• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1867-1870
• /
• 2013

• Bulletin of the Korean Chemical Society
• /
• v.30 no.10
• /
• pp.2191-2192
• /
• 2009

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.343-348
• /
• 2010

The surface of low density polyethylene (LDPE) film was oxyfluorinated under different reaction conditions to introduce hydroperoxide groups and change surface characteristics. Hydroperoxide functional groups created by oxyfluorination were used as active sites for graft polymerization with hydrophobic monomer, acryl amide (AM), and hydrophilic monomer, methyl methacrylate (MMA) to carry out the second modification of the LDPE film surface. The surface properties of the OFPE films and grafted OFPE films were characterized by 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging method, ATR-IR, contact angle measurement and DSC. From the results of DPPH method, the amount of hydroperoxide groups on the oxyfluorinated LDPE film continuously increased as the total pressure in the oxyfluorination and the partial pressure of fluorine gas increased. The water contact angle and surface free energy measurements showed that hydrophilic liquid (water) contact angle on LDPE film surface decreased with hydrophilic AM grafting and hydrophobic liquid (methylene diiodide) contact angle on LDPE film surface decreased with hydrophobic MMA grafting. These were attributed to AM or MMA monomer grafting and the wettability of LDPE filmsurface to hydrophilic and hydrophobic liquids were improved.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3377-3381
• /
• 2011

In this work, the amine grafting treated activated carbons were studied for carbon dioxide adsorbent. The surfaces of activated carbon were functionalized by 3-chloropropyltrimethoxysilane, which was subsequently grafted with amine compounds tris-(2-aminoethyl)amine and tri-ethylenetetramine and subjected to comparison. The surface functional groups of the amine grafted activated carbons were characterized using XPS. The textural properties of the amine grafted activated carbons were analyzed by $N_2$/77 K isotherms. Carbon dioxide adsorption behaviors of the amine grafted activated carbons were examined via the amounts of carbon dioxide adsorption at 298 K and 1.0 atm. From the results, tris-(2-aminoethyl)amine grafted activated carbons showed 43.8 $cm^3$/g of carbon dioxide adsorption while non-treated activated carbons and triethylenetetramine grafted activated carbons showed less carbon dioxide adsorption. These results were thought to be due to the presence of isolated amine groups in the amine compounds. Tris-(2-aminoethyl)amine grafted activated carbons have basic features that result in the enhancement of adsorption capacity of the carbon dioxide molecules, which have an acidic feature.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.497-500
• /
• 2008

Polystyrene foam (styrofoam) was treated with low-temperature oxygen plasma by means of immobilization and grafting techniques in order to modify its hydrophobic surface property to hydrophilic one using hydrophilic monomers of acrylic acid and acrylamide, and its surface chemical structure, morphology, and hydrophilicity were examined by ESCA, field emission scanning electron microscope (FESEM), and contactangle meter. The experimental evidences, such as the increases of O/C and N/C ratios in ESCA spectrum, thin film deposition, decrease in contact-angle, strongly suggested that the plasma treatments were useful methods for the preparation of hydrophilic surface. Contact angle diminished drastically from $84^{\circ}$ to $18{\sim}19^{\circ}$. Acrylamide, compared to acrylic acid, appeared to play a decisive role, and to be more powerful agent for improving its surface hydrophilicity.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.180-184
• /
• 2015

PP-grafted GO was prepared by the reaction of graphene oxide (GO) containing 2-bromoisobuyryl groups and polypropylene (PP) having hydroxyl groups (PP-OH) via a "grafting-to" method. GO-Br was synthesized by the reaction of GO and 2-bromoisobutyryl bromide under a basic condition. PP-MAH was reacted with ethanolamine to produce PP-OH. The melting temperature of PP-grafted GO was shifted to the higher temperature than that of PP-OH. Also, the thermal stability of PP-grafted GO was increased as compared to PP-OH and GO. These results demonstrated that the grafted coating polymer PP was effective for enhancing the thermal stability of GO. The higher surface roughness of PP-grafted GO was resulted from the chemical attachment of PP on the surface of GO. The characterization of PP-grafted GO was conducted from Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electron microscope (SEM).

