• Bulletin of the Korean Chemical Society
• /
• 제10권1호
• /
• pp.8-12
• /
• 1989

The polycrystalline powder of (BaLa)(MgMo)$O_6$ has been prepared at $1350^{\circ}C$ in a nitrogen flowing atmosphere. The powder X-ray diffraction pattern indicates that (BaLa)(MgMo)$O_6$ has a cubic perovskite structure ($a_0$ = 8.019(3) $\AA)$ with 1:1 ordering or $Mg^{2+}$ and $Mo^{5+}$ in the oxide lattice. The infrared spectrum shows two strong absorption bands with their maxima at 600(${\nu}3$) and 365(${\nu}4$) cm-1, which are attributed to $2T_{1U}$, modes of molybdenum octahedra MoO6 in the crystal lattice. According to the magnetic susceptibility measurement, the compound shows a paramagnetic behavior which follows the Curie-Weiss law below room temperature with the effective magnetic moment 1.60(1){$\mu}B$, which is consistent with that of spin only value ($1.73{\mu}B$) for $Mo^{5+}$ ($4d^1$ electronic configuration). From the thermogravimetric and X-ray diffraction analyses, it has been found that (BaLa)(MgMo)$O_6$ decomposes gradually into $BaMoO_4$, $MoO_3$ and unidentified phases above $900^{\circ}C$ in an ambient atmosphere, absorbing about 0.25 mole $O_2$ per mole of Mo ion, which also supports that oxidation state of $Mo^{5+}$ in the (BaLa)(MgMo)$O_6$.

• Bulletin of the Korean Chemical Society
• /
• 제18권11호
• /
• pp.1166-1172
• /
• 1997

[FeⅢ(BLPA)DBC]BPh4, a new functional model for the catechol dioxygenases, has been synthesized, where BLPA is bis((6-methyl-2-pyridyl)methyl)(2-pyridylmethyl)amine and DBC is 3,5-di-tert-butylcatecholate dianion. The BLPA complex has a structural feature that iron center has a six-coordinate geometry with N4O2 donor set. It exhibits EPR signals at g=5.5 and 8.0 which are typical values for the high-spin FeⅢ (S=5/2) complex with axial symmetry. The BLPA complex reacts with O2 within a few hours to afford intradiol cleavage (75%) and extradiol cleavage (15%) products which is very unique result of all [Fe(L)DBC] complexes studied. The iron-catecholate interaction of BLPA complex is significantly stronger, resulting in the enhanced covalency of the metal-catecholate bonds and low energy catecholate to FeⅢ charge transfer bands at 583 and 962 nm in CH3CN. The enhanced covalency is also reflected by the isotropic shifts exhibited by the DBC protons, which indicate increased semiquinone character. The greater semiquinone character in the BLPA complex correlates well with its high reactivity towards O2. Kinetic studies of the reaction of the BLPA complex with 1 atm O2 in CH3OH and CH2Cl2 under pseudo-first order conditions show that the BLPA complex reacts with O2 much slower than the TPA complex, where TPA is tris(2-pyridylmethyl)amine. It is presumably due to the steric effect of the methyl substituent on the pyridine ring. Nevertheless, both the high specificity and the fast kinetics can be rationalized on the basis of its low energy catecholate to FeⅢ charge transfer bands and large isotropic NMR shifts for the BLPA protons. These results provide insight into the nature of the oxygenation mechanism of the catechol dioxygenases.

• 공업화학
• /
• 제22권3호
• /
• pp.332-335
• /
• 2011

친환경 재료에 대한 관심이 급증함에 따라 재료의 구조적 기능성 및 투수성을 동시에 갖는 다공성 콘크리트의 활용이 증가되고 있다. 본 연구에서는 다공성 콘크리트에 제올라이트를 혼합하여 다양한 활용도를 갖는 다기능형 옥석 제품의 수질정화 능력을 평가하여 친환경제품으로서의 적합성을 검토하였다. 흐름이 없는 시험용 수조에서 시간에 따른 오염도 제거율은 T-N (70.6%), T-P (67.0%), BOD (57.7%), TOC (50.6%) 순으로 우수한 수질정화 특성을 보였다. 또한 유입 및 유출이 가능한 비점오염원에서 시간에 따른 유출부에서의 수질오염도 및 중금속 농도의 제거율은 Zn (99.9%), Pb (90.0%), BOD (69.2%), COD (33.5%) 순으로 흐름이 없는 경우에서의 오염도 제거율보다 수질정화 특성이 우수한 것으로 나타났다. 따라서 다공성 콘크리트 시설물을 실제 하천 등에 시공했을 시에 우수한 오염도 제거율을 바탕으로 친환경제품으로 적합함을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.74-80
• /
• 2023

