• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.857-860
• /
• 1998

Reinforced concrete structure is deteriorated, as time goes on. So many repair materials are developed for the repair. But repair materials have not been adequately applied so far. Because the datum which evaluated the repair materials are not sufficient. The object of this study is estimation f repair materials that is in general use and establish method of application. To acquire the result, we have made experiments on chemical attack, carbonation and chloride permeability test. The carbonation and chloride permeability are very different. Some repair materials are poorer than portland cement mortar.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.2
• /
• pp.111-122
• /
• 2013

The steam explosion-chemical pretreatment is a more effective wood pretreatment technique than the conventional physical pretreatment by accelerating reactions during the pretreatment process. In this paper, two-stage pretreatment processes of hardwood were investigated for its enzymatic hydrolysis and the succinic acid yield from the pretreated solid. The first stage pretreatment was performed under conditions of low severity to optimize the amount of solid recovery. In the second stage pretreatment washed solid material from the first stage pretreatment step was impregnated again with chemical (alkaline or chlorine-based chemicals) to remove a portion of the lignin, and to make the cellulose more accessible to enzymatic attack. The effects of pretreatment were assessed by enzymatic hydrolysis and fermentation, after the two stage pretreatments. Maximum succinic acid yield (16.1 g $L^{-1}$ and 77.5%) was obtained when the two stage pretreatments were performed at steam explosion -3% KOH.

• Advances in materials Research
• /
• v.9 no.3
• /
• pp.219-231
• /
• 2020

The aim of this study is to investigate the durability of fly ash based geopolymer mortar with and without protective coatings in aggressive chemical environments. The source materials for geopolymer are Fly ash and Ground Granulated Blast furnace Slag (GGBS) and they are considered in the combination of 80% & 20% respectively. Two Molarities of NaOH solution were considered such as 8M and 10M. The ratio of binder to sand and Sodium silicate to Sodium hydroxide solution (Na₂SiO₃/NaOH) are taken as 1:2 and 2 respectively. The alkaline liquid to binder ratio is 0.4. Compressive strength tests were conducted at various ages of the mortar specimens. In order to evaluate the performance of coatings on geopolymer mortar under aggressive chemical environment, the mortar specimens were coated with two different types of coatings such as epoxy and Acrylic. They were then subjected to different chemical environments by immersing them in 10% standard solutions of each ammonium nitrate, sodium chloride and sulphuric acid. Drop in compressive strength as a result of chemical exposure was considered as a measure of chemical attack and the drop in compressive strength was measured after 30 and 60 days of chemical exposure. The compressive strength results following chemical exposure indicated that the specimens containing the acrylic coating proved to be more resistant to chemical attacks. The control specimen without coating showed a much greater degree of deterioration. Therefore, the application of acrylic coating was invariably much more effective in improving the compressive strength as well as the resistance of mortar against chemical attacks. The results also indicated that among all the aggressive attacks, the sulphate environment has the most adverse effect in terms of lowering the strength.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.65-69
• /
• 2003

The kinetic and chemical mechanisms of AChE-catalyzed hydrolysis of short-chain thiocholine esters are relatively well documented. Up to propanoylthiocholine (PrTCh) the chemical mechanism is general acid-base catalysis by the active site catalytic triad. The chemical mechanism for the enzyme-catalyzed butyrylthiocholine(BuTCh) hydrolysis shifts to a parallel mechanism in which general base catalysis by E199 of direct water attack to the carbonyl carbon of the substrate. [Selwood, T., et al. J. Am. Chem. Soc. 1993, 115, 10477- 10482] The long chain thiocholine esters such as hexanoylthiocholine (HexTCh), heptanoylthiocholine (HepTCh), and octanoylthiocholine (OcTCh) are hydrolyzed by electric eel acetylcholinesterase (AChE). The kinetic parameters are determined to show that these compounds have a lower Michaelis constant than BuTCh and the pH-rate profile showed that the mechanism is similar to that of BuTCh hydrolysis. The solvent isotope effect and proton inventory of AChE-catalyzed hydrolysis of HexTCh showed that one proton transfer is involved in the transition state of the acylation stage. The relationship between the dipole moment and the Michaelis constant of the long chain thiocholine esters showed that the dipole moment is the most important factor for the binding of a substrate to the enzyme active site.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3274-3278
• /
• 2012

