• 제목/요약/키워드: Chemical-structural properties

검색결과 965건 처리시간 0.027초

진주성 촉석루 성곽지반의 풍화특성과 사면안정성 평가 (Weathering Properties and Slope Stability Evaluations of Bedrock under the Chokseongnu Pavilion, Jinjuseong Fortress, Korea)

  • 조영훈;이명성;이선명;이찬희
    • 보존과학회지
    • /
    • 제20권
    • /
    • pp.89-103
    • /
    • 2007
  • 진주성 촉석루의 성곽지반은 진주층의 사암을 기반암으로 암갈색 내지 담회색의 미사암과 암회색 세일이 호층을 이루며 촉석문 쪽으로 경사진 층리가 발달되어 있다. 이 지반에는 크고 작은수직 및 수평절리가 발달되어 있으며 풍화와 침식작용에 의해 여굴이 발생되어 있다. 또한 불연속면의 발달에 의한 누수현상과 세일층의 세편화, 수목 근압에 의한 균열 및 절리가 나타나 있다. 이 성곽지반의 구성암석 중 물리적으로는 세일층이 화학적으로는 미사암층이 풍화에 민감하게 나타났으며, 공통적으로 기반암인 사암이 풍화에 가장 민감한 특징을 보였다. 성곽지반의 사면안정성 평가 결과, 이 암반사면은 평면파괴에 안정하나 국부적으로 소규모의 쐐기파괴 가능성을 갖고 있으며 사면 전체적으로 전도파괴에 불안정성을 보이는 것으로 나타났다. 따라서 이 성곽지반은 연약지반 개량공법을 통한 지반강도를 증대시키고 석조문화재용 강화제 등을 이용한 표면강화처리를 실시해야 할 것이다. 또한 최소한의 경관을 유지 할 수 있는 수목 이외에는 제거해야하며 수분침투를 막을 수 있는 차수대책 및 배수시설이 필요할 것이다.

  • PDF

산해리도가 다른 무기산에 의한 토양 입자 표면 특성 (Characteristics of composition and surface morphology of soil particles influenced by inorganic acids with different acidity)

  • 이동성;이교석;신지수;이재봉;주리나;이명연;민세원;정덕영
    • 농업과학연구
    • /
    • 제42권3호
    • /
    • pp.191-199
    • /
    • 2015
  • We conducted this research to observe the changes of surface morphology and composition of clay minerals influenced by various concentrations of fluoric acid. Hydrofluoric acid (HA), a solution of hydrogen fluoride (HF) in water, is a colourless solution that is highly corrosive, capable of dissolving many materials, especially oxides. To do this, we treated several concentrations of HA on the ground soil samples collected from the agricultural experimental station located at Chungnam National University to observe the influence of fluoric acid on the changes of surface structures and elemental composition of clay particles. Generally, microscopic examination showed that the HA can not only attack an edge of clay particles but also start at any point where structural defects and weaknesses predisposed sites to acid. The orderly flake arrangement of clay minerals may reflect certain crystal symmetry elements. The ESEM-EDS results of element composition of clay particles influenced by HA indicated the changes of structures of clay minerals. It is also clear from the formation of etch figures and element composition of clay particles that the product layer at least partially dissolved or disintegrated in the presence of acid. Conclusively, the clay structures can be strongly influenced by concentrations of HA, resulting in changes of physical and chemical properties that can determine the behavior of solute transport as well as mobility of ions in soils.

