• 한국염색가공학회지
• /
• 제11권3호
• /
• pp.32-40
• /
• 1999

Chitosan fiber was prepared by wet spinning with various draw ratio. Chitosan fiber was coated with f-carboxymethyl keratein(SCMK) by extruding chitosan solution into 1 M NaOH solution containing 1% SCMK. Among three chitosan used in this study(chitosans of 5 cps, 50 cps, 100 cps), 50 cps chitosan gave the best tenacity and optimum concentration was 5%. SCMK coating increased the tenacity of chitosan fiber. Regardless of SCMK coating, tenacity and elongation of both chitosan fibers were increased with the increase of draw ratio. Chitosan fiber showed antimicrobial activity against Staphyloccus aureus showing 66∼72% of bacteria reduction rates. On the other hand, chitosan fiber coated with SCMK didn't show any antimicrobial activity.

• 한국염색가공학회지
• /
• 제15권3호
• /
• pp.146-153
• /
• 2003

This article describes the metal ions adsorption of chitosan fibers. The chitosan fibers were manufactured by wet spinning using 2% acetic acid as solvent, 10% aqueous sodium hydroxide as non solvent, and 4%chitosan solution as a solvent. The adsorption characteristics of chitosan fibers towards 100ppm solutions of various metal ions such as Cu(II), Cd(II), Cr(III), Hg(II) were examined at different pH value by ICP-Atomic Emission Spectrometer. The adhesiveness of metallic ions to the chitosan fiber were increased with the increase of pH and the decrease of denier. On the other hand, from pH4, chitosan fiber that is immersed in metal ion aqueous solution of Cu(II) and Cd(II) became homogeneous solution because is dissolved. The adhesiveness of metallic ions to chitosan fiber were found to increased in a sequence of Hg(II)> Cr(III)> Cu(II)> Cd(II). The antimicrobial characteristics of the chitosan fiber by adhered metal ions, virgin chitosan fiber, and cotton fiber were evaluated. The antimicrobial activity of the fibers were increased with the decrease of denier.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.37-46
• /
• 2010

This study was carried out to develop new application field and obtain the basic data of mixed paper with wood pulp and chitosan fiber for producing functional paper. Two types of wood pulp, such as SwBKP and HwBKP, were mixed with chitosan fiber. Physical and optical properties, water vapor absorption, air permeability, antibacterial activity and ash were measured. And the surface morphology of manufactured paper was observed using SEM. The results are as follows. It was revealed that density, breaking length, burst index, tear index, folding endurance and brightness were reduced but water vapor absorption and air permeability were on the rise in the structural view of SwBKP according to increasing the chitosan fiber ratio. Those HwBKP added chitosan fiber were great not only in the strength but also water vapor absorption and air permeability except for brightness. The water vapor absorption was lower and the air permeability was higher in the HwBKP added various chitosan fiber ratios than those with no chitosan fiber. It is estimated that these properties were related with various mixed rate of chitosan fiber. Particularly, air permeability was strongly dependent on the mixed rate of chitosan fiber. The chitosan fiber has superior antibacterial property, comparing with wood fiber. Adding chitosan fiber to the wood pulp was found to have an excellent antibacterial activity, more than 90%. The ashes were determined within 0.5%. Special bonds between chitosan fiber and wood pulp was observed by SEM and it means that the chitosan fiber were combined equally in the interior of wood pulp. In conclusion, mixing wood pulp with chitosan fiber can not only improves the quality of paper but also extend the usage of paper as a functional paper by using inherent property of chitosan. After all, production of functional paper added chitosan fiber is expected for new valuable industry of paper.

• Journal of Nutrition and Health
• /
• 제30권7호
• /
• pp.751-769
• /
• 1997

This study was performed to investigate the effect of chitosan and NOCC from different sources and of different molecular weights on cadmium toxicity. Sprague-Dawley rats were blocked into 26 groups according to body weight, and were raised for 4 weeks. Cadmium chloride was given at the level of 0 or 400 ppm in diet. Various forms of chitosan and NOCC were given at the level of 0 or 4%(w/w) of diet. Cd toxicity was alleviated by various chitosan and NOCC supplements. However, the alleviating effects were different with fiber source(crab and shrimp), type(chitosan and NOCC), and molecular weight (low, medium, and high). Molecular weight had no significant effect. Compared with shrimp-source-fiber-fed groups, crab-source-fiber-fed groups showed lower Cd concentrations in blood and kidney, lower kidney metallothionein concentration, and lower liver and kidney MT-Cd contents. Compared with NOCC -fed groups, chitosan-fed groups showed lower intestine and liver Cd concentrations, lower liver and kidney MT concentrations and MT-Cd content, and higher fecal Cd excretion. Among cadmium-exposed group, low molecular weight shrimp chitosan group showed low Cd concentrations of liver and kidney, high fecal Cd excretions, and the lowest intestine and liver MT concentrations and liver MT-Cd content. In summary, a crab source fiber was more effective than shrimp source fiber, chitosan was more effective than NOCC, and the most effective one in alleviating Cd toxicity was low molecular weight shrimp chitosan.