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.978-982
• /
• 2011

In order to enhance the target action of chitosan-based drug, this paper firstly prepared phenylalanyl-glycylchitosan (Phe-Gly-CS) by grafting the key intermediate, bromoacetyl-phenylalanine (BA-Phe) onto chitosan. Then the target sugar molecule, lactobionic acid (LA), was grafted to Phe-Gly-CS and the topic compound lactobionic acid grafted phenylalanyl-glycyl-chitosan (Phe-Gly-CS-LA) was finally obtained in a yield of 78.8%. The product were characterized by FTIR, MS and 1H NMR. The preparing condition of BA-Phe was optimized as follows: the best pH was 10-11, the optimum temperature was $-4^{\circ}C$, the reaction time was 1.5 h.

• Textile Coloration and Finishing
• /
• v.20 no.5
• /
• pp.28-34
• /
• 2008

PET fabrics were photografted under continuous UV irradiation with vinyl pyrrolidone (VP) and acryloylmorpholine(ACMO) as monomers and benzophenone as a hydrogen-abstractable photoinitiator. ACMO can be grafted onto the PET fabrics more efficiently than VP. The grafted PET surfaces were characterized by ATR, ESCA, SEM and zeta potential measurement. ATR and ESCA analysis indicated significant alterations on chemical structure and atomic composition on the surface of the grafted fabrics, where nitrogen content increased with increasing grafting yield. SEM images showed that the fabric surface was covered with the grafted polymers. The zeta potentials and the water wettability of the grafted PET increased with grafting. Also the photografted fabrics showed an increased dyeablity to reactive dyes and increased affinity to various iodine species which imparted anti-bacterial properties.

• Textile Coloration and Finishing
• /
• v.20 no.4
• /
• pp.1-7
• /
• 2008

Methacryloxypropyl trimethoxysilane (MAPTMS), a hybrid organic-inorganic monomer, was photografted onto PET fabric using benzophenone (BP) as a photoinitiator. It was found that a UV energy of 43.2J/$cm^2$ was required to optimally photograft the MAPTMS onto PET fabrics which was applied with an aqueous formulation of 10% MAPTMS, 20% BP and 0.5% N-Methyldiethanol amine (MDEA). The MDEA additive was efficient in reducing atmospheric oxygen inhibition of polymer radicals which eliminated compulsory nitrogen inerting. The surface grafting of PET fabrics was verified by fourier transform infrared spectroscopy (FT-IR) and scanning electron spectroscopy (SEM). The grafted PET fabrics with the hybrid monomer showed higher thermal stability due to the introduced silane component in the monomer as ascertained by higher char content at 800$^{\circ}C$, which increased to 14.5% for the 15.8% grafting compared to 8.2% for the untreated.

• Journal of the Korean Ceramic Society
• /
• v.54 no.2
• /
• pp.102-107
• /
• 2017

The dependence of the IR optical properties of PMMA/$Al_2O_3$ nanocomposite on the alumina content was investigated in the wavelength range of $3500-2800cm^{-1}$. The samples were prepared via emulsion polymerization technique using oleic acid as a coupling agent. Grafting density calculations were carried out by means of elemental analysis CHN to yield the best coupling agent content. FTIR analysis confirmed the existence of a chemical bond between aluminum oxide and oleic acid. The outcomes of XRD analyses showed the presence of cubic gamma aluminum oxide in the nanocomposite, in contrast to the amorphous nature of PMMA. TEM images showed the core-shell morphology of the particles other than pristine PMMA. Optical constants of the nanocomposite were calculated based on FTIR spectra and the Kramers-Kronig equations. The presence of nano alumina modified some of the optical indexes in IR region.