해산복족류(海産腹足類)의 Paramyosin의 분리(分離) 및 그 특성(特性)에 관(關)한 연구(硏究) (Isolation and Characterization of Paramyosins of Marine Gastropods)

  • 변재형
    • 한국식품영양과학회지
    • /
    • 제2권1호
    • /
    • pp.1-21
    • /
    • 1973
  • The muscle of abalone, Notohaliotis discus (REEVE), and top-shell, Turbo cornutus Solander, were examined for protein composition. Then paramyosins which are known as one of the important structural protein of the muscle fibrils were isolated from the both muscle and their physico-chemical properties such as solubility, salting-out behaviour, intrinsic viscosity, ATPase activity, etc. involving amino acid composition and N-terminal amino acid residues were investigated to elucidate phylogenie characteristics more intensively from the viewpoint of comparative biochemistry. The analysis of protein composition resulted in the following estimations: abalone muscle; water-soluble protein of 22 %, salt-soluble protein, 34%, alkali-soluble protein, 20%, and stroma protein, 24%, and top-shell muscle; water-soluble protein of 16%, salt-soluble protein, 30%, alkali-soluble protein, 29%, and stroma protein, 25%, respectively. It is demonstrated in sedimentation analysis that paramyosin and myosin-actomyosin account for approximately 65% and 35% of the salt-soluble protein of abalone, and that the composition of both sediments in top-shell was approximately 70% and 30%, respectively. The ultracentrifugally homogenous paramyosins isolated essentially according to Bailey's ethanol-dried method from both of the muscle showed a $S^{\circ}_{20,w}$ of 3. 14s for abalone and a $S^{\circ}_{20,w}$ of 3.50s for top-shell. The both paramyosins were commonly rich in arginine, aspartic acid, and glutamic acid, while scarcely contained proline and tryptophan, in rough accord with the other paramyosins thus far reported. It is clear that these gastropod paramyosins showed of having the characteristic N-terminal amino acid residues such as N-aspartic acid, N-valine, N-serine, and N-threonine in common. The abalone paramyosin completely salted in with KCl beyond $0.35{\mu}$ and the top-shell paramyosin beyond $0.30{\mu}$. The abalone paramyosin was salted-out between 18% and 30% saturation of ammonium sulphate and the top-shell paramyosin between 22% and 29% saturation. The intrinsic viscosities at abalone and top-shell paramyosins at $25^{\circ}C$ were estimated respectively to be 3.1 dl/g and 2.6 dl/g showing somewhat higher than the values for some other paramyosins from lamellibranchs. In regard with the ATPase activity, the para myosin specimens did not exhibit any significant activity over through the pH conditions of 5 to 9.5. irrespective of the presence of $Ca^{++}$ or $Mg^{++}$. So was the case with the abalone paramyosin prepared by a slightly modified Bailey's wet-extraction method.

  • PDF

액체 윤활제 첨가제용 알킬 기능화된 산화 그래핀의 합성/분산 및 트라이볼로지적 특성 (Synthesis, Dispersion, and Tribological Characteristics of Alkyl Functionalized Graphene Oxide Nanosheets for Oil-based Lubricant Additives)

  • 최진영;김용재;이창섭
    • 공업화학
    • /
    • 제29권5호
    • /
    • pp.533-540
    • /
    • 2018
  • 그래핀은 표면 에너지가 낮고 원자단위의 얇은 물질로서 다양한 소재의 표면에 코팅시키거나 윤활제에 분산시켜 접착력과 마찰을 줄여주는 우수한 윤활유 첨가제로 보고되고 있다. 본 연구에서는 산화 그래핀 나노시트를 세 가지 종류의 염화알킬(butyl chloride, octyl chloride 및 tetradecyl chloride)을 이용하여 액체 윤활제 첨가제용 기능화 산화 그래핀(alkyl functionalized GO, FGO)을 제조하였다. 제조한 기능화 산화 그래핀의 화학적 및 구조적 특성은 Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Raman spectroscopy, scanning electron microscope (SEM), and transmission electron microscope (TEM)으로 분석하였다. 제조한 기능화 산화 그래핀은 PAO-0W40 오일에 0.02 wt%의 농도로 분산시켰으며, 트라이볼로지적 특성을 high frequency friction/wear tester로 분석한 결과, FGO-14이 첨가된 PAO-0W40 오일은 ball-on-disk의 직선왕복운동 하에서 기유에 비해 ~5.88%의 마찰계수와 ~3.8%의 마모 트랙 폭을 감소시킴으로써 내마모성이 향상됨을 확인하였다. 본 연구에서는 산화 그래핀의 성공적인 기능화와 더불어 다양한 탄화수소사슬 길이에 따른 분산 안정성 및 트라이볼로지적 특성의 향상을 입증하였다.

