• Smart Structures and Systems
• /
• 제12권6호
• /
• pp.641-659
• /
• 2013

In this paper is studied the influence of the uncertain mass distribution over the floors on the choice of the optimal parameters of a hybrid control system for tall buildings subjected to wind load. In particular, an optimization procedure is developed for the robust design of a hybrid control system that is based on an enhanced Monte Carlo simulation technique and the genetic algorithm. The large computational effort inherent in the use of a MC-based procedure is reduced by the employment of the Latin Hypercube Sampling. With reference to a tall building modeled as a multi degrees of freedom system, several numerical analyses are carried out varying the parameters influencing the floors' masses, like the coefficient of variation of the distribution and the correlation between the floors' masses. The procedure allows to obtain optimal designs of the control system that are robust with respect to the uncertainties on the distribution of the dead and live loads.

• Communications for Statistical Applications and Methods
• /
• 제6권2호
• /
• pp.543-564
• /
• 1999

The principal aim of a sequential phase I clinical trial in which the toxicity reponses of a group of patient(s) determine the dose level of the next patient(s) group is to estimate the maximal tolerated dose(MTD) of a new drug, In this paper we compared with a simulation study the performance of the MTD estimates that are determined by a stopping rule in a design and also those that are determined by analyzing the data after a clinical trial is terminated. To the latter belong the mean median mode and maximum likelihood estimates. For the Standard Methods the stopping rule MTD is quite inefficient but the median MTD has a best efficiency and is robust with respect to the three different toxicity curves. The problem of non-convergence of MLE MTD is severe. A more improved MTD estimate is produced by combining the advantages of the various MTD estimates and its efficiency is better than the single median MTD estimate especially for the toxicity curve of an unlucky choice of dose levels. The simulation results suggest that simple types of phase I designs can be combined with relatively standard analytic techniques to provide a more efficient MTD estimate.

• 아태비즈니스연구
• /
• 제9권2호
• /
• pp.1-13
• /
• 2018

Physics simulation is an important part of many interactive 2D applications and collision detection and response is key component of this simulation. While methods for reducing the number of collision tests that need to be performed has been well researched, methods for performing the final checks with collision primitives have seen little recent development. This paper presents a new collision primitive, the n-arc, constructed from piecewise circular curves or biarcs. An algorithm for performing a collision check between these primitives is presented and compared to a convex polygon primitive. The n-arc is shown to exhibit similar, though slightly slower, performance to a polygon when no collision occurs, but is considerably faster when a collision does occur. The goodness of fit of the new primitive is also compared to a polygon. While the n-arc often gives a looser fit in terms of area, the continuous tangents of the n-arcs makes them a good choice for organic, soft or curved surfaces.

• Journal of International Society for Simulation Surgery
• /
• 제4권1호
• /
• pp.13-16
• /
• 2017

Fibular free flap reconstruction is the flap of the choice in long-span mandibular bone reconstruction. The most common disadvantage of the fibular flap is short bone height to install dental implant. Double barrel fibular flap has been tried, however, bulky flap in the oral cavity hinder its use. Titanium reconstruction plate has been used simultaneously with the free fibular flap to stabilize occlusion and to fix the fibular flap. In this study, titanium reconstruction plate was fixed in the lower border of the mandible and the fibular free flap was fixed in the superior border of the titanium plate to improve implant-crown ratio. This new technique improved the longevity of the dental prosthodontics with dental implants.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.504-512
• /
• 2003

Simulation programs have been developed and used as an attempt to improve the accuracy of Non-Destructive Evaluation(NDE) techniques. The applicability of these programs is very limited, however, because it is difficult to describe the delicacy of the propagation of stress waves. To investigate the applicability of the finite element analysis for stress wave-based NDE techniques numerical simulation for Impact-Echo method and SASW method is performed. The numerical studies are performed to determine the essential parameters such as contact time of impact load, mesh size and time step size. These studies show that the choice of parameter is very important for improving the accuracy and confidence of the numerical procedure and, thereby, the applicability of the numerical analysis for stress wave-based NDE techniques