The kinetic studies on the reactions of phenyl N-phenyl phosphoramidochloridate (8) with substituted anilines ($XC_6H_4NH_2$) and deuterated anilines ($XC_6H_4ND_2$) have been carried out in acetonitrile at $60.0^{\circ}C$. The obtained deuterium kinetic isotope effects (DKIEs; $k_H/k_D$) are huge secondary inverse ($k_H/k_D$ = 0.52-0.69). A concerted mechanism is proposed with a backside attack transition state (TS) on the basis of the secondary inverse DKIEs and the variation trends of the $k_H/k_D$ values with X. The degree of bond formation in the TS is really extensive taking into account the very small values of the DKIEs. The steric effects of the two ligands on the rates are extensively discussed for the aminolyses of the chlorophosphate-type substrates on the basis of the Taft equation.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.843-847
• /
• 2012

The nucleophilic substitution reactions of dibutyl chlorothiophosphate (4S) with substituted anilines ($XC_6H_4NH_2$) and deuterated anilines ($XC_6H_4ND_2$) are investigated kinetically in acetonitrile at $55.0^{\circ}C$. The obtained deuterium kinetic isotope effects (DKIEs;$k_H/k_D$) are primary normal ($k_H/k_D$ = 1.10-1.35). A concerted mechanism involving predominant frontside nucleophilic attack is proposed on the basis of the primary normal DKIEs and selectivity parameters. Hydrogen bonded, four-center-type transition state is proposed. The steric effects of the two ligands on the anilinolysis rates of the chlorothiophosphates are discussed. The anilinolyses of P=S systems are compared with those of their P=O counterparts on the basis of the reactivities, thio effects, selectivity parameters, and DKIEs.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.6
• /
• pp.829-831
• /
• 2003

Various theoretical studies of σ-bond activation of organic molecules by transition metal complexes arereviewed. In the homolytic σ-bond activation, the d orbital energy level of the central metal is an importantfactor, as well known. At the same time, the electron-withdrawing substituent which stabilizes the sp3 orbitalaccelerates the homolytic σ-bond activation. In the heterolytic C-H σ-bond activation of RH by $MXL_n$, the XHbond formation is an important driving force, where $MRL_n$ and HX are formed as products. The heterolytic σ-bond activation is also understood in terms of the electrophilic attack of the metal center to the substrate.

• Korean journal of applied entomology
• /
• v.22 no.2 s.55
• /
• pp.67-73
• /
• 1983

Despite the great importance of chemical insecticides, with the ever increasing resistance of pest insects to chemical insecticides and the growing concern over environmental pollution, it becomes evident that the problem of pest attack on crops cannot be solved by anyone system. Under these circumstances, main pathogens of insects, i.e., viruses, bacteria, fungi and protozoa, have been studied to control many insect pests. Some of these pathogens are now being produced as microbial insecticides at the rate of hundreds of tons per year in the world. Some microbial insecticides are very effective against numerous or target insects under suitable environmental condition, and microbial control has been played an important role in integrated control program. They have many unique properties such as selectivity, multiplication and harmless to higher animals. However, we must be aware also that there are many problems to be solved, such as safety, persistence and difficulty of efficacy, etc_ on the microbial insecticides.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04b
• /
• pp.613-617
• /
• 1998

This study deals with the effect on adhesive strength properties of fiber sheet layer and maintenance position of coccrete structure reinforced using epoxy resin carbon and aramit fiber sheet. Properties of epoxy resin adhesive strength of the concrete bridge slab, tunnel and wall etc. reinforced using fiber sheet under many different environment change according to condition of concrete substrate, temperature, moisture, curing, cleaning, and chemical effects and so on. The purpose of this study is that it makes the estimation value of adhesive strength of concrete substrate and fiber sheet reinforcing layer penetrated epoxy resin under high temperature(9$0^{\circ}C$), chemical attack and condition of curing.

• Journal of Sensor Science and Technology
• /
• v.23 no.4
• /
• pp.217-223
• /
• 2014

Nerve agents are major chemical warfare agents with the "G series" and "V series" being the most widely known because of their lethal effect. Although not conspicuously used in major wars, the potential detrimental impact on modern society had been revealed from the sarin terror attack on Tokyo subway, which affected thousands of people. In this mini-review, major nerve agents of the "G series" and "V series" have been described along with various types of their detection methods. The physical properties and hydrolysis mechanisms of the major nerve agents are discussed since these are important factors to be considered in choosing detection methods, and specifying the procedures for sample preparations in order to enhance detection precision. Various types of extraction methods, including liquid-phase, solid-phase, gas-phase and solid-phase microextraction (SPME), are described. Recent development in the use of gas sensors for detecting nerve agents is also summarized.