• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.123-124
• /
• 2009

염화물이 전기아연도금에 미치는 영향을 분석해본 결과 염화물의 양이 부족한 경우에는 도금이 원활하지 않았지만 교반속도를 충분히 주면 도금이 가능하였고, 염화칼륨의 양에 따라서 우선성장하는 면이 달랐으며 가격이 비싼 염화칼륨을 염화나트륨으로 대체 가능성이 확인되었다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.4
• /
• pp.357-369
• /
• 1989

The purpose of this study was to investigate the effects of treatment temperature and time on the, of easy-care and strength properties of the wet fixation processed rayon fabrics. Viscose rayon fabrics were treated with mixed resins of melamine formaldehyde (MF) and DMDHEU by one bath and two bath wet fixation processes. The MF/DMDHEU mixed resin concentrations were 50/100, 50/150, 100/100 and 100/150(g/1). Magnasium chloride was used as a catalyst. The wet fixation conditions were 24hrs at room temperature,20 mins at $75^{\circ}C$ and 5 mins at $105^{\circ}C$ Wet fixation processed fabrics did not show the difference in the resin add-one, DP ratings and wrinkle recovery angles by the different treatment temperatures and times. DP ratings were in the order of $105^{\circ}C>75^{\circ}C>room$ temp, in one bath and two bath wet fixation. Breaking and tearing strength of one bath processed fabrics showed in the order of $75^{\circ}C>room\;temp>105^{\circ}C$ The breaking strength of two bath processed fabrics showed in the order of $105^{\circ}C>75^{\circ}C>room$ temp. Tearing strength showed in the order of $75^{\circ}c>105^{\circ}C>room$ temp. Abrasion resistances were in the order of $75^{\circ}C>105^{\circ}C>room$ temp. in one bath and two bath processes.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.4
• /
• pp.137-143
• /
• 2011

The internal stress and magnetic properties (coercivity and squareness) of Ni-Fe nano thin film synthesized by electrodeposition method were studied as a function of acidic chloride bath conditions (composition and temperature) and current density. Fe deposition patterns were different depending on the temperature of the solution, the stress of film decreased with increasing the solution temperature, and the depending on the amount of Fe deposition showed a parabolic shape. The grain size of film was inversely proportional to stress of thin film. The internal stress of thin film and magnetic properties were deeply relevant, and the stress of thin film had a relationship with bath conditions and grain size of the thin film surface.

• Journal of the Korean institute of surface engineering
• /
• v.10 no.3
• /
• pp.3-11
• /
• 1977

The trivalent choromium plating process have been studied by serveral group of orkers in the recent years. In the plating process, Alecra 3 process is the most familiar one. Potassium formate and potassium chloride of the bath compositions in the above process, are exchanged for sodium formate and sodium chloride, and then they have been examined characteristics of the electrodeposition using above bath solution and a few optimum conditions. The results are as follows, (1) The characteristics of the electrodeposition ; that is, throwing power, covering power, appearance, and deposition rate are most satisfied when concentration of $CrCl_3{\cdot}6H_2O$ is 0.4 mol/l, and mol ratio of HCOONa to Chromium(III); HCOONa/$Cr^{3+}$, is 2 to 3. (2) Throwing power, covering power, color and deposit rate show a similiar tendency to Alecra 3 process.

• The Journal of Korean Medicine
• /
• v.29 no.1
• /
• pp.117-133
• /
• 2008

Objectives : Since ancient times, Koreans have applied medicinal spabaths for treatment of various diseases. The objective of this study was to investigate the effect of strontium, one of the common ingredients of such baths, experimentally on acute skin barrier damage. Materials and Methods : Male hairless mice, average weight 20g, were divided into six groups. Each group consisted of five mice. The first was the normal, non-treated group. The second was the control group with acute skin barrier damage intentionally induced by TS. The third was the Ba-Sr1 group bathed in 1mg/L strontium chloride before and after inducing acute skin barrier damage by TS. The fourth was the Ba-Sr7 group bathed in 7mg/L strontium chloride before and after inducing acute skin barrier damage by TS. The fifth was the Sr1 group bathed in 1mg/L of strontium chloride only after intentionally inducing acute skin barrier damage by TS. The sixth was the Sr7 group bathed in 7mg/L of strontium chloride only after intentionally inducing acute skin barrier damage by TS. External changes of skin, skin erythema level, transepidermal water loss level, and GOT and GPT level of each group were checked immediately before and after TS, 3 hrs, 5 hrs and 24 hrs after inducing acute skin barrier damage. Then, tissue samples were made and examined for damage to epithelial cells, stratum corneum, change of mucous polysaccharide in dermis and amount of mast cells. Statistical analysis was performed by one way-ANOVA, Scheffe and Duncan for a post hoc test and pairwise comparison for comparing for difference between each time. Statistical significance was achieved if the probability was less than 5% (p<0.05) Results : 1. From skin erythema and TEWL level indicating the function of the skin barrier, we can know that it is helpful to the skin barrier to bathe in a water solution including a low concentration of strontium. 2. In the control group with acute skin barrier damage induced by TS, skin barrier damage persisted until 3-5 hrs and recovered after 5-24 hrs. Differently from the control group, in the case of taking a bath in a water solution including strontium, skin barrier damage recovered after only 3-5 hrs. Therefore, the bath with a water solution including strontium can promote recovery of the skin barrier. 3. Bathing in water solution including a higher concentration of strontium was more beneficial to recovery of skin barrier damage. 4. There was no influence on serum GOT and GPT from bathing in a water solution including strontium. Conclusions : The strontium was effective for recovery and mitigation of acute skin barrier damage induced by tape stripping. I suggest that strontium (Sr) can be used as an external treatment medicine, addedinto bath water to treat acute skin barrier damage.

