• 한국식품영양학회지
• /
• 제29권2호
• /
• pp.153-161
• /
• 2016

This study investigated the chemical composition of Solidago virga-aurea var. asiatica Nakai essential oils collected using different extraction methods. The essential oils obtained by simultaneous steam distillation extraction (SDE) and hydrodistillation extraction (HDE) methods from the aerial parts of Solidago virga-aurea var. asiatica Nakai were analyzed by GC and GC-MS. Ninety-nine volatile flavor compounds were identified in the essential oil produced from Solidago virga-aurea var. asiatica Nakai using the SDE method. These compounds were classified into eight categories in terms of chemical functionality: 26 hydrocarbons, 8 aldehydes, 36 alcohols, 7 ketones, 12 esters, 5 oxides and epixides, 4 acids, and a miscellaneous one. Spathulenol (15.66%) was the most abundant compound. Ninety-eight compounds including of 35 hydrocarbons, 6 aldehydes, 29 alcohols, 6 ketones, 10 esters, 4 oxides and epixides, 7 acids, and a miscellaneous one were identified in the essential oil from the plant using the HDE method. Hexadecanoic acid (24.74%) was the most abundant compound. The chemical composition of Solidago virga-aurea var. asiatica Nakai essential oils extracted by SDE and HDE methods are characterized by high content of sesquiterpene alcohols and acids, respectively. The extraction methods may be influenced in the chemical composition of natural plant essential oils.

• Bulletin of the Korean Chemical Society
• /
• 제28권2호
• /
• pp.276-280
• /
• 2007

In this work, caffeine and some catechin compounds + C, EC, EGC, and EGCG were extracted from green tea by using molecular imprinted polymers (MIP) as sorbent materials in a solid-phase extraction (SPE) process known as MISPE (molecular imprinted solid-phase extraction). For synthesis of MIP, caffeine was employed as the template, MAA as the monomer, EGDMA as the crosslinker, and AIBN as the initiator. A solution of caffeine (0.2 mg/mL in methanol) was utilized in the solid extraction cartridges following loading, washing, and elution procedures with acetonitrile, methanol, and methanol-acetic acid (90/10, %v/v) as the solvents, respectively. This solid-phase extraction protocol was applied for the extraction of caffeine and some catechin compounds from green tea. A comparison was made between the results obtained with the MIP cartridges and a traditional C18 reversed-phase cartridge. It was thereupon found that the recovery of caffeine by the MIPbased sorbent used in this work was almost two and four times greater than that by a commercially available C18 material. A quantitative analysis was conducted by high performance liquid chromatography (HPLC) using a C18 column (5 μm, 250 × 4.6 mm) with methanol/water (40/60, %v/v) as the mobile phase at a flow rate of 0.5 mL/min.

• Membrane and Water Treatment
• /
• 제12권2호
• /
• pp.75-82
• /
• 2021

This study aimed to prepare a W/O nonionic microemulsion system(MEs) consisting of OP-4[polyoxyethylene(4) nonylphenol], OP-7[polyoxyethylene(7) nonylphenol], 1-hexanol, D2EHPA, kerosene and HCl solution and applied to the extraction of La(III) from chloride aqueous solution within the polysulfone hollow fiber contactor (HFC),laboratory-scale experiments were carried out to investigate the recovery of La(III) using as-prepared microemulsion from the simulation wastewater containing La(III),Al(III) and Fe(III). The right weight ratio(Rs) of OP-4 to OP-7 was firstly confirmed through determination of the solubilization capacity of HCl solution(W0,HCl) in microemulsion, the effect of several factors such as the HCl concentration, temperature and effective extraction time on the extraction efficiency of La(III) was discussed. Results showed that the acceptable Rs was 4:6 to prepare the W/O MEs. The extraction yield of La(III) increased with the increasing of HCl concentration, temperature and effective extraction time and reaches to 97.3% while using five-stage modules. The recovery yield of La(III) from simulation La-bearing wastewater was 90.6%.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.545-550
• /
• 2012

최적의 추출조건을 찾는데 매우 유용한 방법인 반응 표면 분석법(RSM, response surface methodology)을 사용하여 새우껍질로부터 astaxanthin 추출조건을 최적화하였다. 추출조건은 용매 에탄올과 추출물질의 비율, 추출온도($^{\circ}C$), 추출시간(min)의 세가지 독립변수를 설정하여 BBD (Box-Behnken design) 방법을 이용하였다. 이 BBD 모델링은 0.9218의 $R^2{_{adj}}$값과 0.0003의 확률 값 p 값으로 회귀 모델에 대한 신뢰도를 입증하였다. RSM 분석을 통해 찾아낸 새우껍질로부터 astaxanthin의 최적 추출조건은 에탄올 용매비 1:29.7, 추출온도 $49.5^{\circ}C$, 추출시간 59.9 분이고, 이 때 astaxanthin 추출량은 $17.80{\mu}g/g$으로 예측하였다. 최적 수율로 예측된 결과는 각각의 조건에 따른 실험을 통해 그 예측의 정확도를 확인하였으며 $17.77{\mu}g/g$으로 예측조건과 비슷한 결과를 보였다.

