• Steel and Composite Structures
• /
• 제43권2호
• /
• pp.139-152
• /
• 2022

Steel-reinforced concrete (SRC) L-shaped column is the vertical load-bearing member with high spatial adaptability. The seismic behavior of SRC L-shaped column is complex because of their irregular cross sections. In this study, the hysteretic performance of six steel truss reinforced concrete L-shaped columns specimens under the combined loading of compression, bending, shear, and torsion was tested. There were two parameters, i.e., the moment ratio of torsion to bending (γ) and the aspect ratio (column length-to-depth ratio (φ)). The failure process, torsion-displacement hysteresis curves, and bending-displacement hysteresis curves of specimens were obtained, and the failure patterns, hysteresis curves, rigidity degradation, ductility, and energy dissipation were analyzed. The experimental research indicates that the failure mode of the specimen changes from bending failure to bending-shear failure and finally bending-torsion failure with the increase of γ. The torsion-displacement hysteresis curves were pinched in the middle, formed a slip platform, and the phenomenon of "load drop" occurred after the peak load. The bending-displacement hysteresis curves were plump, which shows that the bending capacity of the specimen is better than torsion capacity. The results show that the steel truss reinforced concrete L-shaped columns have good collapse resistance, and the ultimate interstory drift ratio more than that of the Chinese Code of Seismic Design of Building (GB50011-2014), which is sufficient. The average value of displacement ductility coefficient is larger than rotation angle ductility coefficient, indicating that the specimen has a better bending deformation resistance. The specimen that has a more regular section with a small φ has better potential to bear bending moment and torsion evenly and consume more energy under a combined action.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.245-245
• /
• 2023

This paper examines the extent to which the Mekong River Basin countries have achieved socioeconomic benefits based on regional cooperation through the Greater Mekong Subregion (GMS) Program, focusing on hydropower development and the Mekong Power Grid. This study pays attention to the time period from 2012 to 2022. The benefit sharing approach is employed to evaluate the extent to which hydropower development and the Mekong Power Grid have contributed to the regional energy trade in the GMS program. The GMS program was launched by the Asian Development Bank (ADB) in 1992, and the Chinese provinces of Yunnan and Guangxi, Myanmar, Lao PDR, Thailand, Cambodia, and Vietnam have taken an active part in the program. The goals of the GMS program are to achieve poverty alleviation, economic development, and regional cooperation in various sectors, including energy, tourism, and transportation. The GMS Economic Cooperation Program Strategic Framework 2030 (GMS-2030), in 2021, provides a new framework for prosperous and sustainable development in the river basin. In the energy sector, the GMS program has been instrumental in facilitating hydropower development and creating the Mekong Power Grid with the Regional Grid Code (RGC), contributing to economic benefits and promoting regional trade of hydroelectricity. It is argued that the GMS program has enhanced regional cooperation between the riparian countries. Despite such achievements, the GMS program has faced challenges, including the gap of economic development between the riparian countries, socioeconomic and environmental concerns regarding hydropower development between the Upper and Lower Mekong countries, and geopolitical tensions from the US-China rivalry. These challenges should adequately be addressed within the program, which can guarantee the sustainability of the program for the river basin.

• Steel and Composite Structures
• /
• 제44권5호
• /
• pp.741-752
• /
• 2022

Earlier works have shown that excessive shear stiffness at the steel-concrete interface causes a non-uniform distribution of shear force in composite structures. When the shear studs are wrapped at the fixed end with flexible materials with a low elastic modulus, the shear stiffness at the interface is reduced. The objective of this study was to investigate the effect of silicone rubber-sleeve mounted on shear studs on the shear stiffness of steel-concrete composite structures. Eighteen push-out tests were conducted to investigate the mechanical behavior of silicone rubber-sleeved shear stud groups (SRS-SSG). The dimension and arrangement of silicon rubber-sleeves (SRS) were taken into consideration. Test results showed that the shear strength of SRS-SSG was higher than that of a shear stud group (SSG), without SRS. For SRS-SSG with SRS heights of 50 mm, 100 mm, 150 mm, the shear strengths were improved by 13%, 20% and 9%, respectively, compared to the SSG alone. The shear strengths of SRS-SSG with the SRS thickness of 2 mm and 4 mm were almost the same. The shear stiffness of the SRS-SSG specimens with SRS heights of 50 mm, 100 mm and 150 mm were 77%, 67% and 66% of the SSG specimens, respectively. Test results of specimens SSG-1 and predicted values based on the three design specifications were compared. The nominal single stud shear strength of SSG-1 specimens was closest to that calculated by the Chinese Code for Design of Steel Structures (GB50017-2017). An equation is proposed to consider the effects of SRS for GB50017-2017, and the predicted values based on the proposed equation agree well with the tested results of SRS-SSG.

