• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.104-112
• /
• 2012

Recently, the HDR imaging technique that mimics human eye is incorporated with LCD/LED display devices to deal with mismatch between the real world scene and the displayed image. However, HDR image has a veiling glare limit as well as a scale of the local contrast problem. In order to overcome these problems, several color correction methods, CSR(center/surround Retinex), MSR (Multi-Scale Retinex), tone-mapping method, iCAM06 and so on, are proposed. However, these methods have a dominated color throughout the entire resulting image after performing color correction. Accordingly, this paper presents a new color correction method using dynamic cone response function. The proposed color correction method consists of tone-mapping and dynamic cone response. The tone-mapping is obtained by using a linear interpolation between chromatic and achromatic. Thereafter, the resulting image is processed through the dynamic cone response function, which estimates the dynamic responses of human visual system as well as deals with mismatch between the real scene image and the rendered image. The experiment results show that the proposed method yields better performance of color correction over the conventional methods.

• Science of Emotion and Sensibility
• /
• v.20 no.2
• /
• pp.137-148
• /
• 2017

The present study examined the effect of stimulus contrast and color on detection of a target embedded in streams of letters. In Experiment 1, each trial displayed four rapid serial visual presentation (RSVP) streams of letters (i.e., multi-RSVP), and each stream occupied one of four different locations. Each frame in the RSVP stream had four white distractors at the locations except one frame where a dim grey target was displayed at a location with three white distractors at the remaining locations. In the low-visibility target condition, the target's grey color was slightly darker than the background grey whereas much dimmer in the high-visibility condition. Participants were asked to report presence of a predesignated target as quickly and accurately as possible upon its detection in each trial, and their target detection turned out more accurate and quicker in the high-visibility than the low-visibility condition. In Experiment 2, the same RSVP displays and task as Experiment were used, but the grey target letters in the high-visibility condition were replaced with those of distinct chromatic colors. Participants detected target presence more accurately in the high-visibility condition, but the reaction time did not differ between the visibility conditions. The results indicate that higher stimulus contrast as well as distinct color can improve perception of a target stimulus displayed among visually-demanding background, but also suggest that stimulus contrast may play a more substantial role for such perceptual improvement.

• Science of Emotion and Sensibility
• /
• v.16 no.3
• /
• pp.351-362
• /
• 2013

This study aims to investigate the characteristics of Chinese consumers, who are growing up as the global biggest consumption market, according to G sensibility types, and to provide the data base for China market by analyzing the consuming pattern per sensibility and the preferred color. For the investigation, the survey on G sensibility and consuming pattern was conducted for consumers in four cities of China. As a result of classification of G sensibility types, it was found that Chinese consumers tended to behave in accordance with their values and identities and the most general type in them was G1 pursuing the reasonable and logical consumption, unlike Korean consumers who tended to be shown as G3 for the most general type according to the preceding study. As to characteristic of consumption, Chinese consumers preferred to purchase clothes from the department store, and in case of G2 type, the characteristics was corresponded with Actionist's character which shows the wide range of behavior and high-consumption, by preferring the road-shop next to the department store. Chinese consumers tended to purchase the clothes on the basis of their preferred colors, and especially it was shown that achromatic color was very commonly preferred. Also the black color was on the highest preference, and white, dark gray and light gray were followed. Meanwhile, in chromatic color, it was found that brown, orange, red and blue were preferred in order, and in case of G4, it was found that they preferred more various colors compared to the other types. This result could be used as the data base for the marketing strategy of fashion design industry and the related companies, as well as the new communication method for the consumers.

• Korean Journal of Optics and Photonics
• /
• v.29 no.6
• /
• pp.268-274
• /
• 2018

In this study we suggest a humidity-sensitive color sensor using a one-dimensional photonic crystal and Hong Kong University of Science and Technology-1 (HKUST-1), which is a metal-organic framework (MOF) substance. One-dimensional photonic crystals have a photonic band gap, due to a periodic refractive-index change, and block and reflect light components in a specific wavelength band. The refractive index of HKUST-1 differs in dry and humid environments. Herein we designed a sensor using the presence of the photonic band gap, with FDTD simulation. As a result of optical analysis, the color conversion of the reflected light was superior to the color conversion of the transmitted light. When the center wavelength of the photonic band gap was 550 nm, the maximum peak value of the wet environment increased by a factor of about 9.5 compared to the dry environment, and the color conversion from achromatic to green was excellent as a sensor. The results of this study suggest the application of MOF materials to moisture sensors, and the nanostructure design of MOF materials will expand the applications to industrial devices.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.775-792
• /
• 2015

Person re-identification is an important and challenging task in computer vision with numerous real world applications. Despite significant progress has been made in the past few years, person re-identification remains an unsolved problem. This paper presents a novel appearance-based approach to person re-identification. The approach exploits region covariance matrix and color histograms to capture the statistical properties and chromatic information of each object. Robustness against low resolution, viewpoint changes and pose variations is achieved by a novel signature, that is, the combination of Log Covariance Matrix feature and HSV histogram (LCMH). In order to further improve re-identification performance, third-party image sets are utilized as a common reference to sufficiently represent any image set with the same type. Distinctive and reliable features for a given image set are extracted through decision boundary between the specific set and a third-party image set supervised by max-margin criteria. This method enables the usage of an existing dataset to represent new image data without time-consuming data collection and annotation. Comparisons with state-of-the-art methods carried out on benchmark datasets demonstrate promising performance of our method.

