• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2769-2773
• /
• 2013

Red phosphors $Ca_{(1-1.5x)}Eu_xWO_4$ and $Ca_{(1-2x)}Eu^_xNa_xWO_4$ were synthesized with various concentrations x of $Eu^{3+}$ ions by using a solid-state reaction method. The crystal structure of the red phosphors were found to be a tetragonal scheelite structure with space group $I4_1/a$. X-ray diffraction (XRD) results show the (112) main diffraction peak centered at $2{\theta}=28.71^{\circ}$, and indicate that there is no basic structural deformation caused by the vacancies ${V_{Ca}}^{{\prime}{\prime}}$ or the $Eu^{3+}$ (and $Na^+$) ions in the host crystals. Densities of $Ca_{(1-1.5x)}Eu_xWO_4$ were measured on a (helium) gas pycnometer. Comparative results between the experimental and theoretical densities reveal that $Eu^{3+}$ (and $Na^+$) ions replace the $Ca^{2+}$ ions in the host $CaWO_4$. Also, the photoluminescence (PL) emission and photoluminescence excitation (PLE) spectra show the optical properties of trivalent $Eu^{3+}$ ions, not of divalent $Eu^{2+}$. Raman spectra exhibit that, without showing any difference before and after the doping of activators to the host material $CaWO_4$, all the gerade normal modes occur at the identical frequencies with the same shapes and weaker intensities after the substitution. However, the FT-IR spectra show that some of the ungerade normal modes have shifted positions and different shapes, caused by different masses of $Eu^{3+}$ ions (or $Na^+$ ions, or ${V_{Ca}}^{{\prime}{\prime}}$ vacancies) from $Ca^{2+}$.

• KSBB Journal
• /
• 제13권5호
• /
• pp.554-560
• /
• 1998

Biopolymer from alkaline-tolerant Bacillus so. was purified, and its physico-chemical and structural properties were investigated. Crude biopolymer, precipitated by acetone from culture broth was fractionated into two fractions by gel chromatography on Sephadex G-200. Among two fractions, one fraction(PS I), which an acidic biopolymer precipitated by the CPC(cetylpyridinium chloride) treatment was studied further. PS I fraction had carboxyl groups and was positive at color reaction of sugar. PS I fraction also showed UV absorbance at 190-225nm. The purified acidic biopolymer was composed of 4% glucose, 8% glucosamine and 88% glutamic acid. Sugar components of the purified acidic biopolymer seemed to be linked to PGA(polyglutamic acid) which existed in the from of ${\gamma}$-peptide bond. By the results of Smith degradation of sugar components, glucose and glucosamine was bound by 1,3 glocosidic linkage. Therefore, this biopolymer was a glycopeptide, oligosaccaride ${\gamma}$-PGA. We concluded that the equivalent weight and the molecular weight of this biopolymer were estimated as about 171 and 5x105 dalton, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.2045-2050
• /
• 2011

Using first principles density functional theory the formation energies of various binary compounds of lithium graphite and its homologues were calculated. Lithium and graphite react to form $Li_1C_6$ (+141 mV) but not form $LiC_4$ (-143 mV), $LiC_3$ (-247 mV) and $LiC_2$ (-529 mV) because they are less stable than lithium metal itself. Properties of structure and reaction potentials of $C_5B$, $C_5N$ and $B_3N_3$ materials as iso-structural graphite were studied. Boron and nitrogen substituted graphite and boron-nitrogen material as a iso-electronic structured graphitic material have longer graphene layer spacing than that of graphite. The layer spacing of $Li_xC_6$, $Li_xC_5B$, $Li_xC_5N$ materials increased until to x=1, and then decreased until to x=2 and 3. Nevertheless $Li_xB_3N_3$ has opposite tendency of layer spacing variation. Among various lithium compositions of $Li_xC_5B$, $Li_xC_5N$ and $Li_xB_3N_3$, reaction potentials of $Li_xC_5B$ (x=1-3) and $Li_xC_5$ (x=1) from total energy analyses have positive values against lithium deposition.