• 한국의류산업학회지
• /
• 제16권2호
• /
• pp.319-325
• /
• 2014

This article describes a method for producing chitosan non-woven fabrics by just hot pressing without the use of a binder. A study has been made of the wet spinning of chitosan fiber. The fibers were rinsed thoroughly in running water and chopped wet into staples of with a length of approximately 5-10 mm. The chopped chitosan staples were dispersed uniformly in water and fabricated using a non-woven making machine. This study examined the formation and the characteristics of chitosan non-woven fabrics manufactured by hot pressing without the use of a binder. The effects of the non-woven fabrication conditions on the thermal, morphological, structural, and physical properties of chitosan non-woven fabric with and without water as a plasticizer were studied. The temperature of the exothermic peak, decomposition of chitosan fibers increased with increasing heating rate. Water in the chitosan fiber effectively plasticized the chitosan fiber. The thermal bonded structure of the wet chitosan fiber with water as a plasticizer was clearly found in many parts of the non-woven fabric at a fabrication temperature of $200^{\circ}C$. The intensity and profile of the (100) plane($2{\theta}=10.2^{\circ}$) and (040) plane($2{\theta}=20.9^{\circ}$) in the chitosan non-woven fabric decreases and became smooth in the non-woven fabric formation by melting.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.25-29
• /
• 2014

This research was aimed to fabricate an optical fiber-based SERS substrate which can detect dopamine neurotransmitters. Chitosan nanoparticles (NPs) were firstly anchored on the surface of optical fiber, and then gold layer was subsequently deposited on the anchored chitosan NPs via electroless plating method. Finally, chitosan-gold nanocomposites combined with optical fiber reacted with dopamine molecules of 100-1500 mg/day which is a standard daily dose for Parkinson's disease patients. The amplified Raman signal at $1348cm^{-1}$ obtained from optical fiber-based SERS substrate was plotted versus dopamine concentrations (1-10 mM), demonstrating an approximate linearity of Y = 303.03X + 2385.8 ($R^2$ = 0.97) with narrow margin errors. The optical fiber-based Raman system can be potentially applicable to in-vitro (or in-vivo) detection of probe molecules.

• 한국염색가공학회지
• /
• 제33권3호
• /
• pp.131-140
• /
• 2021

Collagen and chitosan are used in medical and cosmetic materials as natural polymers. In order to utilize the advantages of the materials, collagen/chitosan conjugated wet-spun fibers were prepared. The analysis of surface, optical, thermal and mechanical properties was carried out on the various composition of collagen and chitosan. As a result of images analysis, it was verified that the collagen/chitosan conjugated fibers were stably spun. In addition, the optical and thermal properties of fibers were observed to be changed by hydrogen bond. As a result, an optimized composition could be found at an appropriate content. Moreover, the optimized fibers have mechanical properties similar to chitosan fibers, while improving the structural and thermal stability by its hydrogen bond. In addition, the wet-spun collagen/chitosan conjugated fibers can be applied to medical and various fields through mechanical properties according to content control.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.273-274
• /
• 2003

Chitin and chitosan have a wide range of application on the environmental and biomedical engineering by their biocompatibility, biodegradability, non-toxicity and adsorption property, etc. The efforts of manufacturing chitosan fibers are continuously maintained until now$\^$l.2)/. Electrospinning is new method to produce the nano-sized fibers for medical uses. Recently, formation of chitosan fiber using electrospinning is studied by many textile researchers. (omitted)

• 한국염색가공학회지
• /
• 제14권3호
• /
• pp.26-33
• /
• 2002

Dyeing properties and crosslinking effect of bifunctional reactive dyes on chitosan fiber were investigated to improve the stability of chitosan fiber against the mild acidic solution and the wet processing. Chitosan fibers were crosslinked with epichlorohydrin for comparing purpose, and dyed with C. I. Reactive Red 194, C. I. Reactive Blue 50, and the reactive dye having two $\alpha$-bromoacrylamide groups at various concentrations. The initial dyeing rates of reactive dyes are rapid and chitosan fibers absorb the relatively large amount of dyes. The chitosan fibers dyed with these dyes show the low degree of swelling and the low solubility in 1 % acetic acid solution and also represent the higher thermal stability The reactive dye with two $\alpha$-bromoacrylamide groups shows higher crosslinking effect than other dyes.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.466-473
• /
• 2004

We have used FT-IR spectra to explain the effects of hydrogen bonding between chitosan and polycaprolactam (PA6). A dynamic mechanical analysis study suggested that the optimum chitosan and PA6 miscibility under the conditions of this experiment were obtained at a blending ratio of 40:60. We studied the thermal degradation of chitosan blended with PA6 (chitosan/PA6) by thermogravimetric analysis and kinetic analysis (by the Ozawa method). Dry chitosan and PA6 exhibited a single stage of thermal degradation and chitosan/PA6 blends having> 20 wt% PA6 exhibited at least two stages of degradation. In chitosan/PA6 blends, chitosan underwent the first stage of thermal degradation; the second stage proceeded at a temperature lower than that of PA6, because the decomposition product of chitosan accelerated the degradation of PA6. The activation energies of the blends were between 130 and 165 kJ/mol, which are also lower than that of PA6.