• Earthquakes and Structures
• /
• 제26권5호
• /
• pp.383-400
• /
• 2024

For a conventionally repaired frame-supported-transfer-slab (FSTS) reinforced concrete (RC) structure, both the transfer slab and the beam-to-column and transfer slab-to-column joints remain vulnerable to secondary earthquakes. Aimed at improving the seismic performance of a damaged FSTS RC structure, an innovative retrofitting scheme is proposed, which adopts the sector lead rubber dampers (SLRDs) at joints after the damaged FSTS RC structure is repaired by conventional approaches. In this paper, a series of quasi-static cyclic tests was conducted on a large-scale retrofitted FSTS RC structure. The seismic performance was evaluated and the key test results, including deformation characteristics, damage pattern, hysteretic behaviour, bearing capacity and strains on key components, were reported in detail. The test results indicated that the SLRDs started to dissipate energy under the service level earthquake, and thus prevented damages on the beam-to-column and transfer slab-to-column joints during the secondary earthquakes and shifted the plastic hinges away from the beam ends. The retrofitting scheme of using SLRDs also achieved the seismic design concept of 'strong joint, weak component'. The FSTS RC structure retrofitted by the SLRDs could recover more than 85% bearing capacity of its undamaged counterpart. The hysteresis curves were featured by the inverse "S" shape, indicating good bearing capacity and hysteresis performance. The deformation capacity of the damaged FSTS RC structure retrofitted by the SLRDs met the corresponding codified requirements for the case of the maximum considered earthquake, as set out in the Chinese seismic design code. The stability of the FSTS RC structure retrofitted by the SLRDs, which was revealed by the developed stains of the RC frame and transfer slab, was improved compared with the undamaged FSTS RC structure.

• 동양고전연구
• /
• 제37호
• /
• pp.63-91
• /
• 2009

본 논문은 귀화인(歸化人)(향화인(向化人)) 가운데 조선초기 실록기사에서 사향(賜鄕)[왕으로부터 관향(貫鄕)을 하사받음]이 확인되는 인물들의 사향 과정과 활동에 대해 살핀 글이다. 조선초기 실록을 통해 검토 가능한 사향(賜鄕) 사례는 한인이 4명[오진(吳眞), 이민도(李敏道), 당성(唐誠), 매우(梅佑)]으로 다수이지만, 서역에서 온 회골인(回?人)[위그르인, 설장수(?長壽)]과 외오아국(畏吾兒國) 출신[이현(李玄)]도 있으며, 향화(向化) 왜인(倭人)도 2명[평순(平順), 피상의(皮尙宜)]이나 된다. 이들이 우리나라에 귀화한 시기는 고려 충렬왕 때부터 조선 정종 원년까지 걸쳐있으며, 귀화한 인물은 관향을 하사받은 인물의 증조, 조, 부, 본인 등 다양하다. 이들의 사향 시기는 태조 태종 세종 세조조이며, 하사받은 관향은 계림(鷄林) 임주(林州) 해주(海州) 상주(尙州) 밀양(密陽) 충주(忠州) 창원(昌原) 동래(東萊) 태안(泰安) 등으로 전국에 걸쳐 있다. 사향지(賜鄕地)는 처향(妻鄕)일 가능성이 높다. 관향(貫鄕)을 하사받은 인물은 역관(譯官)이 다수로 대명외교(對明外交)와 대일외교(對日外交)에 많은 공적을 보이고 있으며, 그 외에 의술(醫術)과 점술(占術), 율문(律文) 분야에서 활동한 인물도 있다. 과거급제를 한 설장수는 지공거(知貢擧)도 담당했으며, 이민도와 당성은 조선 개국에 기여하여 개국공신과 개국원종공신에 참여하기도 했다. 이와 같은 활동실적이 있었기에 왕으로부터 관향을 하사받는 사향(賜鄕)의 영광을 누릴 수 있었을 것이다. 그러나 사향의 영광을 입은 관향이지만, 현재 임주 이씨, 창원 평씨, 동래 피씨 등은 그 후손을 확인할 수가 없다. 귀화(歸化) 한인(漢人)의 후손은 모두 현존하지만, 향화(向化) 왜인(倭人)의 후손은 단절되어 있다. 이는 조선시대의 대외인식과도 밀접한 연관이 있을 것으로 여겨진다.

