• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.460-462
• /
• 2004

The control of the data retention time is a main issue for realizing future high density dynamic random access memory. There are several leakage current mechanisms in which the stored data disappears. The mechanisms of data disappear is as follow, 1 )Junction leakage current between the junction, 2) Junction leakage current from the capacitor node contact, 3)Sub-threshold leakage current if the transfer transistor is affected by gate etch damage etc. In this paper we showed the plasma edge damage effect to find out data retention time effectiveness. First we measured the transistor characteristics of forward and reverse bias. And junction leakage characteristics are measured with/without plasma damage by HP4145. Finally, we showed the comparison TRET with etch damage, damage_cure_RTP and hydrogen_treatment. As a result, hydrogen_treatment is superior than any other method in a curing plasma etch damage side.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.305-308
• /
• 2002

This paper proposes a control board that includes PNP function with extensibility and effective allocation of allocation. The object of study is to overcome limited extensity of old systems and it is to reuse the system. The system recognizes automatic subsystem from application of main system with board level that is using hardware and software co-design method. The system has both function of main-board and sub-board. So one system can operate simultaneously such as module of alien system. This system has advantages that are fast execution, according as process functional partition to hardware/ software co-design and board size is reduced as well as offer extensity of development system. We obtained good result with control board for existent Z-80 training kit.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.395-398
• /
• 2004

High-linearity voltage-controlled current sources (VCCSs) circuits for wide voltage-controlled oscillator and automatic gun control were proposed. The VCCS consists of emitter follower for voltage input, two common-base amplifier which their emitter connected for current output, and current mirror which connected the two amplifier for large output current. The VCCS used only five transistors and a resistor without an extra bias circuit. Simulation results show that the VCCS has current output range from 0mA to 300mA over the control voltage range from 1V to 4.8V at supply voltage 5V. The linearity error of output current has less than $1.4\%$ over the current range from 0A to 300mA.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.459-462
• /
• 2004

In this paper, we present a reducing power consumption of a scheduling for module selection under the time constraint. A a reducing power consumption of a scheduling for module selection under the time constraint execute scheduling and allocation for considering the switching activity. The focus scheduling of this phase adopt Force-Directed Scheduling for low power to existed Force-Directed Scheduling. and it constructs the module selection RT library by in account consideration the mutual correlation of parameters in which the power and the area and delay. when it is, in this paper we formulate the module selection method as a multi-objective optimization and propose a branch and bound approach to explore the large design space of module selection. Therefore, the optimal module selection method proposed to consider power, area, delay parameter at the same time. The comparison experiment analyzed a point of difference between the existed FDS algorithm and a new FDS_RPC algorithm.

• Communications for Statistical Applications and Methods
• /
• v.22 no.6
• /
• pp.639-646
• /
• 2015

We propose simultaneous tests for mean and variance under the normality assumption. After formulating the null hypothesis and its alternative, we construct test statistics based on the individual p-values for the partial tests with combining functions and derive the null distributions for the combining functions. We then illustrate our procedure with industrial data and compare the efficiency among the combining functions with individual partial ones by obtaining empirical powers through a simulation study. A discussion then follows on the intersection-union test with a combining function and simultaneous confidence region as a simultaneous inference; in addition, we discuss weighted functions and applications to the statistical quality control. Finally we comment on nonparametric simultaneous tests.

• Journal of the Korean Chemical Society
• /
• v.44 no.1
• /
• pp.87-91
• /
• 2000

• Journal of the Korean Geographical Society
• /
• v.34 no.5
• /
• pp.493-505
• /
• 1999

본 연구의 목적은 정기시장을 이용하는 이동 상인과 소비자의 특성을 분석하여, 정기시장의 중심지 기능과 공간 구조를 이해하려는 것이다. 충청북도 영동군 지역을 사례로 해서 8개의 정기시장을 이용하는 상인에 대한 면접 조사와 소비자에 대한 설문 조사를 통해서 자료를 수집하였다. 정기시장의 연구는 경제-입지적 접근 방법이나 사회-문화적 접근 방법으로 행해지지만, 정기시장의 기능을 상인과 소비자의 두 측면에서 모두 고려할 필요가 있다. 본 연구에서 고차위 중심지에 위치한 정기시장은 규모가 커진 반면, 저차위 중심지에 위치한 정기시장은 쇠퇴하고 있는 것이 확인되었다. 정기시장을 유지시켜 왔던 사회적 관성과 비교 우위는 농촌의 근대화 과정에서 점차 사라지고 있으며, 이러한 사회경제적 변화가 정기시장을 쇠퇴시키고 있다.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.235-238
• /
• 2003

This paper presents an ZVT(Zero Voltage Transition) Forward Converter using Primary Auxiliary Circuit operation. An auxiliary resonant circuit was added to the basic forward converter, implementing the fVT technique for the main switch. The switch employed by the auxiliary circuit operates under Zero-Current-Switching(ZCS) condition. The complete operating principle, simulation and experimental results are presented

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.11-16
• /
• 2001

Recent publications showed that a pair of neighboring printed circuit board (PCB) windings can be used as a contactless energy transfer device. As a continued study on this area, the current paper presents the modeling, analysis, and application of the neighboring PCB windings with an emphasis on their circuit properties and device characteristics as a contactless energy transfer device. Theoretical results of the paper are confirmed with experiments on a prototype contactless energy transfer circuit that delivers 24W output power at $68\%$ efficiency through two 35mm-diameter PCB windings separated each other by 2.4mm.

• Communications for Statistical Applications and Methods
• /
• v.10 no.2
• /
• pp.575-583
• /
• 2003

We proposed imputation strategies for the Population and Housing Census 2000 in Korea. The total area of floor space and marital status which have relatively high non-response rates in the Census are considered to develope the effective missing value imputation procedures. The Classification and Regression Tree(CART) is employed to construct the imputation cells for hot-deck imputation, as well as to predict missing value by model-based approach. We compare three imputation methods which include CART model-based imputation, hot-deck imputation based on CART and logical hot-deck imputation proposed by The Korea National Statistical Office. The results suggest that the proposed hot-deck imputation based on CART is very efficient and strongly recommendable.