• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1258-1264
• /
• 2005

We determined the effect of chlorine dioxide ($ClO_{2}$) treatment on microbial growth and quality of saury. Saury samples were treated with aqueous $ClO_{2}$ at 3, 10, and 50 ppm. After the treatment, saury samples were stored at -20$^{\circ}C$ and 4$ ^{\circ}C$, respectively. Saury samples treated with $ClO_{2}$ had significantly lower total bacterial counts during storage. In particular, treatment of 50 rpm $ClO_{2}$ decreased total bacterial count most significantly among the $ClO_{2}$ treated saury samples. After 4 days, populations of total bacteria for the control reached 6.43 log CFU/g, while the sample treated with 50 ppm of $ClO_{2}$ had 5.47 log CFU/g at the 9th day of storage. $ClO_{2}$ treatment also delayed increase in the population of psychrotrophic bacteria on saury. The pH of saury samples decreased with increase of $ClO_{2}$ concentration. Volatile basic nitrogen (VBN) and thiobarbituric acid reactive substance (TBARS ) values of saury samples increased during storage, regardless of $ClO_{2}$ concentration. Sen-sory evaluation of saury samples showed that treatment with $ClO_{2}$ could improve the quality of saury. These results indicate that $ClO_{2}$ treatment could be useful in improving microbial safety and quality of saury.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.170-177
• /
• 2019

The aim of this study was to investigate the effect of different concentrations of chlorine dioxide ($ClO_2$) on sterilization and deodorization of food-holding cabinets under different exposure times. For the measuring sterilization and deodorization, a 6.5 L chamber and a 625 L cabinet with circulation systems were used. Two bacteria (Staphylococcus aureus KCTC1916 and Escherichia coli KCTC 1682) that were artificially inoculated in the plate respectively were put into the 6.5 L chamber and the 625 L cabinet. The $ClO_2$ gas was produced by ampules. In the 6.5 L chamber, neither of the two bacteria was detected after 24 hours treatment by $ClO_2$ gas. Moreover, the deodorization rate against ammonia and phenol was 94% and 70%, respectively, but deodorization against formaldehyde was not effective. When the concentration reached maximum (6 ampule, 4.6 ppm) levels in the cabinet, it lasted for approximately 2 h and then decreased slowly. When a circulator was used, the gas concentration was very low (6 ampule, 0.8 ppm) and the antibacterial activity against S. aureus and E. coli was low. The level of reduction against S. aureus and E. coli was 2.98 log CFU/plate and 6.06 log CFU/plate, respectively, in the cabinet after 24 h without a circulator. The reduction against S. aureus KCTC1916 and E. coli KCTC1682 was 2.69 log CFU/plate and 4.41 log CFU/plate for 24 h, respectively.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.7
• /
• pp.49-54
• /
• 2012

This study focuses on the decomposition of pentachlorophenol(PCP) by an electron beam (E-beam) process. To attain this objective, we investigated the reactive species generated from E-beam process during irradiation (reaction time 0.6 s) and G-values of PCP decomposition and effects of pH and $H_2O_2$ as an additive. The effect of pH values was independent on the decomposition of PCP. However, during E-beam irradiation a scavenging effect of added $H_2O_2$ (> 1mM) for the decomposition of PCP was shown, which was supported by the decreased amounts of $Cl^-$ produced by the decomposition of PCP. Meanwhile, oxalic acid and unidentified organic chlorine compounds as by-products were increased by the addition of $H_2O_2$. Thus, in order to enhance the efficiency of PCP decomposition, the E-beam process has to consider a proper concentration of $H_2O_2$ as a well-known source of strong oxidant hydroxyl radical.

• Journal of Nutrition and Health
• /
• v.17 no.4
• /
• pp.273-280
• /
• 1984

The blood components of diabetic patients who visited S- hospital in seoul from January 1982 to June 1983 were compared with the reference levels. Hemoglobin and hematocrit levels of diabetic patients were significantly lower than the reference. The diabetic patients showed 2-3 times higher levels of fasting blood glucose and postprandial -2 hours blood sugar. Levels of blood urine nitrogen and creatine were also significantly higher in the diabetes mellitus and the levels of potassium sodium and chlorine showed no differences although these were decreased gradually in older patients. Lower serum calcium levels were seen in the diabetic patients and this change was more significant at the ages higher than 40. The effect of an active vitamin D on serum-Ca level in diabetic patients was studied in comparison to that of non- diabetic persons. The serum calcium levels were slightly increased in control and insulin- dependent diabetic patients after a week- intake of 1,000mg calcium a day, while the intake of 1,25-dihydroxycholecalciferol ( 1,000 IU per day ) did not increase the serum calcium levels of these groups. Insulin - independent diabetic patients showed the rather lower serum calcium levels after a week- intake of 1,000mg calcium per day. However, the levels were increased after 2-weeks intake of the calcium and a week-in-take of the active vitamin D(1,000 IU/day ). This effect of vitamin D was seen in the groups with lower intake of calcium(500mg/day ) but not in the groups with 1,000mg calcium intake a day.

