• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.78-83
• /
• 2001

To use the by-products of whelk processing, whelk internal organ with the addition of bromelain were used to make jeotgal, Korean traditional salted and fermented seafood sauce. The products were prepared at different salt concentrations of 10, 15 and 20% with various bromelain contents 0, 0.01, 0.1 and 0.5%. The samples were stored at $10^{\circ}C$ and the chemical and microbiological analyses were evaluated for four weeks. The initial pH (near 6.1) in all conditions decreased in the beginning stage of aging, then gradually increased until three weeks and finally decreased to $5.6{\sim}6.0$. The sample with lower salt concentration showed less pH change For two weeks. The samples treated with higher bromelain in 10% and 15% salt concentration showed higher pH values after 4 weeks compared to the nontreated control. Amino nitrogen in the samples increased at lower salt concentration and at higher bromelain content. The amino nitrogen showed maximum value, 780 mg%, at 10% salt and 0.5% bromelain treatment. Total nitrogen contents increased with aging periods, especially increased rapidly in high concentrations of bromelain treated samples at early stages of aging. The higher salt concentrations in the product decreased the total microbial number and lactic acid bacterial number.

• Journal of Digital Convergence
• /
• v.14 no.12
• /
• pp.555-560
• /
• 2016

This study attempted to secure competitiveness in the cosmetics market and provide basic data needed to promote sales and PR after reflecting consumer demands and needs in the development of cosmeceuticals. For this, it investigated their perception regarding the ingredients and efficacies of cosmeceuticals and repurchase intention among a total of 193 adults in their 20-50s who have had prior experience of buying these types of products from an online shopping mall as the importance of cosmeceuticals is emerging. According to a survey on consumer perceptions regarding the ingredients of cosmeceuticals by gender, there was a clear difference between men and women. In particular, when asked about the ingredients of whitening cosmetics, the percentage of male respondents was as low as 30.8% with a significant difference between men and women (t=31.688,p<0.001). In addition, most consumers were very aware of the efficacies of the ingredients of cosmeceuticals on the skin. In terms of actual repurchase intention, however, a significant difference was found by gender and product type in 3 different cosmeceuticals. In other words, men were lower than women in terms of awareness of cosmeceuticals and repurchase intention. Therefore, the development of a plan which satisfies both men and women, easily labels ingredients and meets consumer needs and demands through proper pricing policy are needed during the development of cosmeceuticals.

• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.551-556
• /
• 2015

Iksan370 is a long-spike wheat developed by the Rural Development Administration yielding excellent features components such as cold resistance, disease resistance, and viviparous germination. The physicochemical and material properties of the raw wheat and milled flour of Iksan370 were analyzed to derive its appropriate uses. The raw wheat of Iksan370 showed high contents of ash and proteins at 1.71% and 13.7%, respectively. Its test weight of 763.0 g/L was similar to those of other varieties and its 1,000 kernel weight was high at 45.38 g. The milled flour of Iksan370 had an ash content of 0.45%, which corresponds with a class 1 flour, and its protein content is 12.18%, corresponding with strong flour. The damaged starch was 5.41%, which was lower than that of other varieties. The average grain size was $70.67{\mu}m$ and the grain distribution was at the level of a typical hard wheat. In the farinogram, the water absorption was 58.63%, which corresponded to the level of medium flour. The development time was 7.00 minutes, which was significantly lower than those of Jokyung and Keumkang. The degree of softening was 67.00 BU, similar to those of Yunbaek and Baekjoong. Among the physico-chemical characteristics, the high protein content and typical hard wheat grain distribution of Iksan370 were similar to those of strong wheat, usually used for bread making. However, in the farinogram, the dough development time was short and the degree of softening was high. As a result, Iksan370 was expected to have poor breadmaking properties and a small volume of the final bread product due to insufficient dough durability. On the other hand, Iksan370 showed the highest maximum gelatinization viscosity at 864.00 BU. Therefore, Iksan370 is expected to show glutinous texture when used for noodles and its flour appears to be appropriate for frying powders as well.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.315-322
• /
• 2012

