• Journal of the Korean Chemical Society
• /
• v.5 no.1
• /
• pp.56-59
• /
• 1961

Ion exchange procedure was studied for the separation of thorium from the acidic solution obtained by means of decomposition of monazite with alkali solution. Present cation exchange method consists of adsorption of cations from the sample solution (ca. 0.6N HCl acidic) onto Amberlite IR-120 resin, elution of all of the rare earth cations with 700 ml. of 2N Hydrochloric acid, and recovery of the thorium by elution with 200ml. of 6N sulfaric acid. Thorium recovery by the ion-exchange method mentioned above, was quantitative, and it is concluded that this ion-exchange method may be used not only for industrial separation of thorium from rare earths but also for quantitative determination of thorium with relative error, ${\pm}1.0.$.

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.133-136
• /
• 2015

The outward diffusion of $Na^+$ ions in iron-bearing soda lime silicate glass via oxidation heat treatment before the ion exchange process is artificially induced in order to increase the amount of ions exchanged during the ion exchange process. The effect of the addition process is analyzed through measuring the bending strength, the weight change, and the inter-diffusion coefficient after the ion exchange process. The glass strength is increased when the outward diffusion of $Na^+$ ions via oxidation heat treatment before the ion exchange process is added. For the glass subjected to the additional process, the weight change and diffusion depth increase compared with the glass not subjected to the process. The interdiffusion coefficient is also slightly increased as a result of the additional process.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.75-78
• /
• 1998

1. Introduction : The clean technology using ion exchange membranes have drawn attention increasingly with advancement of the membrane synthesis. Ion exchange membranes have been used for diffusion dialysis, electrodialysis, electrodialytic water splitting and electrodeionization. Bipolar membranes(BPM), consisting of a cation exchange layer and an an_ion exchange layer, can convert a salt to an acid and a base without chemical addition. Using the bipolar membrane, a large quantity of industrial wastes containing salts can be reprocessed to generate acids and bases. Recent development of high performance bipolar membranes enables to further expand the potential use of electrodialysis in the chemical industry. The water-splitting mechanism in the bipolar membrane, however, is a controversial subject yet. In this study bipolar membranes were prepared using commercial ion exchange membranes and hydrophilic polymer as a binder to investigate the effects of the interface hydrophilicity on water-splitting efficiency. In addition, the water splitting mechanism by a metal catalyst was discussed.

• Bulletin of the Korean Chemical Society
• /
• v.2 no.3
• /
• pp.86-89
• /
• 1981

The rate of the bromine-exchange reaction between gallium bromide and n-propyl bromide in 1,2,4-trichlorobenzene and in nitrobenzene was measured at 19, 25 and $40^{\circ}C$, using n-propyl bromide labelled with Br-82. The results indicated that the exchange reaction was second order with respect to gallium bromide and first order with respect to n-propyl bromide. The third-order rate constant determined at $19^{\circ}C$ is $2.9{\times} 10^{-2}l^2{\cdot}mole^{-2}{\cdot}sec^{-1}$ in 1,2,4-trichlorobenzene and $4.5{\times}10^{-3}l^2{\cdot}mole^{-2}{\cdot}sec^{-1}$. in nitrobenzene. The activation energy, the enthalpy of activation and the entropy of activation for the exchange reaction were also determined. Reaction mechanism for the bromine exchange of n-propyl bromide seemed to be similar to those observed in earlier studies with other alkyl bromides.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.65-68
• /
• 2004

Proton-exchange membranes have attracted much attention in the past few decades due to their important application in fuel cell systems. The mainly used proton-exchange membranes are perfluoropolymers such as DuPont's Nafion$^{(R)}$ and Asahi Chemical's Aciplex$^{(R)}$ because of their high performance including high proton conductivity ＆ mechanical strength, and excellent thermal ＆ chemical stability.(omitted)ted)

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.463-467
• /
• 2015

We investigated catalytic activity of ion-exchange resins in acetalization of 1,2-propylene glycol with acetaldehyde. The impacts of reaction variables, such as temperature, reaction time, catalyst loading and feedstock composition, on the conversion of 1,2-propylene glycol were measured. The life of the catalyst was also studied. Furthermore, the reaction kinetics of 1,2-propylene glycol acetalization was studied. It was found that reaction rate followed the first-order kinetics to acetaldehyde and 1,2-propylene glycol, respectively. Therefore, overall acetalization reaction should follow the second-order reaction kinetics, expressed as. Key words: 1,2-propylene Glycol, 2,4-dimethyl-1,3-dioxolane, Ion-exchange Resin, Polyhydroxy Compounds, Acetalization $r=kC^{nA}_AC^{nB}_B=19.74e^{\frac{-6650}{T}}C^1_AC^1_B$.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.115-115
• /
• 1999

