• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.591-598
• /
• 2013

A series of chiral prolinamide compounds with pyridine-2, 6-dicarboxylic acid moieties derived from L-proline have been designed and synthesized, their catalytic properties for direct asymmetric aldol reactions were also studied in this article. These catalysts gave the aldol product in high yield (87%) and high enantioselectivity, up to 85%, of the anti-structure at room temperature but gave disappointing results at a lower temperature or when additive was added. Conditions, including solvents, temperature and additives were screened for the reactions. Moreover, the influence of presence of water on yield and stereoselectivity was also discussed.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.270-274
• /
• 2004

Blends of poly(l-lactide) (PLA) and low density polyethylene (LDPE) were prepared by melt mixing in order to improve the brittleness of PLA. A reactive compatibilizer with glycidyl methacrylate (GMA), PE-GMA, was required as a compatibilizer due to the immiscibility between PLA and LDPE. It contributes to reduce the domain size of dispersed phase and enhance the tensile properties of PLA/LDPE blends, especially for PLA matrix blends. A reaction product between PLA and PE-GMA, which was formed during melt-mixing and considered to act as a reactive compatibilizer, was characterized using $ ^1H-NMR$ spectroscopy.

• Natural Product Sciences
• /
• v.25 no.2
• /
• pp.81-91
• /
• 2019

Marrubium vulgare, plant species belonging to Marrubium genus, is widespread in the Mediterranean areas, introduced elsewhere and also cultivated in many countries. Its oil is recognized to possess a considerable biological activities with varied chemical composition. This paper aims to overview the chemical composition and biological activities of M. vulgare essential oil's considered as a medicinal plant, widely used in folk medicine overall the world. In essential oils of M. vulgare, germacrene D, ${\beta}$-caryophyllene, ${\beta}$-bisabolene, bicyclogermacrene and carvacrol are generally considered as either mains or minor constituents and each species presents its own composition. Sesquiterpenoids were the dominant fraction while monoterpenoids were present in appreciable or in trace amount. Oxygenated fractions dominated in monoterpenes however, hydrocarbon fraction overpowered in sesquiterpenes. These oils are biologically active, they exhibit an antioxidant and antimicrobial activities and other activities. Due to the variability of composition of essential oil, further studies are necessary, particularly regarding their chemical's which may cause an important change in the biological activities of oils and probably defined different chemotype.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.617-622
• /
• 2011

A simple method has been successfully applied to extract squalene and its byproducts alkoxyglycerol from deep-sea shark liver oil. GC-MS was used to determine the extraction amount of the squalene and alkoxyglycerol, and the content of them in rough product and refined product were compared. The physical property of squalene was identified by measuring the pH value, peroxide value and iodine value. Under optimum extraction conditions, the amount of squalene and alkoxyglycerol increased 35.0% and 21.9%, respectively, while the amount of fatty acid decreased from 61% to 4%, especially, the amount of palmitic acid and oleic acid remarkably decreased. Large amount of peroxide and acid were removed from shark liver oil after refining process. Because squalene contains lots of double bond, so the value of iodine is much higher than squalane.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.4
• /
• pp.299-305
• /
• 2006

Aromatic L-amino acid transaminase is an enzyme that is able to transfer the amino group from L-glutamate to unnatural aromatic ${\alpha}-keto$ acids to generate ${\alpha}-ketoglutarate$ and unnatural aromatic L-amino acids, respectively. Enrichment culture was used to isolate thermophilic Bacillus sp. T30 expressing this enzyme for use in the synthesis of unnatural L-amino acids. The asymmetric syntheses of L-homophenylalanine and L-phenylglycine resulted in conversion yields of >95% and >93% from 150 mM 2-oxo-4-phenylbutyrate and phenylglyoxylate, respectively, using L-glutamate as an amino donor at $60^{\circ}C$. Synthesized L-homophenylalanine and L-phenylglycine were optically pure (>99% enantiomeric excess) and continuously pre-cipitated in the reaction solution due to their low solubility at the given reaction pH. While the solubility of the ${\alpha}-keto$ acid substrates is dependent on temperature, the solubility of the unnatural L-amino acid products is dependent on the reaction pH. As the solubility difference between substrate and product at the given reaction pH is therefore larger at higher temperature, the thermophilic transaminase was successfully used to shift the reaction equilibrium toward rapid product formation.