Gallium oxide (Ga₂O₃) thin films were grown on c-, a-, m-, r-plane sapphire substrates using a mist chemical vapor deposition system. Various growth temperature range of 400~600℃ was applied for Ga₂O₃ thin film deposition. Then, several structural properties were characterized such as film thickness, crystal phase, lattice orientation, surface roughness, and optical bandgap. Under the certain growth temperature of 500℃, all grown Ga₂O₃ featured rhombohedral crystal structures and well-aligned preferred orientation to sapphire substrate. The films grown on c-and r-plane sapphire substrates, showed low surface roughness and large optical bandgap compared to those on a-and m-plane substrates. Therefore, various sapphire orientation can be potentially applicable for future Ga₂O₃-based electronics applications.

• Elastomers and Composites
• /
• 제46권4호
• /
• pp.277-283
• /
• 2011

본 연구에서는 유리구슬을 사용하여 일반반사지 및 고휘도 반사지를 제조하여 그들의 반사성능과 물리적 특성을 조사하였다. 유리구슬형 재귀반사 시트의 제조 방법에는 봉입렌즈형과 캡슐렌즈형의 두 가지로 구분될 수 있는데 유리구슬이 공기에 노출되는지 그렇지 않은지를 통해서 구분한다. 유리구슬 위를 덮고 있는 층이 있는 봉입렌즈형은 유리구슬 위의 한 개의 층으로 된 캡슐렌즈형에 비해 악천 후에도 휘도 변화가 거의 없다. 유리구슬의 도포량에 따라 휘도가 달라지므로 최적의 도포량을 조사하였고, 다양한 색상을 지니는 유리구슬 형태의 봉입렌즈형 재귀반사 시트와 캡슐렌즈형 재귀반사 시트를 제조하여 입사각과 관찰각에 따른 재귀반사 시트의 휘도를 조사하여 비교하였다. 공기에 노출되는 캡슐렌즈형 백색 재귀반사 시트의 휘도가 $210.4cd/1x{\cdot}m^2$으로 봉입렌즈형의 $74cd/1x{\cdot}m^2$ 보다 높은 것으로 나타났다. 그리고 세탁전과 후의 휘도변화를 통하여 재귀반사 시트의 세탁력과 점착성능을 분석하였는데, 캡슐렌즈형은 세탁 후 유리구슬의 수가 줄었고 또한 알루미늄 증착면이 훼손되어 증착된 부분이 일어난 것을 확인할 수 있었다.

• 보존과학연구
• /
• 통권25호
• /
• pp.171-195
• /
• 2004

This research presents an evaluation of the weathering and deterioration state of the Wanggung-ri five-storied stone pagoda in the Iksan (National Treasure No. 289) and suggests conservational schemes. A deterioration map of the pagoda was drawn from the aspects of petrological, physical, chemical, biological, structural and artificial weathering.The rock properties consisting of the pagoda were medium-grained biotite granite that had leucocratic phenocryst developed in parts. The body of each story suffered severely from the secondary contamination that turned the colors into light grey, pitch dark, yellowish brown, and reddish brown as well as granular decomposition, exfoliation and peel-off. The roof stones were heavy exfoliated or peeled off in most of the cases. In addition to the fine cracks, there were layered cracks on the corners. The roof stones of the3rd and 4th story in the north and west side had some stones fall-off, while those of the 2ndstory in the north side had steel reinforcement filled for a fixing purpose. Those of the 5th story showed big gaps that must have originated from cracks and were easily subject to granular decomposition and rainfall. The inside clay filler was missing in the lower part of the roof stones of the 4th and 5th story and the supporting stones, which were thus covered by light grey or pitch dark sediments. The contact area of the materials was about 70 % in the parts where there was a space due to the filler missing and washigher than 90 % in the lower parts of the pagoda. About 90 % or more of the roof stones surface of each story were covered by aerial plants that formed a thick biological mat. Thus it seemed necessary to come up with the conservational measures to remove the plans living on the surface of the stone materials, with the plans to prevent rain from falling inside, and with the water repellent and hardening treatments to postpone the surface weathering of the rock properties. All those measures and plans must be based on the results of long-term monitoring and thorough detail investigations.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.98.2-98.2
• /
• 2010