In this work a new process was developed for the sulfonation of the chemicallly stable engineering polymer polyethersulfone as membrane materials for electrodialysis or a flow battery applications. Commercially available polyethersulfone polymer was partially sulfonated using a CSA sulfonating agent in a dichloromethane solvent, which sulfonated polyethersulfone with various sulfonation levels have been prepared. Sulfonated polyethersulfone (SPES) membranes with different ion capacities were prepared for the purpose of identifying cation exchange membrane properties, in an attempt to find a low cost replacement for Nafion, which most of the perfluorinated membranes, known to exhibit a prolonged service life, are expensive and difficult to process. The following features were determined: the degree of sulfonation, water uptake, thermal analysis, and electrochemical properties such as ion exchange capacities, resistivity, selectivity of ion permeation. The surface of the cation exchange membranes, decomposed with the H202-treatment, were observed by using scanning electron microscope. The area resistivities of SPES mebranes in 5N-NaOH decreased from $2,150{\;}{\Omega}-cm2$ to less than $15{\Omega}-cm2$ as the ion exchange capacity (IEC) increased from 0.62 to 1.73 millieequivlants per dry gram(meq/dg).eq/dg).

• Journal of Electrochemical Science and Technology
• /
• v.14 no.4
• /
• pp.303-310
• /
• 2023

Microbial fuel cells (MFCs) are a bioelectrochemical system where electrochemically active bacteria convert organic waste into electricity. Poly(vinyl alcohol) (PVA) and chitosan (CS) are polymers that have been studied as potential alternative ion exchange membranes to Nafion for many electrochemical systems. This study examined the optimal mixing ratio of PVA and chitosan CS in a PVA:CS composite membrane for MFC applications. PVA:CS composite membranes with 1:1, 2:1, and 3:1 ratios were synthesized and tested. The water uptake and ion exchange capacity, Fourier transform infrared spectra, and scanning electron microscopy images were analyzed to determine the physicochemical properties of PVA:CS membranes. The prepared membranes were applied to the ion exchange membrane of the MFC system, and their effects on the electrochemical performance were evaluated. These results showed that the composite membrane with a 3:1 (PVA:CS) ratio showed comparable performance to the commercialized Nafion membrane and produced more electricity than the other synthesized membranes. The PVA:CS membrane implemented MFCs produced a maximum power density of 0.026 mW cm^-2 from organic waste with stable performance. Therefore, it can be applied to a cost-effective MFC system.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1651-1655
• /
• 2013

Anion exchange membranes for a vanadium redox flow battery (VRB) were prepared by pore-filling on a PE substrate with the copolymerization of vinylbenzyl chloride (VBC) and glycidyl methacrylate (GMA). The ion exchange capacity, water uptake and weight gain ratio were increased with a similar tendency up to 65% of GMA content, indicating that the monomer improved the pore-filling degree and membrane properties. The vanadium ion permeability and open-circuit voltage were also investigated. The permeability of the VG65 membrane was only $1.23{\times}10^{-7}\;cm^2\;min^{-1}$ compared to $17.9{\times}10^{-7}\;cm^2\;min^{-1}$ for Nafion 117 and $1.8{\times}10^{-7}\;cm^2\;min^{-1}$ for AMV. Consequently, a VRB single cell using the prepared membrane showed higher energy efficiency (over 80%) of up to 100 cycles compared to the commercial membranes, Nafion 117 (ca. 58%) and AMV (ca. 70%).

• Membrane Journal
• /
• v.25 no.6
• /
• pp.515-523
• /
• 2015

While commercial polystyrene-based ion exchange membranes have simple manufacturing processes, they also possess poor durability due to their brittleness. Poly(ethylene glycol)methyl ether methacrylate with hydrophilic side chains of poly(ethylene glycol) was used as a co-monomer to make the membranes have improved flexibility. Hydrophilicity/hydrophobicity of the anion exchange membranes were able to be adjusted by varying the chain lengths of the poly(ethylene glycol). For the preparation of the anion exchange membranes, a porous PE substrate was immersed into monomer solutions and thermally polymerized. The prepared membranes were subsequently reacted with trimethylamine to produce anion exchange functional groups, Quaternary ammonium salts. The prepared pore-filled anion exchange membranes were evaluated in terms of ion exchange capacity, electric resistance, elongation at break and water uptake.