• 유공압시스템학회논문집
• /
• 제4권4호
• /
• pp.21-27
• /
• 2007

A hydraulic breaker for construction machinery generally used for the destroying and disassembling of buildings, crashing road pavement, breaking rocks at quarry and so on. So the measurement of the impact energy of a hydraulic breaker is very important thing to prove its capability to manufacturers and customers. Therefore the prediction of impact energy in design process is very helpful to the most of breaker manufacturers. In this study, we carried on modeling and simulation of a hydraulic breaker to predict impact energy via commercial CAE software. The modeling and simulation of a hydraulic breaker was achieved with two parts. One is a hydraulic circuit analysis part via AMESim and the other is impact strain analysis part via ANSYS.

• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.98-107
• /
• 1996

In order to predict analytically torque, thrust force, tool life and chip formation in drilling, cutting models for chisel edge with various tool-chip contact length were developed in this type. Also, the experimental tests are run with various pilot holes. The following conclusions were obtained from the analysis. \circled1 It's also found experimentally that thrust force(Fz) decreases as pilot hole diameter increases. \circled2 Surface roughness for material(G) is larger that for material(J). The difference over two materials in roughness value about 0.5$mu extrm{m}$. \circled3 Flank wear of the drill in cutting material of G less than any other kinds of materials(F, G, H, I, J). \circled4 In drilling a deep hole on a workpiece over SM45C either twist drill. The chip was conical helix type at the fist suspensely change the two segment type and than two a long pitch helix style.

• 한국공작기계학회논문집
• /
• 제17권5호
• /
• pp.89-94
• /
• 2008

Marine propeller is one of the most important element of ship, it must be taken care of design and maintenance of it. It is inevitable that corrosion pits have occurred on the marine propeller. If corrosion pits have occurred on the blades, they have been repaired ordinary by simple welding methods in shipyards. It must be that the strength is degraded in this process. In this paper, we represent the improvement method of fatigue strength degraded after repairing pits.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.579-579
• /
• 2003

I. Objectives The aim of this study was to evaluate and compare the effectiveness of sealer placement in simulated root canal extensions using the K file, ultrasonic file, lentulo spiral and EZ-Fill. II. Materials and Methods Forty resin blocks were attained from cutting Endo-training Bloc with diamond saw. In each parallelepiped block, the simulated root canal was made with ＃20, 08taper GT file. After each block was longitudinally split into two halves using mallet and chisel, a standardized groove of 4mm in length, located 2mmapart from the root apex, was prepared on one wall of two halves using the custom-made knife to simulate the canal extensions with various irregularities.(omitted)

• 한국기계가공학회지
• /
• 제18권5호
• /
• pp.82-89
• /
• 2019

This study is a structural analysis of the major components of the implements for an agricultural tractor. To develop an unpowered high-speed implement of an agricultural tractor, the modeling and analysis of the benchmarking product was calculated using 3D scanning and reverse design technologies. The tractive load was calculated using the powertrain efficiencies and soil-propelling force, which were estimated by analyzing the main frame, disc, frames, and chisel plow for the axial loading condition. The final goal of this research is to establish the design parameters and assembly technology for securing disc harrow structures and durability of life. This information will be used to analyze the new model design for domestic consumption.

• 박물관보존과학
• /
• 제20권
• /
• pp.13-30
• /
• 2018

고대 금속 상감기법은 선상감이 주류를 이루며, 철을 바탕금속으로 하여 'V'자형 또는 'U'자형 등의 홈을 판 후, 금, 은 등의 상감 재료를 감입하여 제작된다. 고대의 금속 선상감에 대한 기존 연구는 보존처리 과정 중에서 조사된 유물의 현미경 사진 등을 기반으로 하여 제작기법을 유추해 왔지만, 선상감기법의 미시적 조사에는 한계가 있다. 따라서 선상감기법의 조사는 기존의 방식과 더불어, 실체현미경을 활용하여 투과광하에서 X-선 필름을 확대 사진촬영하는 방식이 훨씬 유효한 방법이었다. 그리고 선상감의 제작 공정 중 가장 핵심적인 기술은 '정을 이용하여 홈을 파는 공정'과 '상감선을 만드는 공정'으로 연구자 간의 쟁점도 이러한 2가지 공정에서 차이를 보인다. 따라서 실체현미경을 활용한 X-선 필름 판독 등을 통해 핵심 공정에 대한 백제 선상감 자료를 전수조사한 결과, 백제 선상감 자료는 크게 소성가공의 축조기법을 기반으로 하는 천안·공주지역의 계통과 절삭가공의 모조기법을 기반으로 하는 오산·서산·완주지역의 계통으로 양분되는 것으로 조사되었다. 그리고 이러한 상감 기술의 계통적 구분은 제작 집단 또는 이입 루트의 이원화에 의해 기인된 결과로 해석하였다.