• 한국결정성장학회지
• /
• 제18권4호
• /
• pp.155-159
• /
• 2008

본 연구에서는 금속 Zn 팰렛을 원료 물질로 이용하여 열화학기상증착법으로 마이크로 크기의 프리스탠딩 ZnO/Zn 코어셀 다면체 구조물을 합성하였다. 마이크로 크기로 성장된 ZnO/Zn 코어셀 다면체의 형태와 구조적인 특성을 분석하기 위해서 주사전자현미경과 투과전자현미경을 이용하였다. 성장된 마이크로 크기의 다면체는 단결정 ZnO 나노막대 배열에 의해 둘러싸인 단결정 금속 Zn로 구성되어 있음을 확인할 수 있었다. 마이크로 크기의 단결정 Zn는 육방정 결정구조로 이루어져 있으며, 표면을 구성하고 있는 c-축 배향된 ZnO 나노막대가 10 nm와 100 nm 이하의 직경과 높이를 각각 가지며 육방정 결정구조의 단결정임을 확인하였다.

• 한국진공학회지
• /
• 제20권4호
• /
• pp.271-275
• /
• 2011

본 논문은 고휘도 발광소자의 특성을 높이기 위한 p-GaN 박의 홀농도 향상을 연구하였다. 우리는 metal organic chemical vapor deposition 법을 이용하여 Antimony (Sb)가 p-GaN의 홀농도 향상에 도움을 주는 것을 확인하였다. Atomic force microscope 측정을 통해 Sb가 계면활성제처럼 역할을 함으로써 p-GaN의 2차원 성장이 촉진됨을 알 수 있었다. 또한 X-ray diffraction 결과 [002] 면과 [102] 면의 반폭치가 Sb 도핑과 함께 줄어드는 것을 통해 Edge과 Screw 전위의 감소와 photoluminescence 결과에서 450~500 nm 청색 파장 영역에서 발광의 세기가 현저히 줄어드는 것으로 보아 질소 공극이 감소되는 것이 홀농도 향상의 주된 원임임을 알 수 있었다. Trimethylantimony가 10 ${\mu}mol/min$일 때 홀농도는 최대가 되었고 그때 홀농도는 $5.4{\times}10^{17}cm^{-3}$이었다.

• 대한화학회지
• /
• 제40권1호
• /
• pp.1-10
• /
• 1996

Gibbs' adsorption isotherms을 이용하여, 계면에서 보조계면활성제 분자의 분자 면적과 계면장력거동에 미치는 ethylene oxide(EO)와 propylene oxide(PO)의 영향을 조사하였다. 일반식 $C_4H_9O(EO)m(PO)_nH$를 갖는 alcohol들의 보조계면활성제로서의 특성을 연구하였는데, 이 alcohol들은 일반적으로 사용되는 보조계면활성제에 비해서 분자량이 크며 계면활성 또한 큰 특성을 갖고있다. EO와PO의 몰수와 이들이 첨가된 상대적 순서는 물/기름 계면에서 alcohol 분자의 분자면적과 계면장력 특성에 큰 영향을 미치는 것을 알 수 있었으며, 다음의 결론을 얻었다. 1) PO는 EO에 비해서 계면흡착 효율은 낮으나, 계면장력 저하 능력은 더 크다. 2) 분자량은 같으나 구조가 다른 분자들, 즉 EO와PO의 첨가 순서만 다른 분자들의 경우는, 계면흡착 효율이 큰 (계면에서의 분자면적이 작은) 분자들이 계면장력 저하 능력이 더 크다. 3) 동일한 친유기에 EO나 PO가 많이 첨가될수록, 분자들의 계면에서의 분자면적은 커지나 계면장력 저하능력도 커진다.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3695-3702
• /
• 2013