• Toxicological Research
• /
• 제32권3호
• /
• pp.195-205
• /
• 2016

This study was performed to select single nucleotide polymorphisms (SNPs) related to the body burden of heavy metals in Koreans, to provide Korean allele frequencies of selected SNPs, and to assess the difference in allele frequencies with other ethnicities. The candidate-gene approach method and genome-wide association screening were used to select SNPs related to the body burden of heavy metals. Genotyping analysis of the final 192 SNPs selected was performed on 1,483 subjects using the VeraCode Goldengate assay. Allele frequencies differences and genetic differentiations between the Korean population and Chinese (CHB), Japanese (JPT), Caucasian (CEU), and African (YIR) populations were tested by Fisher's exact test and fixation index ($F_{ST}$), respectively. The Korean population was genetically similar to the CHB and JPT populations ($F_{ST}$ < 0.05, for all SNPs in both populations). However, a significant difference in the allele frequencies between the Korean and CEU and YIR populations were observed in 99 SNPs (60.7%) and 120 SNPs (73.6%), respectively. Ten (6.1%) and 26 (16.0%) SNPs had genetic differentiation ($F_{ST}$ > 0.05) among the Korean-CEU and Korean-YIR comparisons, respectively. The SNP with the largest $F_{ST}$ value between the Korean and African populations was cystathionine-${\beta}$-synthase rs234709 ($F_{ST}$: KOR-YIR, 0.309; KOR-CEU, 0.064). Our study suggests that interethnic differences exist in SNPs associated with heavy metals of Koreans, and it should be considered in future studies that address ethnic differences in heavy-metal concentrations in the body and genetic susceptibility to the body burden of heavy metals.

• 기술혁신학회지
• /
• 제16권1호
• /
• pp.63-100
• /
• 2013

과학데이터는 사실, 관찰, 이미지, 컴퓨터프로그램결과, 기록, 측량 또는 경험(논거, 이론, 테스트 또는 가설 또는 기타 연구물에 기초한)의 형태에서 생성되는 데이터를 의미한다. 연구패러다임이 데이터 중심의 연계 융합연구로 전환되면서 이러한 과학데이터에 대한 중요성과 그 가치는 매우 높아지고 있다. 과학데이터가 창의적인 연구개발을 위해 효율적으로 재사용될 수 있기 위해서는 공유와 활용을 위한 관리체계의 구축이 필수적이다. 과학데이터의 공유와 활용을 위한 관리체제의 구축은 국가적 차원에서 이루어져야 하지만, 우리나라의 경우 관리체제의 수준은 호주, 미국, 중국 또는 유럽에 비해서 연계성으로나 효율성으로나 내실을 기하지 못하고 있다. 호주, 미국, 중국 등은 국가차원에서 관련 기관을 통해 과학데이터를 수집, 관리 및 유지하는 등 데이터 활용을 적극적으로 추진하기 위하여 중장기적인 정책수립, 법제도 정비, 기반시설에 대한 투자를 지속적으로 확대하고 있다. 본 연구는 효율적이고 공정한 과학데이터의 공유 및 활용을 위한 국가적인 관리체계구축 및 이를 뒷받침할 수 있는 법제도를 정비함에 있어서 해외 관련 입법례 및 정책동향에 관하여 살펴보고, 향후 우리나라의 대응방안을 제시하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권7호
• /
• pp.943-954
• /
• 2009

Diacylglycerol acyltransferase (DGAT) is a key enzyme that catalyzes the final and rate-limiting step of triglyceride synthesis. Both DGAT1 and DGAT2 genes code proteins with DGAT activity. Studies have shown DGAT1 polymorphisms associate with intramuscular fat deposition in beef cattle, but fewer associations between DGAT2 and beef cattle economic traits have been reported. The objective of this study was to investigate single nucleotide polymorphism (SNP) in intron3 of bovine DGAT2 and evaluate the associations of that with carcass, meat quality, and fat yield traits. Test animals were 157 commercial feedlot steers belonging to 3 Chinese native breeds (22 for Luxi, 24 for Jinnan, and 23 for Qinchuan), 3 cross populations (20 for Charolais${\times}$Fuzhou, 18 for Limousin ${\times}$Luxi, and 17 for Simmental${\times}$Jinan) and 1 Taurus pure breed population (16 Angus steers). In the current study, 15 SNP were discovered in intron3 and exon4 of DGAT2 at positions 65, 128, 178, 210, 241, 255, 270, 312, 328, 334, 365, 366, 371, 415, and 437 (named as their positions in PCR amplified fragments). Only 7 of them (128, 178, 241, 270, 312, 328, and 371) were analyzed, because SNP in three groups (65-128-255, 178-210-365 and 241-334-366) were in complete linkage disequilibrium within the group, and SNP 415 was a deletion and 437 was a null mutation. Frequencies for rare alleles in the 3 native breed populations were higher than in the 3 cross populations for 178 (p = 0.04), 270 (p = 0.001), 312 (p = 0.03) and 371 (p = 0.002). A general linear model was used to evaluate the associations between either SNP genotypes or allele substitutions and the measured traits. Results showed that SNP 270 had a significant association with the fat yield associated with kidney, pelvic cavity, heart, intestine, and stomach (KPHISY). Animals with genotype CC and CT for 270 had less (CC: -7.71${\pm}$3.3 kg and CT: -5.34${\pm}$2.5 kg) KPHISY than animals with genotype TT (p = 0.02). Allele C for 270 was associated with an increase of -4.26${\pm}$1.52 kg KPHISY (p = 0.006) and $-0.92{\pm}0.45%$ of retail cuts weight percentage (NMP, Retail cuts weight/slaughter body weight) (p = 0.045); allele G for 312 was associated with an increase of -5.45${\pm}$2.41 kg KPHISY (p = 0.026). An initial conclusion was that associations do exist between DGAT2 gene and carcass fat traits. Because of the small sample size of this study, it is proposed that further effort is required to validate these findings in larger populations.