• Journal of the Korean Ceramic Society
• /
• v.52 no.1
• /
• pp.41-47
• /
• 2015

Celadon shards from Gangjin and Buan were analyzed for their color, chemistry and microstructures. They exhibited similar chromatic characteristics in a $CIEL^*a^*b^*$ analysis. All of the glazes assessed showed comparable compositional areas, while the bodies from Gangjin shards had higher $RO_2$ concentrations. A high degree of similarity was also noted in the microstructures of the glaze and bodies from both regions. Anorthite crystals appeared in the glaze layer, and phase separation behavior developed around these crystals. This may have been caused by the glaze chemistry and the sintering process given the lengthy heating and cooling time. A Raman analysis indicated higher isolated $SiO_4$ unit ($Q_0$) values for the Buan samples. This can stem from the higher firing temperature or the longer sintering process.

• The Research Journal of the Costume Culture
• /
• v.26 no.5
• /
• pp.793-805
• /
• 2018

At the beginning of the $20^{th}$ century, Cartier developed Art Deco jewelry designs that have been used as design inspirations to this day. The purpose of this study is to analyze the characteristics of the Art Deco jewelry designs of Cartier in the early $20^{th}$ century. Regarding the research method, this study explored the jewelry designs from 1904 to 1939 by extracting 288 analysis subjects from Cartier's exhibitions, auction picture books, and foreign books, and analyzed the characteristics in terms of design motifs, colors and materials. The results of the study are as follows. Regarding the design motifs, 73% were geometric motifs, and 66% were a combination of circular shapes and polygons, the most frequent. In terms of colors, 69% were chromatic in color, and vivid colors were mostly used in the order of red (24%), - green (19%), and - blue (14%). Of the materials, 92% of the metals consisted of platinum, and gemstones were used in the order of diamonds (41%), - onyx (13%), - emeralds (11%), - rubies (9%), and - sapphires (8%). In the early $20^{th}$ century, Cartier's Art Deco jewelry designs featured abstract and geometric motifs, vivid colors and strong contrasts, platinum and precious gemstones. This study is meaningful in that it explores the competitiveness of Cartier's designs and provides practical ideas to combine Art Deco style with contemporary jewelry designs successfully.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.2
• /
• pp.139-143
• /
• 1998

The occurrence and physico-chemical properties of flat leaves found in 1997 curing trial related to the prevention of occurrence of flat leaves at bulk curing of flue-cured tobacco were investigated and compared with those of normal leaves. Cured leaves of NC82 were separated into 4 classes of none, slight, fair and severe symptoms of flat leaf by the percentage of flattened parts to whole leaf area. The flat leaves were mostly found among the leaves of lower stalk position, and it was estimated that growth rate of lower leaves also influenced on the occurrence of flat leaves. In chromatic aberration of cured leaf, flat leaves showed remarkably lower b and L values than in those of normals but there was no difference in a value. On the other hand, in chemical analyses of flat leaf samples, nicotine, total sugar, ether extract and total nitrogen contents were decreased with the degree of flat symptoms. In physical properties, filling capacity of cured leaves was decreased with the degree of flat symptoms comparing with those of normal leaves, while shatter index was showed a reverse tendency, and then within the same leaf, flat parts were decreased in total sugar, ether extract and filling capacity compared with those of normal ones, but remarkably increased in shatter index, and there was no difference in nicotine and total nitrogen contents.

• The Research Journal of the Costume Culture
• /
• v.13 no.2 s.55
• /
• pp.289-299
• /
• 2005

Through the formative analysis of the traditional jokakbo, we have composed surface composition that was made by a perfect square, triangle, a weather vane type, vertical type, cintamani type, and a mixed rectangular. And we have composed 18 kinds of motif stimulants that was made by vivid tone, pale tone, and so on, and finally analyzed sensibility image, preference rate of them. The cause of composition for the sensibility image of stimulant was composed by the cause of simplicity characteristics, interesting characteristics, rigid-flexibility characteristics, and modern characteristics. And from these things, the cause of simplicity characteristics and the cause of interesting characteristics were revealed as important dimensional factors of sensibility image. The sensibility image of motif was revealed as a simple image of perfect square, a feminine image of cintamani type, a modern image of mixed rectangular. And black-white colored mixed rectangular and chromatic colored cintamani type were also revealed as an interesting image. The preference rate of motif is related with the cause of interesting characteristics and simplicity characteristics, it also has been revealed to prefer the pale tone than others. And it also has been revealed that achromatic colored mixed rectangular, cintamani type of vivid tone, perfect square and rectangular of pale tone were mostly preferred.

• Tribology and Lubricants
• /
• v.35 no.3
• /
• pp.151-157
• /
• 2019

Insulated oil degradation produces charged by-products, such as acids and hydro-peroxides, which tend to reduce the insulating properties of the oil. In this study, UV-vis spectroscopy measurement technology is developed and experimentally compared with other measurement methods, such as the titration method and IR spectroscopy, to validate its ability to monitor the degradation of electrical insulating paper. The degradation characteristics of the insulating paper are appropriately represented through various types of measurement methods, such as the Tan (delta) method, $CO_2$ gas production measurement, the titration method, and IR spectroscopy. The results are demonstrated to be well comparable to a change in the fluorescence emission ratio (FER), which is defined as the shift in fluorescence intensity in the measured wavelength range, and also to the chromatic ratio, which is defined as a color shift to longer wavelength ranges. The results also show that, by using UV-vis spectroscopy, it is possible to detect the degradation of the insulating paper. This study suggests that UV-vis spectroscopy can be applied as an alternative to high-performance liquid chromatography, which is the internationally recognized measurement technology for cellulose paper degradation. The FER detector is also verified to be useful as an effective condition-monitoring device for power transformers.