A nickel(II) complex $[Ni(H_2biim)_2(H_2O)_2](ClO_4)_2{\cdot}H_2O$ (1) of biimidazole ligand has been synthesized and characterized (Where $H_2biim$ = 2,2'-biimidazole). The single crystal X-ray diffraction of the complex shows a dimeric structure with six coordinated psudo-octahedral geometry. The cyclic voltammograms of complex exhibited one quasireversible reduction wave ($E_{pc}=-0.61V$) and an irreversible oxidation wave ($E_{pa}=1.28V$) in DMF solution. The interaction of the complex with Calf-Thymus DNA (CT-DNA) has been investigated by absorption and fluorescence spectroscopy. The complex is an avid DNA binder with a binding constant value of $1.03{\times}10^5M^{-1}$. The results suggest that the nickel(II) complex bind to CT-DNA via intercalative mode and can quench the fluorescence intensity of EB bind to CT-DNA with $K_{app}$ value of $3.2{\times}10^5M^{-1}$. The complex also shown efficient oxidative cleavage of supercoiled pBR322 DNA in the presence of hydrogen peroxide as oxidizing agent. The DNA cleavage by complex in presence of quenchers; viz. DMSO, KI, $NaN_3$ and EDTA reveals that hydroxyl radical or singlet oxygen mechanism is involved. The complex showed invitro antimicrobial activity against four bacteria and two fungi. The antimicrobial activity was nearer to that of standard drugs and greater than that of the free ligand.

• 한국전기전자재료학회논문지
• /
• 제30권10호
• /
• pp.625-630
• /
• 2017

ZnS was chemically deposited as a buffer layer alternative to CdS, for use as a Cd-free buffer layer in $Cu(In_{1-x}Ga_x)Se_2$ (CIGS) solar cells. The deposition of a thin film of ZnS was carried out by chemical bath deposition, following which the structural and optical properties of the ZnS layer were studied. For the experiments, zinc sulfate hepta-hydrate ($ZnSO_4{\cdot}7H_2O$), thiourea ($SC(NH_2)_2$), and ammonia ($NH_4OH$) were used as the reacting agents. The mole concentrations of $ZnSO_4$ and $SC(NH_2)_2$ were fixed at 0.03 M and 0.8 M, respectively, while that of ammonia, which acts as a complexing agent, was varied from 0.3 M to 3.5 M. By varying the mole concentration of ammonia, optimal values for parameters like optical transmission, deposition rate, and surface morphology were determined. For the fixed mole concentrations of $0.03M\;ZnSO_4{\cdot}7H_2O$ and $0.8M\;SC(NH_2)_2$, it was established that 3.0 M of ammonia could provide optimal values of the deposition rate (5.5 nm/min), average optical transmittance (81%), and energy band gap (3.81 eV), rendering the chemically deposited ZnS suitable for use as a Cd-free buffer layer in CIGS solar cells.

• 대한화학회지
• /
• 제50권3호
• /
• pp.243-246
• /
• 2006

박막은 Pt/Ti/SiO2/Si 기판 위에 구연산 졸을 이용하여 spin coating에 의해 제작하였다. 기판위에 코팅된 구연산 졸을 380oC에서 15분간 건조시킨 후 750oC에서 10분간 열처리하여 박막을 얻었다. 얻어진 박막은 X-선 회절분석 결과 R3m의 결정구조를 가짐을 알수 있었고, 전기화학적 특성의 측정결과 1차 방전용량은 0.35Ah/cm2-m로 측정되었다.

• 대한화학회지
• /
• 제50권3호
• /
• pp.190-195
• /
• 2006

순수 물에서 음이온 계면활성제인 Sodium dodecylbenzenesulfonate(DBS)와 비이온 계면활성제인 Polyoxyethylene(4) lauryl ether(Brij 30)의 혼합계면활성제의 임계미셀농도(CMC)와 반대이온의 결합상수(B)값을 288 K에서 308 K까지의 범위에서 DBS의 겉보기 몰분율(1)의 함수로서 전도도법과 표면장력계법으로 측정하였다. 측정한 CMC의 온도의존성으로부터 DBS/Brij 30 혼합계면활성제의 미셀화 현상에 대한 여러 가지 열역학적 함수값들(Smo, Hmo 및 Gmo)을 계산하고 분석하였다. 그 결과, 측정범위 내에서 Gmo은 모두 음의 값을 그리고 Smo은 모두 양의 값을 나타내었다. 이에 반하여 Hmo은 측정한 온도와 1의 값에 따라 양 혹은 음의 값을 나타내었다.