• 한국식품저장유통학회지
• /
• 제21권4호
• /
• pp.529-535
• /
• 2014

본 연구는 전통적으로 방부 또는 살균효과가 있어 떡 등에 첨가되거나 저장 및 포장에 이용되었던 자생식물 15종 21건에 대하여 데하이드로초산(sodium dehydroacetate), 소르빈산(sorbic acid), 안식향산(benzoic acid), 파라옥시안 식향산메틸(methyl p-hydroxybenzoate), 파라옥시안식향산에틸(ethyl p-hydroxybenzoate), 파라옥시안식향산프로필(propyl p-hydroxybenzoate), 파라옥시안식향산이소프로필(isopropyl p-hydroxybenzoate), 파라옥시안식향산이소부틸(isobutyl p-hydroxybenzoate), 파라옥시안식향산부틸(butyl p-hydroxybenzoate), 프로피온산(propionic acid)의 함유량을 분석하였다. 솔잎, 망개잎, 대나무잎 등 15종에 대한 천연유래 보존료 함유량을 조사한 결과 솔잎, 대나무잎, 칡잎, 모시잎, 쑥, 잣나무잎 등 6종에서 안식향산, 소르빈산, 프로피온산을 확인할 수 있었다. 안식향산은 대나무잎, 모시잎, 솔잎, 쑥, 칡잎, 잣나무잎에서 8.201~21.839 mg/kg, 소르빈산은 대나무잎과 칡잎에서 5.630~24.995 mg/kg, 프로피온산은 모시잎에서 61.324~62.726 mg/kg이 검출되었다. 조사 식물 중 망개잎, 토란잎, 조릿대, 연잎, 원추리, 구절초, 떡갈나무잎, 산초잎, 감잎 등 9종에서는 천연보존성분이 검출되지 않았다.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제7권4호
• /
• pp.193-202
• /
• 2017

중국 제조업의 성장과 선진국들의 제조업 정책 강화로 인해 국내 제조업이 경쟁력 약화 되고 있으며 이에 따라 새로운 성장을 위한 동력에 대한 필요성이 강하게 대두되는 시기이다. 이 연구는 제조업의 사운드 디자인을 지원하기위한 인지 및 감성 정보 시스템 구축을 위한 기반 연구로 AUI(Auditory User Interface) 가이드라인을 도출하는 것을 목적으로 한다. 연구의 수행을 위해서 제조업 종사자 대상의 인터뷰를 수행하여 AUI 설계와 관련된 맥락과 관련된 주요 특성들을 분석하였다. 또한 제조업 AUI 설계에서 가장 핵심적으로 활용되는 사운드 요소를 제품의 대표 기능에 대한 사용자 선호도를 총 269명을 대상으로 조사를 실시하였다. 이 조사 데이터를 분석하여 각 소리에 가장 적합한 멜로디 방식과 이에 대한 남성과 여성 사용자의 선호도 차이를 분석하였다. Beep음을 기반으로 음의 개수, 멜로디 유형, 코드를 중심으로 분석을 수행하였으며, 제품의 주 사용자 대상을 남성과 여성을 나눌 때 활용 가능한 AUI 가이드라인 결과를 함께 도출하였다. 이 연구는 제조업 AUI 설계를 지원할 수 있는 시스템의 기본 가이드 데이터를 구축한 것에 가장 큰 의의를 가진다.