• Membrane and Water Treatment
• /
• v.9 no.5
• /
• pp.317-325
• /
• 2018

Polyvinyl chloride (PVC) ultrafiltration (UF) membrane was modified by silica sol in the coagulation bath during non-solvent induced phase separation (NIPS) process. The effects of silica sol concentrations on the morphology, surface property, mechanical strength and separation property of PVC UF membranes were systematically investigated. PVC membranes were characterized by Fourier transform infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), contact angle goniometry and tensile strength measurement. The results showed that silica had been successfully assembled on the surface of PVC UF membrane. With the increase of silica sol concentration in the coagulation bath, the morphologies of PVC UF membranes changed from cavity structure to finger-like pore structure and asymmetric cross-section structure. The hydrophilicity and permeability of PVC UF membranes were further evaluated. When silica sol concentration was 20 wt.%, the modified PVC membrane exhibited the highest hydrophilicity with a static contact angle of $36.5^{\circ}$ and permeability of $91.8(L{\cdot}m^{-2}{\cdot}h^{-1})$. The structure of self-assemble silica had significant impact on the surface property, morphology, mechanical strength and resultant separation performance of the PVC membranes.

• Journal of the Korean institute of surface engineering
• /
• v.17 no.3
• /
• pp.73-77
• /
• 1984

The surface residual stresses in 1mm thick nickel electrodeposits obtained from four types of nickel sulphamate baths at 40 to 60$^{\circ}C$ and 5 to 25 amps./$dm^2$ were measured by a X-ray method. An increase in nickel chloride concentration in the bath tends to increase tensile residual stresses in the deposits. Addition of no chloride or little chloride in the baths gave rise to little residual stresses or even compressive stresses in the deposits. The residual stresses in most specimens did not exceed 80 MPa and showed minimum in the specimens obtained at 50$^{\circ}C$.

• Journal of the Korean institute of surface engineering
• /
• v.19 no.1
• /
• pp.13-19
• /
• 1986

Manganese in the Anode slime and the paste-positive material of waste-dry cell was recovered by leaching with the hydrochloric acid solution. The impurities (Zn, Fe, Pb), co-leached with manganese were removed from the leached solution prior to electrolysis by hydrometallurgical techniques such as the neutralization with ammonium hydroxide and cementation on manganese powder. The electrodeposition of manganese from the purified chloride solution with sodium selenate was performed. Cathode current efficiency was found to be affected significantly by the concentration of sodium selenate and ammonium chloride salt, bath temperate, current density and PH. The current efficiency of about 88.7% was obtained by electrolysis manganese chloride solution with sodium selenate (0.1/g) at 10$^{\circ}C$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.546-547
• /
• 2007

Magnesium is widely used as a lightweight alloy for car engine components and case of cellular phone. Extraction technologies of magnesium are divided to fused salt electrolysis process and thermal reduction process. In this study, electrolysis magnesium is prepared by fused salt electrolysis process with magnesium chloride. We compared two kinds of mixed salt at 7V. As a result, 47% of current efficiency was obtained by electrolyzing KCl/NaCl/$MgCl_2$ mixed salt bath at $760^{\circ}C$, and purity of the prepared magnesium was over 98%. With this study, we can scale up fused salt electrolysis device and accumulate basic data which will be needed for designing an electrolysis cell.

• Journal of the Korea Convergence Society
• /
• v.8 no.11
• /
• pp.307-312
• /
• 2017

In the industry, galvanizing using the principle of sacrificial anode is used Zn-Ni alloy plating was developed as one of the measures to increase the corrosion resistance rather than pure zinc plating. The alloy plating layer has a corrosion resistance of 4-5 times that of the pure zinc plating layer, so that it is applied to automotive parts requiring high corrosion resistance even though the plating cost is high. The amount of Zn-Ni alloy plating solution is a sulfuric acid bath, a chlorinated bath, an alkali bath, and an ammonia bath. Here, the influence of the electrolytic conditions on the composition of the alloy plating in the chloride bath was investigated. The results are explained by the cathode overvoltage and the diffusion coefficient. In general, as the overvoltage of the cathode increases, the concentration polarization becomes more important than the activation polarization. The concentration polarization is determined by element diffusion in the diffusion layer. That is, as the overvoltage of the cathode increases, the Zn content having a large diffusion coefficient increases.