• 암석학회지
• /
• 제22권1호
• /
• pp.9-17
• /
• 2013

울릉도 서면의 비파산에는 마치 국수가락과 같은 독특한 외관을 가진 조면암질 단애가 위치하고 있다. 이 단애는 외관상의 특징에 의해 국수바위라 명명되었으며 북쪽을 제외한 삼면에 단애가 발달하고 있고 각 면에서 아수직 방향의 주상절리를 뚜렷하게 보여주고 있다. 이 주상절리는 노출된 방향에 따라 형태 및 광물학적으로 상이한 특징을 보이고 있으며 이 경향은 동쪽 면과 서쪽면의 대조에서 두드러진다. 본문에서는 양 측면에 노출된 주상절리의 대조를 바탕으로 용암의 분출 이 후의 냉각과정에 대해 고찰하였다. 형태학적인 측면에서 동쪽 면은 서쪽 면에 비해 주상절리와 끌 구조의 간격이 좁고 절리면이 비교적 뚜렷하게 발달하고 있다. 그리고 광물학적인 측면에서 서쪽 면의 조면암은 동쪽 면에 비해 반정이 크고 취반상조직을 보이며 라쓰상의 사장석에 의한 트라카이틱조직이 미약하다. 이러한 차이점을 중심으로 하여 고온의 암체가 냉각될 때 보이는 전형적인 온도구배를 모델링하였으며, 그 결과 동쪽 면은 서쪽 면에 비해 암체의 바깥쪽에 해당하였을 것이라는 추론에 부합하였다. 국수바위의 주상절리는 경관적인 가치와 함께 조면암질 용암에서 발달하는 주상절리의 형성과정에 대한 학술적인 중요성으로 자연유산적인 보전가치가 높은 것으로 판단된다.

• 한국임상수의학회지
• /
• 제34권6호
• /
• pp.459-462
• /
• 2017

A 3-year-old, 5.6 kg, castrated, male, British short hair cat presented with subtle weight-bearing lameness of the right hindlimb when walking suddenly after rest. On physical examination, the patient experienced pain when the right stifle joint was hyperextended. There was no clinical improvement of lameness or pain of the right hindlimb, despite the administration of analgesic drugs for one week. During diagnostic arthroscopy of right stifle, mild synovitis and cranial cruciate ligament (CCL) impingement on osteophyte of the intercondylar notch (ICN) was observed. Computed tomography was applied to determine an accurate surgical plan. Arthroscopy-assisted notchplasty, including removal of the osteophyte, was performed using chisel and arthroscopic burr. At 4 weeks postoperatively, the frequency of subtle weight-bearing lameness of the right hindlimb was significantly reduced. At 6 months postoperatively, the patient exhibited normal ambulation without recurrence of lameness. Impingement of CCL may cause subtle lameness and pain. Arthroscopy can be a good diagnostic tool for early-stage CCL disease. Notchplasty can be recommended for osteophyte-induced CCL disease.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.65-72
• /
• 2005

Drilling process is one of the most common, yet complex operations among manufacturing processes. The performance of a drill is largely dependent upon drilling forces, Many researches focused on the effects of drill parameters on drilling forces. In this paper, an effective theoretical model to predict thrust and torque in drilling is presented. Also, with the predicted forces, the stress analysis of the drill tool is performed by the finite element method. The model uses the oblique cutting model for the cutting lips and the orthogonal cutting model for the chisel edge. Thrust and torque are calculated analytically without resorting to any drilling experiment, only by tool geometry, cutting conditions and material properties. The stress analysis is performed by the commercial FEM program ANSYS. The geometric modeling and the mesh generation of a twist drill are performed automatically. From the study, the effects of the variation of the geometric features of the drill and of the cutting conditions of the drilling on the drilling forces and the stress distributions in the tool are calculated analytically, which can be applicable for designing optimal drill geometry and for improving the drilling process.

• 건축역사연구
• /
• 제15권2호
• /
• pp.55-76
• /
• 2006

History of architecture technology is the area where further studies are the most needed in Korean architecture history. This present study deals with architectural tools and woodworking of Baekje as a first step in exploration of Korean architecture technology history especially, that of Baekje dynasty. Based on the study of real artifacts and archeological sites showing the trace of tool use, function and forms of architectural tools were classified, characteristics of tools investigated, and woodworking technology analyzed. The main tools of analysis include Square, Black Inkpot, Hatchet, Saw, Chisel, Wood Hammer, Axe, and Plane. It is assumed that architectural technology during Baekje dynasty might have leapt into the new stage thanks to the regular use of iron tools. Compared to those of previous eras, iron tools of Baekje are more elaboratedly-designed and well-defined in function. In addition, wooden architectural tools from Baekje demonstrate the superiority of its woodworking technology Historical record also shows the fact that craftsman from Baekje participated in construction of temples of Shilla and Japan. Precise assessment of Baeje architecture technology is difficult because no Baekje wooden architecture is still remaining. The facts mentioned above, however, surely prove the excellence of architecture technology of Baekje.