• Journal of Ginseng Research
• /
• 제44권1호
• /
• pp.44-49
• /
• 2020

Background: Salting-out extraction (SOE) had been developed as a special branch of aqueous two-phase system recently. So far as we know, few reports involved in extracting ginsenosides with SOE because of the lower recovery caused by the unique solubility and surface activity of ginsenosides. A new SOE method for rapid pretreatment of ginsenosides from the enzymatic hydrolysates of Panax quinquefolium was established in this article. Methods: The SOE system comprising ethanol and sodium carbonate was selected to extract ginsenosides from the enzymatic hydrolysates of Panax quinquefolium, and HPLC was applied to analyze the ginsenosides. Results: The optimized extraction conditions were as follows: the aqueous two-phase extraction system comprising ethanol, sodium carbonate, ethanol concentration of 41.51%, and the mass percent of sodium carbonate of 7.9% in the extraction system under the experimental condition. Extraction time had minor influence on extraction efficiency of ginsenosides. The results also showed that the extraction efficiencies of three ginsenosides were all more than 90.0% only in a single step. Conclusion: The proposed method had been successfully applied to determine ginsenosides in enzymatic hydrolysate and demonstrated as a powerful technique for separating and purifying ginsenosides in complex samples.

• Journal of Microbiology and Biotechnology
• /
• 제6권5호
• /
• pp.358-360
• /
• 1996

Solvent extraction, soxhlet method, and supercritical fluid extracion were considered, respectively, as the method of choice for the recovery of DHA from lyophilized Thraustochitrium sp., and the results of corresponding extraction were compared. Supercritical fluid extraction seems to be the most appropriate process with respect to time, process simplicity, and extractant intoxicity.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1351-1355
• /
• 1998

A simple apparatus for adding a modifying solvent to supercritical CO2 extractant was described. Small, fixed volumes (typically 100 μL) of liquid modifying solvents were delivered during the extraction process by use of an in-line high pressure loop injector and an air pump. Without disconnecting the extraction cell from the supercritical fluid extraction system, the modifying solvent was repeatedly delivered. The solvent modification device was optimized during the extraction of carbaryl and bis(acetylacetonato) copper(Ⅱ). Extraction recoveries from spiked filter paper and soil samples ranged between 22% and 109%, depending on the analyte and matrix components. The addition of polar modifying solvents were necessary to improve the extractability of the nonpolar CO2.

• Elastomers and Composites
• /
• 제54권3호
• /
• pp.188-200
• /
• 2019

Rubber articles contain various organic additives such as antidegradants, curing agents, and processing aids. It is important to extract and analyze these organic additives. In this paper, various extraction methods of organic additives present in rubber composites were introduced (solvent extraction, Soxhlet extraction, headspace extraction, and solid-phase microextraction), and the extracts were characterized using gas chromatography/mass spectrometry (GC/MS). Solvent and Soxhlet extractions are easy-to-perform and commonly used methods. Efficiency of solvent extraction varies according to the type of solvent used and the extraction conditions. Soxhlet extraction requires a large volume of solvent. Headspace sampling is suitable for extracting volatile organic compounds, while solid-phase extraction is suitable for extracting specific chemicals. GC/MS is generally used for characterizing the extract of a rubber composite because most components of the extract are volatile and have low molecular weights. Identification methods of chemical structures of the components separated by GC column were also introduced.

• 대한화학회지
• /
• 제59권5호
• /
• pp.407-412
• /
• 2015

A preconcentration procedure for determination of palladium by laser thermal lens spectrometry (TLS) is proposed. It is based on cloud point extraction of palladium(II) ions as 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminoaniline (3,5-diCl-PADMA) complexes using octylphenoxypolyethoxyethanol (Triton X-114) as surfactant. The effects of various experimental conditions such as pH, concentration of ligand and surfactant, equilibration temperature and time on cloud point extraction were studied. Under the optimized conditions, the calibration graph was linear in the range of 0.15~6 ng mL⁻¹, and the detection limit was 0.04 ng mL⁻¹ with an enrichment factor of 22. The sensitivity was enhanced by 846 times when compared with the conventional spectrophotometric method. The recovery of palladium was in the range of 96.6%~104.0%. The proposed method was applied to the determination of palladium in water samples.

• Korean Chemical Engineering Research
• /
• 제58권2호
• /
• pp.273-279
• /
• 2020

본 연구에서는 바이오매스로부터 파클리탁셀 회수를 위한 전통적 용매 추출(conventional solvent extraction, CSE), 마이크로웨이브를 이용한 추출(microwave-assisted extraction, MAE), 초음파를 이용한 추출(ultrasound-assisted extraction, UAE) 방법을 비교하였다. 추출 용매 종류(아세톤, 클로로포름, 에탄올, 메탄올, 메틸렌 클로라이드)에 따른 영향을 조사한 결과, 메탄올이 모든 추출 방법에서 가장 적합하였다. 메탄올을 이용한 MAE와 UAE의 경우, 단 1회의 추출로 대부분의 파클리탁셀 회수(>95%)가 가능하였다. 또한 MAE와 UAE의 경우 추출 온도(25-45 ℃), 마이크로웨이브 파워(50-150 W), 초음파 파워(180-380 W)의 증가에 따라 파클리탁셀 회수율이 증가하였다. 또한 SEM 분석을 통해 바이오매스 표면을 조사한 결과, 표면 구조가 CSE의 경우에는 조금 주름진 형태를 보인 반면 MAE와 UAE의 경우에는 강한 충격으로 매우 거칠고 파괴된 형태를 보였다.