• Journal of Life Science
• /
• v.10 no.2
• /
• pp.202-209
• /
• 2000

The factors affecting chemical composition of green tea (Camellia sinensis L.) during extraction process were temperatures and times. The optimum extraction conditions were measured in relation to the changes of chemical compositions from water extracts of green tea (Camellia sinensis L.) under different extraction temperatures (50, 70, 9$0^{\circ}C$) and extraction times (1, 3, 5 minute). The change of color intensity during browning reaction, flavonoid components, contents of total phenols and hydrogen donating activity (reducing activity for $\alpha$, $\alpha$'-diphenyl-$\beta$ -picryhydrazyl) of water extracts form green tea increased as extraction temperatures increased from 50 to 9$0^{\circ}C$ and extraction times prolonged from 1 to 5 min. The contents of important free sugars such as sucrose and glucose slightly increased as the extraction time was prolonged, while little difference in the content of fructose with the prolonged extraction time. Catechins contents extracted from the commercial steamed green tea were increased at higher temperature and longer extraction time. Epigallocatechin (EGC) extracted from 9$0^{\circ}C$ (extraction time 5 min). presented 99.9 mg/g in highest composition of catechin followed by epigallocatechin gallate (EGCg), epicatechin (EC), epicatechin gallate (ECg). The content of vitamin C extracted from green tea was increased about 2 times as the extraction temperature increased from 50 to 9$0^{\circ}C$ and as the extraction time increased from 1 to 5 min. with exception at 9$0^{\circ}C$(extraction time:5 min) which showed less vitamin C content than 7$0^{\circ}C$(extraction time : 3 min) probably due to possible destruction of vitamin C by high temperature.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.6
• /
• pp.447-453
• /
• 2004

Optimal conditions for the supercritical carbon dioxide $(scCO_{2})$ extraction of glycyr­rhizin from licorice (Glycyrrhiza glabra) were investigated, with an emphasis on the types and levels of modifiers. The morphology of the licorice tissue remaining after the $scCO_{2} $ extraction of glycyrrhizin was examined by scanning electron microscopy, coupled with measurements of ab­solute density. Conventional organic solvent extraction was also carried out for purpose of quantitative comparison. At 50 MPa and $60^{circ}C$ glycyrrhizin could not be extracted with pure $scCO_{2}$, while a considerable amount of glycyrrhizin was extracted when water was added to $scCO_{2}$ as a modifier. The highest recovery was found to be about $97\%$ when $70\%$ aqueous methanol was added to $scCO_{2}$ at a concentration of $15\%$. The optimal pressure and temperature for the supercritical fluid extraction of glycyrrhizin were observed to be 30 M Pa and $60^{circ}C$, respectively. Under these conditions, the percentage recovery of glycyrrhizin attained a maximum value of 102.67\pm$ $1.13\%$ within 60 min. Furthermore, in the case of $scCO_{2}$ modified with $70\%$ aqueous methanol, the licorice tissue obtained after extraction was found to be severely de­graded by excessive swelling, and the absolute density of the licorice residues was observed to be the highest.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.258-261
• /
• 2009

In this work, we the ettect on extraction amounts and general composition content of phytoestrogen genistein and formononetin extracted from Sophoraflavescens Aiton by various ultrasonic waves(35, 72, and 170 KHz) and extraction time(30, and 60 min) were compared using extraction solvent water 100%. The pretreatment step was composed of ultrasonic waves extraction, filtration, concentration, and membrane filtration. The extracted sample was analyzed by reversed-phase high performance liquid chromatography(RP-HPLC). And the mobile phase applied was linearly changed with A/B of 80/20~65/35 vol% for 60 min(A water/acetic acid, 99.9/0.1 vol%, B acetonitrile/acetic acid, 99.9/0.1 vol%). The experimental results, general composition carbohydrate(0.255 to 0.413%) excepts, other ingredients was confirmed almost similarly. Also, The highest yield of extraction amount 3.17g was obtained by ultrasonic waves with a frequency of 170 KHz and an extraction time of 60 min. This work offers would be useful for chemical and biological studies of natural plants and its products.

• KSBB Journal
• /
• v.19 no.6 s.89
• /
• pp.421-426
• /
• 2004

The extraction and separation of isoflavones from Korean soybean were peformed by various mechanical and chemical extraction methods. They included solvent extraction, stirring, supersonification and sub/supercritical water extraction. From the experimental results of the variation of solvent extraction by change in composition, the increase in extraction of a specific compound by stirring or supersonic energy, and the application of supercritical fluid with superior solvating power over solvents, the sonification was the most desirable extraction method in extracting aglycone isoflavones, daidzein and genistein from Korean soybean.