• Journal of Construction Engineering and Project Management
• /
• 제5권4호
• /
• pp.12-15
• /
• 2015

Size of building has a direct relationship with building cost, energy use and space maintenance cost. Therefore, minimizing building size during a project development is of paramount importance against such wastes. However, incautious reduction of building size may result in crowded space, and therefore harms the functionality despite the fact that building is supposed to satisfactorily support users' activity. A well-balanced design solution is, therefore, needed at an optimum level that minimizes building size in tandem with providing sufficient space to maintain functionality. For such design, architects and engineers need to be informed accurate and reliable space-use information. We present in this paper a conceptual framework of an agent-based space-use prediction simulation system that provides individual level space-use information over time in a building in consideration of project specific user information and activity schedules, space preference, ad beavioural rules. The information will accordingly assist architects and engineers to optimize space of the building as appropriate.

• Journal of Electrical Engineering and Technology
• /
• 제5권3호
• /
• pp.415-422
• /
• 2010

The distributed flexible alternative current transmission system (D-FACTS) is a recently developed FACTS technology. Distributed Static Series Compensator (DSSC) is one example of DFACTS devices. DSSC functions in the same way as a Static Synchronous Series Compensator (SSSC), but is smaller in size, lower in price, and possesses more capabilities. Likewise, DSSC lies in transmission lines in a distributed manner. In this work, we designed a fuzzy logic controller to use the DSSC for enhancing transient stability in a two-machine, two-area power system. The parameters of the fuzzy logic controller are varied widely by a suitable choice of membership function and parameters in the rule base. Simulation results demonstrate the effectiveness of the fuzzy controller for transient stability enhancement by DSSC.

• 경영과학
• /
• 제32권2호
• /
• pp.125-143
• /
• 2015

When studying the film industry, researchers have seldom addressed the dynamic interaction between marketing information and word of mouth in the motion picture industry mainly because of the limitation of traditional research methodologies. This study explores integration and competition among important variables influencing on audience's choice on movie selection, particularly by using a new method of agent-based modeling including competitive environment. Decision process of moviegoer composed of transition probability based on multinomial logit model, considering marketing and box-office information, critique, and word of mouth from other moviegoers. After validating the fitness of market share among released movies, this study conducted a set of simulation experiments considering several variables such as market size, change of weight between variables, and movie performance under competition. Propositions are derived from the simulation results is also suggested for future research.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2004년도 추계학술대회 및 정기총회
• /
• pp.143-146
• /
• 2004

In a situation that rank order information on attribute weights is captured, two solution approaches are presented. An exact solution approach via interaction with a decision-maker pursues progressive reduction of a set of non-dominated alternatives by narrowing down the feasible attribute weights set. In approximate solution approach, on the other hand, three categories of approximate methods such as surrogate weights method, the dominance value-based decision rules, and three classical decision rules are presented and their efficacies in terms of choice accuracy are evaluated via simulation analysis. The simulation results indicate that a method, which combines an exact solution approach through interactions with the decision-maker and the dominance value-based approach is recommendable in a case that a decision is not made at a single step under imprecisely assessed weights information.

• 대한안전경영과학회지
• /
• 제11권3호
• /
• pp.139-148
• /
• 2009

In a real-life supply chain environment, demand forecasting is usually represented by probabilistic distributions due to the uncertainty inherent in customer demands. However, the customer demand used for an actual supply chain planning is a single deterministic value for each of periods. In this paper we study the choice of single demand value among of the given customer demand distribution for a period to be used in the supply chain planning. This paper considers distributed multi-echelon supply chain and the objective function of this paper is to minimize the total costs, that is the sum of holding and backorder costs over the distribution network under the service level constraint, by using demand selection scheme. Some useful findings are derived from various simulation-based experiments.