$CuInS_2$ thin films were synthesized by sulfurization of Cu/In Stacked elemental layer deposited onto glass Substrates by vacuum furnace annealing at temperature 200[$^{\circ}C$]. And structural and electrical properties were measured in order to certify optimum conditions for growth of the ternary compound semiconductor $CuInS_2$ thin films with non-stoichiometry composition. $CuInS_2$ thin film was well made at the heat treatment 200[$^{\circ}C$] of SLG/Cu/In/S stacked elemental layer which was prepared by thermal evaporator, and chemical composition of the thin film was analyzed nearly as the proportion of 1 : 1 : 2. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM and hall measurement system. At the same time, carrier concentration, hall mobility and resistivity of the thin films was $9.10568{\times}10^{17}$ [$cm^{-3}$], 312.502 [$cm^2/V{\cdot}s$] and $2.36{\times}10^{-2}$ [${\Omega}{\cdot}cm$], respectively.

• 펄프종이기술
• /
• 제45권3호
• /
• pp.59-68
• /
• 2013

The cotton contains various impurities such as protein, wax, pectins, coloring matter, even though cotton has been a major source of pure cellulose. The purification processes have been commonly applied to obtain the pure cellulose. However the excessive purification treatments could lead to the damage in the cellulose structure which could result in the degradation of cellulose and the limited application of cotton cellulose. In this study, the changes in cellulose structural properties such as crystallinity and DP(degree of polymerization) by the various conditions of the purification processes were investigated. The less toxic agents such as hydrogen peroxide and sodium silicate were applied for the purification treatment in this study. The increase in the process times, the temperature and the applied amount of chemical agents resulted in the more purified cellulose. The DP of cotton cellulose was increased at the first weak conditions by the reduction of small molecules such as pectin, wax, and so on. Especially the 2 % addition amount of $H_2O_2$ with $Na_2SiO_3$ resulted in the higher value in the DP and the brightness compared to the 1.5 % addition amount of $H_2O_2$. However, the 4 % addition amount of $H_2O_2$ with $Na_2SiO_3$ showed the decreased value because of excessive treatment. In case of the changes in the crystallinity (Gjk), the highest value of the crystallinity was obtained by the 2% addition amount of $H_2O_2$ on the cotton cellulose, which showed similar with the change in the DP.

• 멤브레인
• /
• 제24권2호
• /
• pp.88-99
• /
• 2014

인구의 증가와 산업의 발전으로 물에 대한 수요가 점차 증가하고 있는 상황에서 안전하고 지속가능한 수자원을 확보하기 위한 방법으로 분리막을 이용한 수처리가 널리 사용되고 있다. 수처리장에서 가장 널리 사용되고 있는 분리막 중 하나인 폴리아마이드 분리막은 분리막 공정 전 단계에서 수행되는 염소살균 처리 후에 잔류하는 염소에 의해 화학적/구조적으로 영향을 받고 성능이 변화하는 것으로 알려져 있다. 본 논문에서는 pH에 따라 수중에 용해되는 염소의 종변화 및 염소에 노출시 폴리아마이드 분리막의 표면 성질 변화와 성능변화의 원리를 다루었다.

• 한국전기전자재료학회논문지
• /
• 제27권6호
• /
• pp.394-398
• /
• 2014

We fabricated the electrolyte-dielectric-metal (EDM) sensor on the base of AAO (anodic aluminum oxide) template with variation of the anodizing temperature. When a surface is immersed or created in an aqueous solution, a discontinuity is formed at the interface where such physicochemical variables as electrical potential and electrolyte concentration change significantly from the aqueous phase to another phase. Because of the different chemical potentials between the two phases, charge separation often occurs at the interfacial region [1]. This interfacial region, togeter with the charged surface, is usually known as the electrical double layer (EDL) [2]. The structural and electrochemical properties of AAO sensor were investigated for applications in capacitive pH sensors. To change the thickness of the AAO template, the anodizing temperature was varied from $5^{\circ}C$ to $20^{\circ}C$, the thickness of the AAO template invreased from 300 nm to 477 nm. The pH sensitivity of sensors with the anodizing temperature of $20^{\circ}C$ showed the highest value of 56.4 mV/pH in the pH range of 3 to 11. The EDM sensor with the anodizing temperature of $20^{\circ}C$ exhibited the best long-term stability of 0.037 mV/h.