• Korean Chemical Engineering Research
• /
• v.54 no.6
• /
• pp.753-761
• /
• 2016

Liquid-liquid extraction (LLE) can be used for the recovery of acetic acid from black liquor prior to bioethanol fermentation. Recovery of value-added chemicals such as acetic-, formic- and lactic acid using LLE from Kraft black liquor was studied. Acetic acid and formic acid have been reported to be strong inhibitors in fermentation. The study elucidates the effect of three reaction parameters: pH (0.5~3.5), temperature ($25{\sim}65^{\circ}C$), and reaction time (24~48 min). Extraction performance using tri-n-octylphosphine oxide as the extractant was evaluated. The maximum acetic acid concentration achieved from hydrolyzates was 69.87% at $25^{\circ}C$, pH= 0.5, and 36 min. Factorial design was used to study the effects of pH, temperature, and reaction time on the maximum inhibitor extraction yield after LLE. The maximum potential extraction yield of acetic acid was 70.4% at $25.8^{\circ}C$, pH=0.6 and 37.2 min residence time.

• Membrane and Water Treatment
• /
• v.4 no.1
• /
• pp.11-25
• /
• 2013

Emulsion liquid membrane (ELM) process suffers from emulsion instability problem. So far, emulsion produced by mechanical methods such as stirrer and homogenizer has big size and high emulsion breakage. This paper discussed the application of emulsion produced by sonicator to extract cadmium in a batch ELM system. The emulsions consist of N,N-Dioctyl-1-octanamine (trioctylamine/TOA), nitrogen trihydride (ammonia/NH4OH), sorbitan monooleate (Span 80), and kerosene as carrier, stripping solution, emulsifying agent, and organic diluent, respectively. Effects of comprehensive parameters on extraction efficiency of Cd(II) such as emulsification time, extraction time, stirring speed, surfactant concentration, initial feed phase concentration, carrier concentration, volume ratio of the emulsion to feed phase, and pH of initial feed phase were evaluated. The results showed that extraction efficiencies of Cd(II) greater than 98% could be obtained under the following conditions: 15 minutes of emulsification time, 4 wt.% of Span 80 concentration, 4 wt.% of TOA concentration, 15 minutes of extraction time, 250 rpm of stirring speed, 100 ppm of initial feed concentration, volume ratio of emulsion to feed phase of 1:5, and initial feed pH of 1.53.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.445-449
• /
• 2015

This study was directed to finding an optimum extraction condition of genistein from the S. flavescens with supercritical carbon dioxide as a solvent. In this effort, effects of the extraction conditions including pressure, temperature and a co-solvent on the extraction efficiency were investigated. The aqueous ethanol and methanol solutions were used as co-solvents while the tested operating pressure and temperature ranges were from 200 bar to 300 bar and from 308.15 K to 323.15 K, respectively. The concentration of genistein was determined by means of HPLC equipped with a UV detector. From the results, it was observed that an increase in pressure led to the higher extraction efficiency. Further, methanol showed better performance as a co-slovent than ethanol. The DPPH radical scavenging activities were measured to compare antioxidant activities of S. flavescens extracts.

• Journal of the Korean Chemical Society
• /
• v.53 no.4
• /
• pp.427-431
• /
• 2009

The thermodynamical mechanism of the extraction of soybean isoflavones from soybean residuals using organic solvent method has been studied. On the basis of experiments, a simple model for determining the distribution coefficients in organic solvent extraction was employed to calculate the thermodynamical functions between $K,\;{\Delta}H^0,\;{\Delta}S^0\;and\;{\Delta}G^0$ in the soybean isoflavones extraction process. The results show that the soybean isoflavones extraction is an endothermic and an entropy-increasing process: the ${\Delta}G^0$ decreases when the temperature arises.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.1
• /
• pp.51-59
• /
• 2009

Natural Artemisia extraction was extracted from Artemisia component using diethyl ether as a solvent, and we tested various pharmacetical and chemical characteristics of this extract. Characteristic experiments to use natural Artemisia extract tested antimicrobial experiment using microbe in pharmacetical material, and tested dye experiment using fiber in chemical material. From the result of characteristics experiment, some conclusions are obtained as follow. From the result of extraction experiment, it obtained about 10.4%-Artemisia extraction ratio as semi-solid state, and after dried in freezing from Artemisia extract of semi-solid state, it obtained about 10%-Artemisia extraction ratio as solid state of dark blue-green color. From result of antimicrobial experiment of Artemisia extract, number of staphylococcus aureus (ATCC-01) and aspergillus niger (ATCC-02) in microbe decreased more and more according to time passage. This phenomenon showed that Artemisia extract influences to antimicrobial effect. From the result of dye experiment of Artemisia extract, it appeared in direction of dark blue-green color after dyed to use cotton and silk with fiber to control in pH 7.5. Specially the result which confirmed dye of fiber with optical electron microscope (OEM), we could know that it appears darker silk than cotton.

• Elastomers and Composites
• /
• v.34 no.3
• /
• pp.239-246
• /
• 1999

Side wall samples from a used automotive tire were subjected to subcritical and supercritical decomposition and extraction with three solvents, water, 28% ammonia solution and ammonia. For 6mm cube samples the rate of supercritical extraction with water followed a first-order kinetics with an activation energy of 140 kJ/mol. Solvent power of 28% ammonia so lotion at supercritical condition was found to be higher than supercritical water at initial extraction as pressure decreased. These phenomena were considered to be an effect of ammonia involved in water.