광학현미경과 투과전자현미경을 이용한 토끼와 닭 대퇴골의 미세구조 분석 (Microstructure Analysis of Rabbit and Chicken Femurs by Light Microscopy and Transmission Electron Microscopy)

  • 김창연;김은경;전태훈;남승원;김윤중
    • Applied Microscopy
    • /
    • 제40권3호
    • /
    • pp.155-162
    • /
    • 2010
  • 뼈는 단계별 (hierarchical) 구조를 가진 복합 재료이며 독특한 구조와 기계적 특성 때문에 재료공학 분야에서 많이 연구되어져 왔다. 뼈는 주로 hydroxyapatite, 콜라겐과 물로 구성된 층판형 유 무기 재료 복합체이다. 주요 무기물로써 hydroxyapatite로 잘 알려진 calcium phosphate를 통하여 뼈는 특유의 강도를 유지하게 된다. 본 실험에서는 광학 현미경(LM)과 투과전자현미경(TEM)을 이용하여 토끼와 닭 대퇴골의 구조를 연구하였다. 구성물질 분석은 대퇴골의 calcium, potassium, oxygen 분포 변화를 알아보는데 이용하였다. 실험은 두 구조 범위에 중점을 두었다: micro scale에서 치밀골의 배열을, nano scale에서 콜라겐 섬유와 apatite 결정을 관찰하였다. Micro scale에서 닭과 토끼 대퇴골 구조의 뚜렷한 차이점이 발견되었다. Nano scale에서는 apatite 결정의 모양과 크기 그리고 콜라겐의 배열을 비교 분석하였다. 그 결과 토끼와 닭은 종이 다름에도 불구하고 nano scale에서는 화학성분과 구조가 매우 유사한 것으로 나타났다.

Pt/AlGaN Schottky-Type UV Photodetector with 310nm Cutoff Wavelength

  • 김보균;김정규;박성종;이헌복;조헌익;이용현;한윤봉;이정희;함성호
    • 센서학회지
    • /
    • 제12권2호
    • /
    • pp.66-71
    • /
    • 2003
  • Pt/AlGaN Schottky-type UV photodetectors were designed and fabricated. A low-temperature AlGaN interlayer buffer was grown between the AlGaN and GaN film in the diode structure epitaxy to obtain crack-free AlGaN active layers. A comparison was then made of the structural, electrical, and optical characteristics of two different diodes: one with an AlGaN($0.5\;{\mu}m$)/n+-GaN(2 nm) structure (type 1) and the other with an AlGaN($0.5\;{\mu}m$)/AlGaN interlayer($150\;{\AA}$)/n+-GaN($3\;{\mu}m$) structure(type 2). A crack-free AlGaN film was obtained by the insertion of a low-temperature AlGaN interlayer with an aluminum mole fraction of 26% into the $Al_xGa_{1-x}N$ layer. The fabricated Pt/$Al_{0.33}Ga_{0.67}N$ photodetector had a leakage current of 1 nA for the type 1 diode and $0.1\;{\mu}A$ for the type 2 diode at a reverse bias of -5 V. For the photoresponse measurement, the type 2 diode exhibited a cut-off wavelength of 300 nm, prominent responsivity of 0.15 A/W at 280 nm, and UV-visible extinction ratio of $1.5{\times}10^4$. Accordingly, the Pt/$Al_{0.33}Ga_{0.67}N$ Schottky-type ultraviolet photodetector with an AlGaN interlayer exhibited superior electrical and optical characteristics and improved UV detecting properties.