• Journal of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.1-7
• /
• 1965

Reaction of monochloroacetic acid with zinc in presence of toluene, dimethylformamide, dimethyl sulfoxide, tetrahydrofuran, acetonitrile, and dioxane solvents showed the solvent effect in order of dimethylformamide, dioxane, dimethyl sulfoxide, toluene, acetonitrile, and tetrahydrofuran. The increasing reactivity of the reagents was observed in order of the polarity and hydrophilicity of the solvent. The same reaction of ethyl monochloroacetate in the same series of solvents showed also the solvent effect, but the difference was not large as compared to that of the acid. The reaction of the acid, ester, zinc, and carbonyl precursors such as benzaldehyde and 4-heptanone gave the Reformatsky reaction product in the case of the aldehyde, but the reactivity with 4-heptanone was slight. The yield of the product was varied by the method of addition of reagents. The best yield observed in case of the acid reaction was 38.5% of the hydroxy acid and 0.8g of the salt in presence of acetonitrile and in case of the ester reaction 19.3% of ethyl cinnamate and 21.6% of polymer. The variation of the reactivity of reagents due to the reaction temperature was observed in case of carbonyl reaction. The result was discussed in terms of the solvent effect and the procedures were described.

• Korean Journal of Materials Research
• /
• v.31 no.12
• /
• pp.704-709
• /
• 2021

In the flux used in the batch galvanizing process, the effect of the component ratio of NH₄Cl to ZnCl₂ on the microstructure, coating adhesion, and corrosion resistance of Zn-Mg-Al ternary alloy-coated steel is evaluated. Many defects such as cracks and bare spots are formed inside the Zn-Mg-Al coating layer during treatment with the flux composition generally used for Zn coating. Deterioration of the coating property is due to the formation of AlCl_x mixture generated by the reaction of Al element and chloride in the flux. The coatability of the Zn-Mg-Al alloy coating is improved by increasing the content of ZnCl₂ in the flux to reduce the amount of chlorine reacting with Al while maintaining the flux effect and the coating adhesion is improved as the component ratio of NH₄Cl to ZnCl₂ decreases. Zn-Mg-Al alloy-coated steel products treated with the optimized flux composition of NH₄Cl·3ZnCl₂ show superior corrosion resistance compared to Zn-coated steel products, even with a coating weight of 60 %.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2524-2527
• /
• 2007

Solid propellant gas generators (SPGG) play a role as a turbopump starter in liquid propellant propulsion systems by supplying pressurized gas to power turbines for engine start. For such a purpose, the propellants should burn with a relative low flame temperature and the combustion gas should not contain corrosive constituents such as chlorine compounds. In accordance with these requirements, stabilized AN-based propellants have been usually used as the most appropriate oxidizer for propellant compositions. However, the burning area of the propellant intends to increase to satisfy the required mass flux because of its low burning rate. Consequently the burning area incensement brings on the SPGG size augmentation. A flow restriction such as filters is applied to decrease the SPGG size by rising up the combustion pressure resulting in increasing the burning rate. The feasibility of the size reduction of SPGG by the employment of filters have been studied. The preliminary results of this study show that the considerable reduction of SPGG size would be achievable just by installing a filter with relatively high pressure loss coefficient.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.4
• /
• pp.459-468
• /
• 2015

Deposits discharged through the cleaning mainly were cement mortar, bitumen paintings and rust pieces, and fragments of perforation, stones and gravels. Deposits were more removed through swabbing pig cleaning rather than air scouring cleaning on the whole. However, air scouring cleaning were not influenced by the constraint conditions such as a change in the diameter or the presence of the valve in water mains compare to swabbing pig cleaning. So, it was thought that air scouring cleaning might be more favorable to water distribution network cleaning in the future. After the cleaning, water quality including residual chlorine and turbidity also was improved because of the removal of a significant amount of the deposits. Therefore, if the cleaning is continuously and regularly implemented in water mains, it is expected that it will help to recover the reliability and to preserve the health of water quality.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.322-325
• /
• 2003

BST thin films were etched with inductively coupled plasmas. A chemically assisted physical etch of BST was experimentally confirmed by ICP under various gas mixtures. After a 20 % addition of $BCl_3$ to the $Cl_2/Ar$ mixture, resulting in an increased the chemical effect. As a increases of RF power, substrate power, and substrate temperature, and decrease of working pressure, the ion energy flux and chlorine atoms density increased. The maximum etch rate of the BST thin films was 90.1 nm/min at the RF power, substrate power, working pressure, and substrate temperature were 700 W, 300 W, 1.6 Pa, and 20 $^{\circ}C$, respectively. It was proposed that sputter etching is dominant etching mechanism while the contribution of chemical reaction is relatively low due to low volatility of etching product.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2010.04a
• /
• pp.195-206
• /
• 2010

Xylan can be applied to improve the strength properties of paper; however the optical properties, such as brightness, are decreased significantly. To solve that problem, an applicable bleaching process is therefore desired. The aim of this research was to investigate the impact of hydrogen peroxide bleaching on hardwood kraft pulp pretreated with birchwood xylan by measuring optical properties (whiteness, brightness, opacity) as well as physical properties (tensile index, tearing index, bulk) of handsheets made from the bleached pulp. Hydrogen peroxide bleaching, as a kind of totally chlorine free (TCF) bleaching method, is quite important industrially for chemical pulp. In our work, the process variables of peroxide bleaching including bleaching temperature, time, initial pH and $MgSO_4$ dosage were studied. The results showed that both good mechanical properties and optical properties could be achieved when the operating parameters were controlled properly and therefore hydrogen peroxide bleaching was proved to be a suitable method for bleaching hardwood kraft pulp with adsorption of birchwood xylan.