Alkali-activated slag (AAS) is the most obvious alternative materials that can replace OPC. But, AAS industrial usage as a structural material should be evaluated for its durability. Carbonation resistance is one of the most important factors in durability evaluation. Test results for 18 slag-based mortars activated by sodium silicate and 6 OPC mortars were obtained in this study to verify the carbonation property. Main variables considered in the study were flow, compressive strength before and after carbonation, and carbonation depth. Mineralogical and micro-structural analysis of OPC and AAS specimens prior to and after carbonation was conducted using XRD, TGA, FTIR FE-SEM. Test results showed that CHS was major hydration products of AAS and, unlike OPC, no other hydration products were found. After carbonation, CSH of hydration product in AAS turned into an amorphous silica gel, and alumina compounds was not detected. From the analysis of the results, it was estimated that the micro-structures of CSH in AAS easily collapsed during carbonation. Also, the results showed that this collapse of chemical chain of CSH lowered the compressive strength of concrete after carbonation. By increasing the dosage of activators, carbonation resistance and compressive strength were effectively improved.

• Journal of Environmental Science International
• /
• v.16 no.10
• /
• pp.1203-1208
• /
• 2007

Feathers are produced in huge quantities as a waste product at commercial poultry processing plants. Since feathers are almost pure keratin protein, feather wastes represent an alternative to more expensive dietary ingredients for animal feedstuffs. Generally they become feather meal used as animal feed after undergoing physical and chemical treatments. These processes require significant energy and also cause environmental pollutions. Therefore, biodegradation of feather by microorganisms represents an alternative method to prevent environment contamination. The aim of this study was to investigate cultural conditions affecting keratinolytic protease production by Bacillus pumilus RS7. We also assessed the nutritive value of microbial and alkaline feather hydrolysates, The composition of optimal medium for the keratinolytic protease was fructose 0.05%, yeast extract 0.3%, NaCl 0.05%, K2HPO4 0.03%, KH2PO4 0.04% and MgCl2 6H2O 0.01%, respectively. The optimal temperature and initial pH was $30^{\circ}C$ and 9.0, respectively. The keratinolytic protease production under optimal condition reached a maximum after 18 h of cultivation. Total amino acid content of feather hydrolysates treated by NaOH and B. pumilius RS7 was $113.8\;{\mu}g/ml$ and $504.9\;{\mu}g/ml$, respectively. Essential amino acid content of feather hydrolysates treated by NaOH and B. pumilius RS7 was $47.2\;{\mu}g/ml$ and $334.0\;{\mu}g/ml$, respectively. Thus, feather hydrolysates have the potential for utilization as an ingredient in animal feed.

• Korean journal of applied entomology
• /
• v.56 no.4
• /
• pp.395-402
• /
• 2017

Overuse of synthetic pesticides caused negative side-effects such as environmental contamination, development of insect pests' resistance, and effects on non-target organisms. Plant origin substances without/or with low mammalian toxicity have been considered as promising alternatives to the synthetic pesticides. Fumigant toxicity of the essential oil of Iranian Yarrow, Achillea millefolium L., was investigated against a cosmopolitan stored-product insect pest: saw-toothed grain beetle (Oryzaephilus surinamensis L.). Chemical profile of this essential oil was studied by Gas Chromatography-Mass Spectrometry. Tested concentrations were significantly effective to the mortality of insect pest. A positive correlation between essential oil concentrations and pest mortality were realized. LC50 value (lethal concentration needed to 50% mortality) was achieved as $17.977(16.195{\pm}20.433){\mu}l/l$ air. The main components were 1,8-Cineole (13.17%), nerolidol (12.87%), ${\alpha}$-cubebene (12.35%), artemisia ketone (6.69%), ${\alpha}$-terpineol (5.27%), alloaromadendrene oxide (4.71%) and borneol (3.99%). Terpenic compounds including monoterpene hydrocarbons (8.19%), monoterpenoids (44.23%), sesquiterpene hydrocarbons (21.69%) and sesquiterpenoids (22.24%) were 96.35% of the total identified compounds. Results indicated that the terpene-rich A. millefolium essential oil may be considered as a safe bio-agent in the O. surinamensis management.

