• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2534-2536
• /
• 2002

This paper presents the design of high speed bit and word processor for sequence logic control using a FPGA. This FPGA is able to execute sequence instruction during program fetch cycle, because the program memory was separated from the data memory for high speed execution at 40MHz clock. Also this processor has 274 instructions set with a 32bit fixed width, so instruction decoding time and data memory interface time was reduced. This FPGA was synthesized by V600EHQ240 and Foundation tool of Xilinx company. The final simulation was successfully performed under Foundation tool simulation environment. And the FPGA programmed by VHDL for a 240 pin HQFP package. Finally the benchmark was performed to prove that the designed for bit and word processor has better performance than Q4A of Mitsubishi for the sequence logic control.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2740-2742
• /
• 2002

본 논문에서는 G7과제의 일부로 수행 중인 주거/사무환경에서 인간의 감성을 지표화하는 감성기반기술개발 연구과제에서 생성된 피험자의 생리신호 및 주관적 감성평가 데이터를 관리하기 위한 감성정보관리 시스템을 설계하였다. 제안한 감성정보관리시스템에서는 사용자에게 정교한 GUI와 높은 응답성을 제공하기 위해 2계층 클라이언트/서버 (2-tier client/server) 구조를 기본적으로 사용하고 있으며, 감성정보의 조회 부분은 외부 사용자에게 접근의 용이함을 제공하기 위해 웹 인터페이스를 추가적으로 지원하였다. 그리고 대용량 생리신호(EEG) 데이터를 병렬 전송한 다음, 데이터베이스에 저장하기 위해서 서버 쪽에 일부 응용논리를 배치하였다.

• Elastomers and Composites
• /
• v.29 no.2
• /
• pp.113-120
• /
• 1994

The vulcanization characteristics, physical and electrical properties have been measured for magnetite-loaded CM compounds containing various concentration of magnetite. Samples of the various concentration of magnetite are characterized by oscillating disk rheometer, mooney viscometer, tensometer and resistance meter. The morphology and dispersion of magnetite are analyzed by scanning electron microscope(SEM). The results obtained are as follows : 1. The CM compound without magnetite shows plain curve, while the CM compounds containing magnetite show short curves. 2. The maximum volume of magnetite is 600 phr in the CM compounds. The magnetite of 30 to 150 phr of magnetite act as reinforcement agents and the 50 phr magnetite shows maximum tensile strength. 3. The electric conductivity is mostly influenced by the conditions of temperature, compacting pressure, and magnetite orientation. Further efforts should be made to develop a new design in various electric conductivity fillers for the most efficient and applicable rubber products.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4E
• /
• pp.31-36
• /
• 1999

Circulant Feedback Delay Networks (CFDN's), whose feedback matrix is circulant to control the stability of system and time-frequency response easier than unitary one, were recently proposed. However, the drawback of this structure is that the flatness of the frequency response of CFDN's is not enough and it is difficult to adjust the placement of zeros to decrease this problem. Therefore, we propose Modified CFDN's (MCFDN's) consisted of a general recursive filter and CFDN's to maintain maximally the impulse response of CFDN's and improve the flatness of frequency response without adjusting the placement of zeros. The delay unit of a general recursive filter's feedback loop is replaced by CFDN's, are omitted the direct path. We represent the usefulness of MCFDN's to build artificial reverberators and the main parameter to determine characteristics of MCFDN's in this paper.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.217-224
• /
• 2005

A light-guide plate of an LCD backlight coupled with a microfresnel lens array (MFLA) is designed and analyzed. Computer simulated results of optical characteristics of our MFLA-type light-guided plate compared with the conventional prism-type one are presented. We show that the MFLA-type light-guide plate can replace well the conventional prism-type plate.

• Korean Journal of Optics and Photonics
• /
• v.17 no.6
• /
• pp.525-531
• /
• 2006

Synthesized 3-D CGH of a general three dimensional object is obtained by using a new 3-D coordinates transformation technique. A CCD camera is used to record several projected images of the 3-D object from different viewing angles. The recorded data are numerically calculated and processed to yield two-dimensional complex functions, which are then encoded fer the final synthesized 3-D CGH.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1994.03a
• /
• pp.88-89
• /
• 1994

• Journal of the Korean Society of Safety
• /
• v.22 no.3 s.81
• /
• pp.74-80
• /
• 2007

In this study, a documentary survey, face mapping, and stability analysis were performed on the collapsed colluvial soil slope. The purpose of this paper is to identify the cause of slope failure and determine slope stability for similar areas. Boring samples were extracted from the slump and laboratory tests were performed to find out the cause of slope failure. In addition, the limit equilibrium method was used in order to determine the stability of the slope. As a result of this investigation and the analysis of data, the type of collapse and cause of slope failure have been shown to have a strong correlation with the natural geographical and geological features which make up the collapse profile of the study area. These results will help to develop guidelines for formulating countermeasure methods.

• Fashion & Textile Research Journal
• /
• v.1 no.3
• /
• pp.239-245
• /
• 1999

The purpose of this study is to suggest the direction of the future fashion by grasping the cyber fashion, which is discussed outstandingly in the recent fashion world, into internal expression and external features. The result of this study is as follows: Cyber fashion means the application of the electronic image, dynamic phenonmenon of machine, and the effects of light to fashion, and it has some external features of geometrical pattern, dynamic structure, and high-tech material and color: Aside from this noticeable characteristics, cyber fashion has some internal features of the direction toward future, the anti-culture, and the surreal. In this cyber fashion, first, computer will be introduced and used as the means to realize a dream of human being. Second, it will be designed with the ideal feature of future society. Third, it will be possible to develope material and design to solve ecological issue of human beings. Fourth, the fashion to give the peace and stability to human being will be popular.

• Journal of Magnetics
• /
• v.6 no.3
• /
• pp.77-79
• /
• 2001

The semi-empirical superposition model has been applied to calculate the zero field splitting parameters of $Mn^{2+}$ion in $LiTaO_3$ single crystal, assuming that $Mn^{2+}$ion occupies one of two possible sites: $Li^{l+} \;or\; Ta^{5+}$ site, respectively. The 2nd-order axial zero field splitting parameters are $958\times10^{-4}cm^{-1}\; at\; Li^{1+}$ site and $193\times 10^{-4}cm^{-1} \;at\; Ta^{5+}$ site for $Mn^{2+}$ions. The 4th-order zero field splitting parameters at $Li^{l+} \;and\; Ta^{5+}$ sites are also determined. These calculated zero field splitting parameters are very important to determine the substitutional sites of doped impurity ions in $LiTaO_3$ crystal.