기계적 밀링 및 화학적 추출법에 의해 제조한 Fe-N 및 Mn-Al계의 새로운 자성재료 (New Magnetic Phases of Fe-N and Mn-Al Alloys Produced by Mechanochemical Milling)

  • Kyu-Jin Kim;Tae-Hwan Noh;Kenji Suzuki
    • 한국자기학회지
    • /
    • 제4권4호
    • /
    • pp.347-354
    • /
    • 1994
  • 밀링 및 화학적 처리에 의해 제조된 소재의 구조해석 및 자기적 특성은 X선회절, 투과 전자현미경, 쾨스바우어 분광 및 비탄성 중성자산란 등의 측정에 의해 조사되었다. 질화처리에 의해 제조된 ${\gamma}'-Fe_{4}N$분말의 기계적 밀링처리에 의해, 대부분의 fcc ${\gamma}'-Fe_{4}N$상은 밀링 초기단계에 bct ${\alpha}'-Fe(N)$상으로 변태를 하며, 이러한 변태는 응력유기 마르텐사이트 변태로 규정지을 수 있다. 밀링처리에 제조한 bct ${\alpha}'-Fe(N)$ 초미세 분말의 열처리에 의해 673~773 K의 온도범위에서 ${\alpha}'-Fe_{16}N_{2}$상이 부분적으로 생성되며, 이로 인해 포화자화값이 증가한다. Mn-45, 70, 85 at.% Al의 조성으로 혼합한 분말은 기계적 합금화에 의해, Al은 부분적으로 ${\alpha}-Mn$상에 고용된다. 이로 인해 ${\alpha}-Mn$형 Mn-Al합금의 자기적 성질은 상자성에서 강자성으로 특성이 변하며, 특히 밀링처리한 Mn-70 at.% Al 계에 있어서 포화자화값은 11 emu/g을 나타낸다. 한편, 밀링처리한 Mn-85 at.% Al계에서 화학적 추출법을 이용하는 것에 의해 skeleton-type의 순 ${\alpha}-Mn$분말상을 제조한 결과 포화자화값은 36 emu/g으로 급격히 증가하였다.

  • PDF

Isolation and Characterization of Pepsin-soluble Collagens from Bones, Skins, and Tendons in Duck Feet

  • Kim, Hyun-Wook;Yeo, In-Jun;Hwang, Ko-Eun;Song, Dong-Heon;Kim, Yong-Jae;Ham, Youn-Kyung;Jeong, Tae-Jun;Choi, Yun-Sang;Kim, Cheon-Jei
    • 한국축산식품학회지
    • /
    • 제36권5호
    • /
    • pp.665-670
    • /
    • 2016
  • The objectives of this study were conducted to characterize pepsin-soluble collagen (PSC) extracted from bones (PSC-B), skins (PSC-S), and tendons (PSC-T) of duck feet and to determine their thermal and structural properties, for better practical application of each part of duck feet as a novel source for collagen. PSC was extracted from each part of duck feet by using 0.5 M acetic acid containing 5% (w/w) pepsin. Electrophoretic patterns showed that the ratio between α1 and α2 chains, which are subunit polypeptides forming collagen triple helix, was approximately 1:1 in all PSCs of duck feet. PSC-B had slightly higher molecular weights for α1 and α2 chains than PSC-S and PSC-T. From the results of differential scanning calorimetry (DSC), higher onset (beginning point of melting) and peak temperatures (maximum point of curve) were found at PSC-B compared to PSC-S and PSC-T (p<0.05). Fourier transform infrared spectroscopy (FT-IR) presented that PSC-S and PSC-T had similar intermolecular structures and chemical bonds, whereas PSC-B exhibited slight difference in amide A region. Irregular dense sheet-like films linked by random-coiled filaments were observed similarly. Our findings indicate that PSCs of duck feet might be characterized similarly as a mixture of collagen type I and II and suggest that duck feet could be used for collagen extraction without deboning and/or separation processes.