• Korean Journal of Optics and Photonics
• /
• v.20 no.6
• /
• pp.346-353
• /
• 2009

Glucose and protein in urine are among the important substances for urine analysis and have generally been measured based on a reagent strip test. In this study, these two substances were measured using mid-infrared absorption spectroscopy. Samples were prepared from a commercial synthetic urine product. Glucose and albumin were added as well as red blood cells, which are expected to create the most spectroscopic interference of any substance. Concentrations of these substances were varied independently. Optimal wavelength regions were determined from a partial least squares regression analysis (glucose 980 - 1150/cm, albumin 1400 - 1570/cm). Interference by other substances increased the differences between measured and predicted values. Albumin measurement in particular weres heavily influenced by the presence of glucose and red blood cells. Depending on the inference by other substances, measurement errors were 29.85${\sim}$45.19 mg/dl for a glucose level between 0 and 1000 mg/dl and 14.0${\sim}$93.11 mg/dl for an albumin level of 0 ${\sim}$ 500 mg/dl. Our study proposes an alternative to the chemical test-strip analysis, which shows only discrete concentration levels.

• Journal of Digital Convergence
• /
• v.15 no.4
• /
• pp.549-554
• /
• 2017

This study conducted a survey on 319 Chinese women in their 20s to 50s living in three large cities in China, with an aim to analyze the influence on the purchasing behavior and satisfaction for Korean cosmetics depending on their complex purchasing tendencies. According to the research, the rational tendency was higher when the subjects were over 40 years old and married, and the impulsive tendency was the highest in those in their 30s. There was no huge difference in regions depending on the two tendencies, while there were statistically significant differences in purchasing period, times and costs when buying cosmetics. In addition, purchasing satisfaction for cosmetics had a positive correlation with purchasing tendencies. The subjects pursued convenience in purchasing as their rational tendency was higher, while they sought the trends as their impulsive tendency was higher. Based on the results, it is expected to maximize purchasing satisfaction of Chinese female consumers depending on their purchasing tendencies, if the Korean cosmetics makers provide reliable quality assurance, product exchange and customer management services. It is also expected to help revitalize the beauty market for China as well as Southeast Asia, if the Korean cosmetics companies implement differentiated marketing strategies targeting the customers in the age group with the impulsive consumption tendency.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.259-279
• /
• 1996