• Journal of the Korean Chemical Society
• /
• v.20 no.4
• /
• pp.260-265
• /
• 1976

The conductances of dilute solutions of LiCl, NaCl and KCl in a series of isopropanol-water mixtures were determined at $30^{\circ}C$. The values of equivalent conductance agreed well with Debye-Huckel-Onsager equation and the limiting equivalent conductance was greatly reduced as the isopropanol content of the solvent was increased in accord with predictions based on solvent viscosity and dielectric properties. Also, the limiting equivalent conductance increased in sequence ${\Lambda}_{0,LiCl} < {\Lambda}_{0,NaCl} < {\Lambda}_{0,KCl} in 0.0, 0.1 and 0.2 mole fraction isopropanol, but {\Lambda}_{0,LiCl} < {\Lambda}_{0,KCl} < {\Lambda}_{0,NaCl} in 0.3 mole fraction ispropanol. The maximum Walden product, {\Lambda}_{0{\eta}0}$ was found in 0.1 mole fraction isopropanol for all electrolytes.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.417-422
• /
• 2011

The low temperature pyrolysis of ABS resin has been carried out in a batch reactor under the atmospheric pressure. The effect of the reaction temperature on the yield of pyrolytic oils has been determined in the present study. The oil products formed during pyrolysis were classified into gas, gasoline, kerosene, gas oil and heavy oil according to the petroleum product quality standard of Ministry of Knowledge Economy. The conversion reaches 80% after 60 min at $500^{\circ}C$ in the pyrolysis of ABS resin. The amount of the final product was ranked as gas heavy oil > gasoline > gas oil > kerosen based on the yield. The yields of heavy oil and gas oil increase with an increase in the reaction time and temperature.

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.1007-1011
• /
• 2011

Dioctyl succinates and succinic anhydride were synthesized from succinic acid in the presence of a cation exchange resin, Amberlite IR-120. The synthesis of dioctyl succinate from succinic acid and octanol was perfomed in 18 h reflux condition with Amberlite IR-120 and the isolated yield of product was over 90%. For the synthesis of succinic anhydride, succinic acid was refluxed in isopropenyl acetate for 18 h with Amberlite IR-120 as a catalyst. The long reaction time was significantly reduced to less than 10 min under microwave irradiation. The catalyst was reusable at least 4 times with keeping product yield of higher than 80%.

• Safety and Health at Work
• /
• v.10 no.1
• /
• pp.114-121
• /
• 2019

Background: The photolithography process in the semiconductor industry uses various chemicals with little information on their constitution. This study aimed to identify the chemical constituents of photoresist (PR) products and their by-products and to compare these constituents with material safety data sheets (MSDSs) and analytical results. Methods: A total of 51 PRs with 48 MSDSs were collected. Analysis consisted of two parts: First, the constituents of the chemical products were identified and analyzed using MSDS data; second, for verification of the by-products of PR, volatile organic compounds were analyzed. The chemical constituents were categorized according to hazards. Results: Forty-five of 48 products contained trade secrets in amounts ranging from 1 to 65%. A total of 238 ingredients with multiple counting (35 ingredients without multiple counting) were identified in the MSDS data, and 48.7% of ingredients were labeled as trade secrets under the Korea Occupational Safety and Health Act. The concordance rate between the MSDS data and the analytical result was 41.7%. The by-product analysis identified 129 chemicals classified according to Chemical Abstracts Service No., with 17 chemicals that are carcinogenic, mutagenic, and reprotoxic substances. Formaldehyde was found to be released from 12 of 21 products that use novolak resin. Conclusion: We confirmed that several PRs contain carcinogens, and some were not specified in the toxicological information in the MSDS. Hazardous chemicals, including benzene and formaldehyde, are released from PRs products as by-products. Therefore, it is necessary to establish a systematic management system for chemical compounds and the working environment.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.186-190
• /
• 2014

Nuclear Power Plants require the control ability of chemical condition (pH) because pH control during transient accident such as LOCA makes an able the fission product removal capability to be maintained, stress corrosion cracking of stainless steel equipment to be prevented and the production of hydrogen by aluminum and zinc to be minimized. An NPP is designed to control the pH of containment spray and sump coolant using the spray additives 30% NaOH in the event of loss of coolant accident. In this paper, the pH of sump coolant of an NPP during LOCA was analyzed and the fission products removal constant and decontamination factor were calculated according to Standard Review Plan 6.5.2 related to spray chemical conditions of pH. The calculated pH value of recirculation mode using the computer code corresponds to 8.09~9.67, which meets the chemical environment regulation requirements. The fission product removal capability caused by containment spray system is performed to provide input to radiation analysis.