다양한 $MnO_{2}$ 구조에 따른 2차전지용 $Li_{x}Mn_{2}O_{4}$ 합성에 관한 연구 (A study on synthesis of $Li_{x}Mn_{2}O_{4}$ for asecondary battery with various $MnO_{2}$ structure)

  • 김익진;이영훈;이종호;이재한;장동환;이경희;고영신
    • 한국결정성장학회지
    • /
    • 제6권4호
    • /
    • pp.600-608
    • /
    • 1996
  • 리튬 이온이 intercalation되어 스핀넬 구조를 이루고 있는 $Li_{x}Mn_{2}O_{4}(0.2{\leq}x{\leq}2.0)$의 구조적 특성을 X-선 회절분석과 Li/1M $LiClO_{4}$-propylene carbonate solution/$Li_{x}Mn_{2}O_{4}$ 전지에서 이들의 구조적 특징에 의한 전기화학적 특성을 연구하였다. $Li_{x}Mn_{2}O_{4}$의 전기화학적 특성에 대한 조성과 반응온도의 영향은 상전이 현상과, 결정 상수 측정과 열분석에 의하여 연구하였다. 산처리 후 $Li_{x}Mn_{2}O_{4}$는 거의 순수한 ${\lambda}-MnO_{2}$구조로 상전이 되었으며 이때 격자상수 $a_{c}$가 8.255에서 $8.031\;{\AA}$으로 수축되었다. $Li_{x}Mn_{2}O_{4}$의 조성 범위가 $0.2{\leq}x{\leq}0.6$일 때 격자상수 $8.255\;{\AA}$의 단일상을 나타내며 3.9~3.7 V의 전위 평탄 영역을 나타낸다.

  • PDF

TiN 박막을 이용한 2층 무반사 코팅의 설계 및 층착 (Design and deposition of two-layer antireflection and antistatic coatings using a TiN thin film)

  • 황보창권
    • 한국광학회지
    • /
    • 제11권5호
    • /
    • pp.323-329
    • /
    • 2000
  • [공기 $ISiO_2ITiNI$ 유리]설계의 반사율이 가시광선 영역에서 0이 되는 TiN의 이상적인 복소수 굴절률을 계산하였다. TiN과 $SiO_2$의 각 층의 두께 변화에 따른 2층 무반사 코팅의 반사율을 전사모의하였으며, 그 결과 TiN의 두께를 조절함으로써 최저 반사율 영역의 폭과 반사율을 변화시킬 수 있었고, $SiO_2$층의 두께를 조절함으로써 반사율이 최저가 되는 중심을 이동시킬 수 있었다. RF 마크네트론 스퍼터링 방법으로 증착한 TiN 박막의 화학적, 구조적, 전기적 특성은 각각 Rutherford backscattering spectroscopy (RBS), atomic force microscope(AFM), 4점 탐침 측정기를 이용하였다. 또한 TiN 박막과 2층 무반사 코팅의 광학적 특성은 분광광도계와 variable angle spectroscopic ellipsometer(VASE)를 이용하여 조사하였다. AFM 측정 결과 TiN 박막의 rms 거칠기는 $9~10\AA$으로 비교적 박막의 표면은 균일하고, 높은 기판온도에서 증착한 TiN 박막의 비저항은 4점 탐침측정 결과 $360~730\mu$\Omega $ cm로 매우 낮으며, RBS측정 결과 Ti:O:N=1:0.65:0.95 비율로 산소가 포함되어 있음을 알았다. 이러한 TiN 박막의 특성과 전산모의 바탕으로 증착한 TiN층을 이용한 2층 무반사 무정전 코팅[공기 $ISiO_2ITiNI$ 유리]의 반사율은 440~650 nm영역에서 0.5% 미만이었다.

  • PDF