotton is more susceptible to mildew and rot than the silk is. Antimicrobial activity of the natural-dyed cotton can be enhanced by Cu and silk can be enhanced by Cu and Cr mordanting respectively.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.5
• /
• pp.698-705
• /
• 2011

In this study, brown rice and germinated brown rice which has various medical action and excellent functionality, was used together with Jeung-pyun to compare and analyze the changes according to the amount 50, 100%. This study is intended to be used for the healthy food and spread to that was executed to find out the merchandising potential of this Jeung-pyun. The Jeung-pyun was added to brown rice and germinated brown rice of moisture content was 50.23~51.70% the similar to content. For chromaticity to L(lightness) value, a(redness) value and b(yellowness) value, L value of GBR2 was low at 58.84. a value was showed the highest GBR at 0.64. For texture, Hardness was showed the highest GBR2. Springiness was showed the highest BR2. Chewiness was showed the highest Control at 4.33. As for adhesiveness, there was showed the highest GBR2 at 0.30 and showed significant difference between samples. Overall-acceptability was the order of good in the estimated: GBR1>BR2>BR1>GBR2>C. Based on this study, from the physico-chemical and sensual perspective, For the preference of GBR1 was most preferred for flavor, color and taste, sensory evalution and considered suitable the best method for adding brown rice and germinated brown rice into Jeung-pyun.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.223-232
• /
• 2014

The feasibility of a virtual colored overlay is based on constraints of computer and user preference and it is evaluated for people with Scotopic Sensitivity Syndrome. We draw ${\alpha}$ and chromaticities of virtual colored overlay which will be implemented on IT devices by measuring optical characteristics of 2 representative film overlays and simulating them. We analyzed the influence of two illuminating conditions on the virtual colored overlay. We find that it is possible to get the multiple combinations of alpha and source RGB values to match a chromaticity which is presented in CIE-Luv color space under ideal white condition of display, a user can select one among them with respect to clarity and comfort. Under 100 lx difference of illumination conditions, the changes of chromaticities are negligible, but luminances are increased $37.8cd/m^2$ average(std 2.006) at high illumination condition.

• Korean journal of food and cookery science
• /
• v.26 no.5
• /
• pp.665-675
• /
• 2010

This study applied high-pressure extraction cooking, which has been proven superior in processibility and stock extraction, for the preparation of stock, which is widely used as a basic material of dishes, and examined the physicochemical and sensory properties of the extracted stock by adding salt. We observed changes in the chromaticity of brown stock according to salt content, and pH decreased with increased the salt content, suggesting that stock was acidified. Regarding the mineral content, Na was the highest, followed by K and P. Regarding total free amino acid content, the content of essential amino acids, enhancing free amino acids, and other amino acids also showed the highest level in S2, which contented 0.3% salt. In the sensory test, saltiness grew stronger with an increase in salt content, and overall palatability was highest in S2. Regarding ranking, preference was highest for S2. Utilize to data that study finding of above is actual in development for mass production of brown stock product licensed cooks' traditional mesh dipper technology quality that make mass production direction that change and normalizes product that can keep excellent taste and improve conservative property develop. Culture formation and our country foodservice industry development that reduce damage of informed people ashes through development of brown stock product that is changed in large quantity, and improve quality of food more positively contributing to reappear diversification of menu, systematization and taste of specialty store as well as can contribute in rationalization of informed people ashes purchase, personnel expense (labor power) curtailment, waste decrease etc. but is developed still more being utilized.