최근 정보·전자산업의 발전으로 고 신뢰성 전자재료에 대한 수요가 증대되고 있으며 이러한 첨단산업의 기반의 될 신소재 중 전자세라믹스가 차지하는 비중이 그 대부분을 차지하고 있으며 이에 대한 수요와 기대가 점점 커지고 있다. 이러한 전자세라믹스는 유전재료, 자성재료, 압전재료, 도전성 재료 등으로 나뉘게 된다. 어떠한 분류에 들어가든 그 조성은 금속의 산화물 형태가 일반적이며 미세한 분말의 성형체를 소결(sintering) 함으로써 최종제품으로 완성된다. 이러한 전잣라믹스가 최근 요구되는 고 신뢰성, 고 밀도화를 달성하기 위해선 원료 분말 제조단계부터 제어가 필요하다. 원료분말의 균일·균질성과 그 입도는 소결특성 뿐만아니라 전기적 특성에도 큰 영향을 미치기 때문이다. 세라믹스의 분말제조 방법 중 일반적으로 사용되는 방법으로는 고상 산화물을 혼합하여 하소(calcination)한 후 분쇄하는 '고상합성법'과 금속의 염 또는 alkoxide 용액을 이용하여 화학적으로 제조하는 '습식 화학적 합성법'이 있다. 고상합성법은 합성온도가 높고 기계적 분쇄와 혼합에 의존하므로 균일·균질성이 떨어지고 분말크기를 1㎛ 이하로 만들기 힘들다. 반면에 습식화학적 합성법은 기계적인 분쇄와 혼합에선 얻을 수 없는 원자 혹은 분자단위의 균일한 혼합과 submicron 이하의 미세한 분말을 얻을 수 있다. 따라서 이러한 습식 화학적 합성으로 얻은 분말을 사용하면 미세한 입자의 특성으로 인해 소결온도를 낮출 수 있으며 균일한 미세구조와 균질한 조성을 갖게되어 기계적·전기적 물성증진도 가져올 수 있게 된다. 습식 화학적 분말합성법은 전술하였듯이 alkoxide의 가수분해를 이용하는 sol-gel 법과 금속의 염(salt) 용액을 이용하여, 화학적으로 화합물 침전을 얻거나 또는 공침전물(coprecipitate) 형태의 분말을 얻는, 침전법으로 나뉠 수 있다. 침전법의 근본원리는 pH 및 pCO3 등에 따른 이온종의 용해도 차이를 이용하는 것으로써 각 이온종에 따른 solubility product(ksp)를 이용하여 설명된다. 본 연구에서는 침전법을 사용한 Ba-, Pb-계 전자세라믹스의 분말합성에 대한 이론적 고찰과 공정개발 및 실험을 통한 물성증진 효과에 대해 알아보았다. 본 실험상의 전자세라믹스 조성은 강유전체, 세라믹반도체, 압효과에 대해 알아보았다. 본 실험상의 전자세라믹스 조성은 강유전체, 세라믹 반도체, 압전재료로 널리 사용되는 BaTiO3, PZT(PbZrO3-PbTiO3)와 수직 자기기록매체로 큰 가능성이 있으며 hard ferrite로 널리쓰이는 Ba-feerite(BaFe12O19)로써 수산화물 형태의 침전에 대한 기구(mechanism)와 물성에 대해 살펴보았다. 이러한 침전법에 의한 분말합성 과정에는 소결체의 물성에 영향을 미치는 pH 조절제나 원료에서 혼입될 수 있는 Na+, K+, Cl-, SO4- 등의 제거(washing 혹은 filtering)가 필수적이다. 그러나 침전법에서 얻게 되는 분말은 매우 미세하여 colloid를 형성하게 되며, 이러한 colloid 상태의 미세한 침전입자가 filtering media에 끼이게 되어 견고하면서도 상당한 부피를 가지는 filter cake을 형성하기 때문에 filtering에 많은 시간과 다량의 filtering agent (본 실험의 경우엔 증류수)가 필요하게 된다. 따라서 이러한 문제점을 해결하기 위하여 colloid 상태의 침전물을 얼렸다 녹이는 freezing process를 개발, 적용하여 그 원리 및 효과, 그로인한 분말형태를 관찰하여 보았다.

• Journal of Radiation Protection and Research
• /
• v.42 no.1
• /
• pp.33-41
• /
• 2017

Background: Phosphate rock and its by-product are widely used in various industries to produce phosphoric acid, gypsum, gypsum board, and fertilizer. Owing to its high level of natural radioactive nuclides (e.g., $^{238}U$ and $^{226}Ra$), the radiological safety of workers who work with phosphate rock should be systematically managed. In this study, $^{238}U$, $^{232}Th$, $^{226}Ra$, and $^{40}K$ levels were measured to analyze the transport characteristics of these radionuclides in the production cycle of phosphate rock. Materials and Methods: Energy dispersive X-ray fluorescence and gamma spectrometry were used to determine the activity of $^{238}U$, $^{232}Th$, $^{226}Ra$, and $^{40}K$. To evaluate the extent of secular disequilibrium, the analytical results were compared using statistical methods. Finally, the distribution of radioactivity across different stages of the phosphate rock production cycle was evaluated. Results and Discussion: The concentration ratios of $^{226}Ra$ and $^{238}U$ in phosphate rock were close to 1.0, while those found in gypsum and fertilizer were extremely different, reflecting disequilibrium after the chemical reaction process. The nuclide with the highest activity level in the production cycle of phosphate rock was $^{40}K$, and the median $^{40}K$ activity was $8.972Bq{\cdot}g^{-1}$ and $1.496Bq{\cdot}g^{-1}$, respectively. For the $^{238}U$ series, the activity of $^{238}U$ and $^{226}Ra$ was greatest in phosphate rock, and the distribution of activity values clearly showed the transport characteristics of the radionuclides, both for the byproducts of the decay sequences and for their final products. Conclusion: Although the activity of $^{40}K$ in k-related fertilizer was relatively high, it made a relatively low contribution to the total radiological effect. However, the activity levels of $^{226}Ra$ and $^{238}U$ in phosphate rock were found to be relatively high, near the upper end of the acceptable limits. Therefore, it is necessary to systematically manage the radiological safety of workers engaged in phosphate rock processing.